Different results are generated for each analyses performed.
Topics in this section
Viewing results
For each analysis run, the results are listed in the Study Tasks pane. Each result can be viewed and examined and, where appropriate, animated.
Results Summary
A result summary showing the analysis inputs and the results of each phase of the analysis or analysis sequence is generated for each analysis that is performed.
Analysis log
An analysis log is generated every time an analysis is performed. It reports on any inputs used, any warnings or errors encountered, and provides a summary of results generated at the end of the filling and packing phases.
Results files Moldflow Results files contain a selection of results and analysis logs from one or two studies, and may also contain a Moldflow Criteria file.
Criteria files
A Moldflow Criteria file (*.criteria) contains a set of criteria that describe optimum values or ranges for input values and results.
Valid comparisons
Comparing several different studies of the same part, each with slightly different settings, will help you optimize the design and manufacturing process.
Thermoplastics Bi-injection Molding analysis results
Thermoplastics Bi-injection Molding analysis results are produced when the Thermoplastics Bi-injection Molding process is selected and an analysis sequence that includes Fill or Fill+Pack is selected.
Co-injection analysis results
This help topic specifies the results for a Co-injection analysis on a thermoplastic material.
Compression molding analysis results
This help topic specifies the results for an Injection-compression molding or compression molding analysis.
Cool analysis results
This topic specifies the results generated by a Cool analysis for a thermoplastic material. These results can be customized to specific requests for part troubleshooting.
Cooling Quality analysis results
This help topic specifies the results generated by a Cooling Quality analysis using a thermoplastic material.
Crystallization analysis results
Crystallization analysis results are produced when the option to perform crystallization analysis is selected in the analysis process settings.
Design Adviser results
This topic specifies the results generated for a Design Adviser analysis on a thermoplastic material.
Fiber Orientation analysis results
This help topic specifies the results for a Fill analysis or Fill+Pack analysis sequence on a thermoplastic material with fiber or filler content.
Flow results
This help topic specifies the results generated for analyses that include Fill, Fill+Pack, or Standalone Pack analysis sequences.
Reactive Molding analysis results
There are results available for a Reaction Injection Molding (RIM) analysis, and a Resin Transfer Molding (RTM) or a Structural Reaction Injection Molding (SRIM) analysis, using a thermoset material.
Runner adviser analysis results
This topic explains the results generated by a Runner adviser analysis on a thermoplastic material.
Runner Balance analysis results
This topic explains the results generated for a Runner balance analysis on a thermoplastic material.
Shrink analysis results
This help topic specifies the results for a Shrink analysis on a thermoplastic material.
Sink Mark analysis results
This topic specifies the results generated for a Sink Mark analysis on a thermoplastic material without fiber or filler content.
Stress analysis results
This help topic specifies the results for a Stress analysis on a thermoplastic material.