To create and edit bridge styles

Bridge Design for InfraWorks 360 provides a catalog of bridge styles, or you can create and edit new ones. Bridge styles are distinct from bridge deck styles (which are road styles). Bridge styles apply settings to bridge components such as the bridge deck, abutment, piers and bearings.

To create or edit a deck style

Bridge deck styles are not bridge styles, they are road styles with 3D decorations such as barriers, medians, fences, and handrails.

• Create and edit bridge deck styles in the Street/Bridge Deck catalog on the Road tab of the Style Palette.

  See To edit road styles for more information.

• Select a bridge and use the Bridge asset card to change the deck style for only the section of the road containing the selected bridge.

  See: To change the deck style for more information.

To create or edit a bridge style

1. Click .
2. Scroll down on the left side of the Style Palette, and click the Bridge tab
3. Select the desired Bridge style catalog from the drop-down list.
4. Do either:
   • Click in the Style Editing section of the Style Palette to create a new style in the selected catalog.
   • Select an existing style in the catalog and click to edit that style.
     Note: It is good practice to copy an existing style instead of changing the original version. Click to duplicate an existing style before editing it.
5. Refer to the table below to specify desired settings.
6. Click OK in the Configure Bridge Style box to apply the settings to your new style.

Bridge Style Settings	Customize
Bridge Settings	Click the Browse button to change the Material Group.
Deck Settings	Specify desired settings such as thickness or clearance. The deck thickness property represents the depth of concrete along the length of the bridge.
Girder Group Settings	General: specify desired settings such as type, number of girders, depths, start and end lateral spacing, start and end gaps, and material. Model: specify desired settings such as top and bottom flange height and width, as well as web width.
Abutment Settings	Specify desired settings such as depth and offsets of the abutments.
Pier Settings	General: specify desired settings such as column width and pier spacing. Cap: specify desired settings such as cap height and offset. Foundation: specify desired settings such as foundation type, depth, and height above ground. Pile Foundation: specify desired settings such as diameter, wall thickness, and batter.
Bearing Settings	General: specify desired settings such as bearing height, spacing and offset. Masonry Plate: specify desired settings such as masonry plate height and depth. Sole Plate: specify desired settings such as sole plate height and depth.