Access
Select Edit Bends from the context menu of the Bend node of a selected feature containing bends or click the Bend Edit glyph in the graphics window over the bend you wish to modify.
| Checkbox | Click the checkbox to enable the selection of an alternative Width Extents type from the Type drop-down selection list control. |
| Edge |
Resets an edge, that had previously been defined using: Width, Offset or From/To, to the entire edge. |
|
| Width | ||
| Centered | Radio control that allows the width to be centered on the selected edge. Selected by default. Not visible unless type is Width. | |
| Offset | Radio control that allows the specified width to be offset from a selected face (vertex, work plane or work point). Not visible unless type is Width. | |
| Width | Value entry field. Allows the width value to be specified. Not visible unless type is Width. | |
 |
Click this command to enable selection of the offset face. The command is disabled unless Offset radio control is selected. Not visible unless type is Width. | |
| Value entry field | Enter a value in this field to specify an offset from the selected face. Field is disabled unless the Offset radio control is selected. Not visible unless type is Width. | |
 |
Click this command to change the offset distance to the other side of the selected face. The command is disabled unless the Offset radio control is selected. Not visible unless type is Width. | |
| Offset | ||
 |
Click this command to enable selection of the first offset face (vertex, work plane or work point). Not visible unless type is Offset. | |
| Offset 1 | Value entry field. Allows the first offset to be specified. Not visible unless type is Offset. | |
 |
Click this command to enable selection of the second offset face (vertex, work plane or work point). Not visible unless type is Offset. | |
| Offset 2 | Value entry field. Allows the second offset to be specified. Not visible unless type is Offset. | |
| From To | ||
|
|
Click this command to enable selection of the from face (vertex, work plane or work point). Not visible unless type is From To. | |
|
|
Click this command to enable selection of the to face (vertex, work plane or work point). Not visible unless type is From To. | |
| Help | Opens this reference topic. |
| OK | Accepts the width extent input, modifies the bend and closes the Bend Edit dialog box. |