Define how cant is represented in the Preview panel. Cant can be previewed in Roadway Mode but not in Layout Mode.
Note: You can use the
Input/Output Parameters tab to add parameters that are brought into
Autodesk Subassembly Composer when the subassembly is imported.
Note: Select the
ApplyAOR check box in the Properties panel for links to which you want to apply cant.
For more information, see About Defining Cant for a Subassembly.
| Cant Parameter |
Specifies the cant pivot type, the points that represent the left and right rails, and the delta elevations to apply: - CantPivotType: Specifies whether the pivot type used in the preview is CenterLine, LeftRail, or RightRail.
- LeftRail: Specifies the point to use as the left rail pivot point in the preview.
- LeftRailDeltaElevation: Specifies the delta elevation to use for the left rail in the preview.
- RightRail: Specifies the point to use as the right rail pivot point in the preview.
- RightRailDeltaElevation: Specifies the delta elevation to use for the right rail in the preview.
Note:
- When the CantPivotType is set to CenterLine, the LeftRailDeltaElevation and RightRailDeltaElevation parameters should have opposite values.
- When the CantPivotType is set to LeftRail, the LeftRailDeltaElevation should be 0.
- When the CantPivotType is set to RightRail, the RightRailDeltaElevation should be 0.
|
| Preview Value |
Specifies the value used when the parameter is drawn in the Preview panel. |