Define mold size

1. Click ( Geometry tab > Mold panel > Mold Size), to open the Mold Properties dialog.
   
   
2. Clear the Symmetric check box. The Offset coordinate fields are now editable.
3. Enter the following values in the Offset coordinate fields:

   Cell	Wall width (mm)
   -X	50
   +X	50
   -Y	50
   +Y	30

4. Click Apply.
5. Click Zoom Window on the Navigation bar, or right-click the mouse then select Fit to Window, to display the entire mold.
6. Rotate the ViewCube so that the Front view is facing you.
   
   
7. Enter 95 in the A Plate thickness text box.
8. Enter 30 in the B Plate thickness text box.
9. Click Apply.
10. Click Close to close the Mold Properties dialog.