Right Angle Course Elements

Element	Description
Point 1	The base line for calculations (offset = 0.00). Use to select another base line.
Point 2	Add definition rows for the offset lines. Specify the distance to the base line by clicking.
Easting, Northing	Coordinates of existing points. Use to select a point in the drawing. Use to delete the coordinates of a point.
Distance	The measured value.
Calculated Distance Delta	The distance calculated from existing coordinates. The measured sections are adjusted to the existing points. Delta shows the difference between measured and calculated values, so you can decide, whether the object can be described with a right angle course.
Point 3 Point …	The right angle course can consist of an arbitrary number of measured sections and existing points. For sections, only the distance column is filled out.
Add Sections	Click Add Sections to enter the measured values. The focus changes to the map and you can specify the location with a click or enter the value.