Taper Angle Specify angle to taper extrusion . Wall Thickness (Thin Extrude type only) Specify wall thickness for thin extrusion .

In the Design workspace, Form contextual environment, select Create > Extrude . The Extrude dialog displays.

Specify the Taper Angle to taper the extrusion . For the Thin Extrude type, specify the Wall Thickness.

Click Design > Surface > Create > Extrude . The Extrude dialog displays.

Use the Extrude Texture tool to add texture a mesh body from an image in Fusion.

Three sketch features selected for extrusion . The distance has not been entered in the figure, (left), Keys are extruded (right).

In the list of features that opens, click Extrude 4. Enter Base in the Distance box.

In this activity, you sketch a rectangle and extrude it to envelope the bottle, then cut the bottle from the extrusion to create a body that represents the volume of fluid that the bottle can contain.

One Side: Extrudes the full thickness value to one side of the sketch profile.

Steps Extrude the circular profile of the inner radius extrusion , and join the resulting solid to the swing arm.

One Side: Extrudes the full thickness value to one side of the sketch profile.

To set the distance for the left side extrusion , on the Extrude dialog, click Select next to the Object label within the Side 1 section.

Depth: Extrudes the web from the sketch profile to a specified depth.

Depth: Extrudes the web from the sketch profile to a specified depth.

In this example, we sketch a circle over the bolt hole, then use Extrude with the Intersect operation, to extrude a solid feature.