The pressure increases 1,000 psi per step. Therefore, the applied pressure for Case 1 = 21.04 * 1,000 psi = 21,040 psi.

We expect this warning because the large pin has no X constraint applied, and the connecting rod has no X or Y constraint applied.

This option is found in the Unit and Value Display settings group of the Preferences dialog. Constraints Fixed Constraint , Z direction only (UZ): -Z circular end face of each rod Pin Constraint , Tangential direction only: All cylindrical faces of each rod Loads Structural Force, 6,000 pounds in Z direction: At each +Z end face of each rod.

The pin constraint enables us to constrain cylindrical faces in the radial, axial, and/or tangential directions depending on the behavior.

(Might take more than one Constraint ) Might help...... ...... no, there is no way to constrain a point to just the line segment.

(Might take more than one Constraint ) Might help...... ...... no, there is no way to constrain a point to just the line segment.

These tools are pivotal for scaling the industry beyond its current constraints , which require highly specialized manufacturing knowledge.

It's the first time that I'm having trouble with keeping the imported shape after adding constraints (2:46). These are the steps I've done: Inkscape Create paths Add a stroke Convert path to object export as SVG Video starts: Fusion360 New sketch Insert SVG Scale with factor 3.77953 Apply concentric constraints to two circles construction lines:horizontal and vertical Trying to constrain the "snake-like" shape: construction lines: Horizontal line, vertical line collinear constraint to horizontal construction line circles and "snake-like" shape collinear constraint to vertical construction line circles and "snake-like" shape "snake-like" shape distorts.

It's the first time that I'm having trouble with keeping the imported shape after adding constraints (2:46). These are the steps I've done: Inkscape Create paths Add a stroke Convert path to object export as SVG Video starts: Fusion360 New sketch Insert SVG Scale with factor 3.77953 Apply concentric constraints to two circles construction lines:horizontal and vertical Trying to constrain the "snake-like" shape: construction lines: Horizontal line, vertical line collinear constraint to horizontal construction line circles and "snake-like" shape collinear constraint to vertical construction line circles and "snake-like" shape "snake-like" shape distorts.

Soo odd Hi, @gordiehl schrieb: Ok so how do I fully constrain a circle? This way: 1. Position the center 2. create concident constraint line/center (view in My Videos) güntherRESEND A little more background...

Soo odd Hi, @gordiehl schrieb: Ok so how do I fully constrain a circle? This way: 1. Position the center 2. create concident constraint line/center (view in My Videos) güntherRESEND A little more background...

Be curious, especially using partially fixed constraints , the summary of the constraints should block the elements.

Even further, in collaboration with its partners CloudNC, Paperless Parts, 1000 Kelvin, and Toolpath Labs, Fusion is driving AI in manufacturing forward.

I have tried the other route as you have shown, by dimensioning the radius rather than the linear position and it works UNTIL you exeeded values above 1000 in for the the side and end arc radius(ie. as you approach a rectangular shape with r2in corners) As the side arcs approach straight lines the model won't accept the values (> 1000 in) and the tangent constraints in the sketch show up red (err).

Features" Conditions: 1000 instances > Realtime 1. Faces 2.