Determines the display characteristics for fan in, virtual parts, and connector views.
|
Access: |
With a nailboard selected, right-click in the browser or graphics window, and then select Nailboard Settings. The browser must be set to Cable & Harness to access the Nailboard Settings. |
Display tab
|
Snap Angle |
When snap is enabled through the context menu, Snap Angle sets the angle increments at which the segments, cable wires, or wires are forced to move when pivoting. Click to select an angle from the list. |
|
Fan In Display |
Sets the display options for all wire stubs that are in the fanned-in state. |
|
Virtual Parts |
Show looms sets whether all looms are shown or hidden. Show labels sets whether all labels are shown or hidden. |
|
Connector Views |
Offset sets the distance at which to place the base views of the selected connectors from the associated wire stubs. Orientation sets the orientation for the base view of the selected connectors. Click the arrow to select from the list of standard orientations. Scale sets the scale of the view relative to the harness assembly. Enter the scale in the box or click the arrow to select from a list of commonly used scales. Note: You can enter a scale that is not on the list. The new scale appears above a line in the list and is available until you close Autodesk Inventor. It is not added to the scale list from the Standard style.
Style sets the display style for the view. |
Display as Segment displays the wire using the appearance and diameter of the segment from which the wire emerges, and the length of the longest wire. 
Display as Longest Wire displays the wire using the appearance, diameter, and length of the longest wire. 
Displays hidden lines in the view. 
Removes hidden lines from the view. 
Displays shaded model in the view.