Add text to a report

Add an introduction and conclusion to an existing report.

1. Click (Home tab > Reporting panel > Reports) to open the Reports tab.
2. Click (Reports tab > Reports panel > Edit Reports).

   If there is more than one report in this project, the Select A Project Item dialog appears. Select the tutorial report you want to work with and click OK.

   The Report Generation Wizard dialog is displayed.

3. Click Next until the Report Layout page appears.
4. Select the Pressure at end of fill result from the Report items list.
5. Click Text Block. The Edit Report Item Name dialog appears.
6. Type Introduction in the Name text box and click OK to add the new text block to the Report items list.
7. Select Introduction from the Report items list and click Edit. The Report Item Description dialog appears.
8. Enter the following information: The analysis results for the cellphone will be investigated. Attention will be paid to the Pressure at end of fill, Temperature at the flow front and any weld lines that might occur.
9. Click OK.
10. Add another text box titled Conclusion , position it at the end of the report and enter the following information: The part can be manufactured successfully. Weld lines will be evident in the area of the keypad. As the flow front temperature variations are small, these weld lines should be of minor concern.
11. Click OK and then Generate.

The report is regenerated and includes the new introduction and conclusion.