- In the browser, double-click Harness Assembly1.
-
On the ribbon, click
Cable and Harness tab
Create panel
Create Segment
.
- Pause the cursor over the harness segment to branch, and then click the segment work point shown as the branch start point.
- Change the offset to 0.470, and then select one point (2) between the segment and the LTP:1 connector.
- For the final point (3), change the offset to 0.270, and then select the face of the connector LTP:1 near pin 3.
- Right-click and select Finish to complete the branch with a shape like the one in the image.
Previous | Next
