Underfill Encapsulation analysis results

This help topic provides an overview of the results generated by an Underfill Encapsulation analysis.

Text based results

The following table lists the text results generated for an Underfill Encapsulation analysis.

Results
Underfill encapsulation analysis log
Results Summary

Graphical results

The following table lists the filling and curing graphical results generated for an Underfill Encapsulation analysis, and indicates whether each result is supported for the following analysis technologies:

• Midplane
• Dual Domain
• 3D

For more information about a result, including how to interpret the display, click on the result name.

Flow (Fill+Pack / filling and curing phase) results	Analysis technology
Fill time result
Clamp force result
Pressure result
Shear rate bulk result
Shear stress at wall result
Bulk temperature nodal result
Cured layer fraction result
Air traps result
Pressure at injection location
Pressure at V/P switchover
Temperature at flow front result
Bulk conversion result
Weld lines result
Weld and meld lines
Conversion at node result
Density
Extension rate
Polymer filled region
Shear rate result (3D)
Shear rate maximum result
Temperature result (3D)
Unfilled cavity 1
Velocity result (3D)
Viscosity result