Use this dialog box to select chamfer distances and chamfer angles, to specify whether to insert a chamfer with dimensions, and whether to trim the selected edges to the chamfer line endpoints.
|
First Chamfer Length Displays a list of values that you can use to specify the distance of the first chamfer from the selected edge. The |
|
|
Second Chamfer Length Displays a list of common values that you can use to specify the distance of the second chamfer from the selected edge. The |
|
|
Chamfer Angle Displays a list of available angle values that you can use to specify the distance of the second chamfer from the selected edge. The |
|
|
Options |
|
|
Trim Geometry Sets the AMCHAM2D command to trim the selected edges to the chamfer line endpoints |
|
|
Insert dimension on chamfer Inserts a dimension when you create the chamfer. |
|
|
Chamfer dimension style Shows an image of the currently selected chamfer dimension representation. Click the drop-down arrow to select a different chamfer dimension representation. |
|
|
Configure Displays the Chamfer List Configuration dialog box that enables you to customize the list of chamfer sizes. |
|
button reverts to the drawing, where you can specify a value for the first chamfer distance. This value is displayed in the Input field.