The FabricSheet type exposes the following members.
Properties
| Name | Description | |
|---|---|---|
 | AssemblyInstanceId |
The id of the assembly instance to which the element belongs.
(Inherited from Element) |
| BendFinalLoopOrientationVector | Direction of local Fabric Sheet Y axis in bending polyline LCS. |
| BentFabricBendDirection | Specifies which wire direction of the fabric sheet is bent. |
| BentFabricLongitudinalCutLength | Specifies the cut length of the fabric sheet perpendicular to the bend edge. |
| BentFabricStraightWiresLocation | Specifies the location of straight bars with respect to bent bars in the fabric sheet. |
| BoundingBox | Retrieves a box that circumscribes all geometry of the element. (Inherited from Element) |
| Category | Retrieves a Category object that represents the category or sub category in which the
element resides. (Inherited from Element) |
| CoverOffset | The additional cover offset of the Fabric Sheet. |
| CreatedPhaseId |
Id of a Phase at which the Element was created.
(Inherited from Element) |
| CutOverallLength | The sheet length after cutting has taken place. |
| CutOverallWidth | The sheet length after cutting has taken place. |
| CutSheetMass | The sheet mass after cutting has taken place. |
| DemolishedPhaseId |
Id of a Phase at which the Element was demolished.
(Inherited from Element) |
| DesignOption | Returns the design option to which the element belongs. (Inherited from Element) |
| DistributionOfWiresAtCover | The distribution of wires that is closest to the cover. |
| Document | Returns the Document in which the Element resides. (Inherited from Element) |
| FabricAreaOwnerId | The Fabric Area Id. |
| FabricHostReference | Controls if Single Fabric Sheet should be cut by the Host Cover |
| FabricLocation | The Fabric Sheet location in the host. |
| FabricNumber | Specifies the numerical parameter assigned to the fabric sheet and any sheet of the same type, dimension, material, shape, and partition. |
| Geometry | Retrieves the geometric representation of the element. (Inherited from Element) |
| GroupId |
The id of the group to which an element belongs.
(Inherited from Element) |
| HostId | The structure element that contains the Fabric Sheet. |
| Id |
A unique identifier for an Element in an Autodesk Revit project.
(Inherited from Element) |
| IsBent | The type of fabric sheet. True for bent fabric sheet, false for flat fabric sheet. |
| IsModifiable |
Identifies if the element is modifiable.
(Inherited from Element) |
| IsTransient |
Indicates whether an element is transient or permanent.
(Inherited from Element) |
| IsValidObject |
Specifies whether the .NET object represents a valid Revit entity.
(Inherited from Element) |
| LevelId |
The id of the level associated with the element.
(Inherited from Element) |
| Location | This property is used to find the physical location of an element within a project. (Inherited from Element) |
| Name | A human readable name for the Element. (Inherited from Element) |
| OwnerViewId |
The id of the view that owns the element.
(Inherited from Element) |
| Parameter[BuiltInParameter] | Retrieves a parameter from the element given a parameter id. (Inherited from Element) |
| Parameter[Definition] | Retrieves a parameter from the element based on its definition. (Inherited from Element) |
| Parameter[Guid] | Retrieves a parameter from the element given a GUID for a shared parameter. (Inherited from Element) |
| Parameters | Retrieves a set containing all of the parameters that are contained within the element. (Inherited from Element) |
| ParametersMap | Retrieves a map containing all of the parameters that are contained within the element. (Inherited from Element) |
| Pinned |
Identifies if the element has been pinned to prevent changes.
(Inherited from Element) |
| SketchId | The id of the Sketch element for this element. |
| UniqueId |
A stable unique identifier for an element within the document.
(Inherited from Element) |
| VersionGuid |
Get the element version Guid.
(Inherited from Element) |
| ViewSpecific |
Identifies if the element is owned by a view.
(Inherited from Element) |
| WorksetId |
Get Id of the Workset which owns the element.
(Inherited from Element) |