In the Design workspace, select Solid > Insert > Insert Component . The Insert Component dialog displays.

Learn how to insert Configurations into other design documents and create configurable assemblies in Fusion.

Learn how to use Insert T-Spline to insert TSM, TSS or FBX files as T-spline bodies into a design in Fusion.

Insert a sketch symbol in the Drawing workspace in Fusion.

On the Schematic Design toolbar, select Place > Insert Design Block . In the Select File dialog, navigate to and select the design block (*.dbl) to insert .

In the Design workspace, select Insert > Insert DXF . The Insert DXF dialog displays.

Insert Point lets you insert control points on edges at selected locations.

The Insert Fastener tool lets you insert a desired fastener to your design in Parametric Modeling mode in Fusion.

Use the Insert Mesh tool to insert an STL, OBJ, or 3MF file as a mesh body into the active component in a design in Fusion.

Insert a canvas On the toolbar, click Insert > Canvas .

Inserts text into the active drawing in the Drawing workspace in Fusion.

This video demonstrates inserting and using subassemblies. Key concepts and best practices include: Insert a subassembly into the active design Create a rigid group Create a revolute joint Length: 6:28

On the Design toolbar, select Place > Insert DXF/DWG . In the Open file dialog, browse to and select the DXF or DWG file to insert .

This is the recommended process to insert a design. On the Schematic Design toolbar, select Place > Insert Electronic Design .

On the Design workspace toolbar, click Solid > Insert > Insert Fastener . The Insert Fastener dialog displays.