Specify Disc Cam Parameters

In the Cam region, enter the parameters for the cam:

1. In the Basic Radius field, enter 22 mm.
2. In the Cam Width field, enter 10 mm.
3. Click More Options in the lower right corner of the Design tab.
4. In the Follower Type region, select Swinging Arm.
5. In the Follower Shape region, select Cylinder.
6. In the Follower region (in the upper portion of the dialog box), enter 16 mm in the Roller Radius field.
7. In the Pivot Distance field, enter 60 mm.
8. In the Arm Length field, enter 60 mm.
9. In the Reaction Arm field, enter 60 mm.

Previous | Next