Line Loads with Host

    Only the analytical model is available to be selected for placement of hosted loads. The physical geometry of components will not accept the load.

  1. Click Analyze tabLoads panel Loads.
  2. Click Modify | Place Loads tabLoads panel Hosted Line Load.
  3. On the Properties palette, select a value for Load Case. For information about Load Case, see Adding a Load Case or Load Nature.
  4. For the Orient to parameter, select Project or Work Plane.
  5. Select a component along which you wish to place the load instance.
    Note: For an example of placing line loads on a sloped frame, see Placing Line Loads on a Sloped Frame.