#include <bitmap.h>

Class Description

Information about an image file or in-memory bitmap, including settings for loading/saving, gamma, etc.

See also: Class Bitmap, Working with Bitmaps, Bitmap Error (result) Codes.

Description:: This class describes the properties of a bitmap such as its path name or device name, width, height, gamma, number of frames, etc. Methods are available to set and retrieve these properties. All methods are implemented by the system unless noted otherwise.

: In general, BitmapInfo should be used and saved for user-defined files rather than filenames, because the BitmapInfo encodes information beyond the filename, including file-format specific settings (e.g. compression on .JPG files) and so on.

: The file dialog functions (such as BitmapManager::SelectFileInput() or BitmapManager::SelectFileOutput()) can be seen as "BitmapInfo editors", since they allow the user to edit its content.

Inheritance diagram for BitmapInfo:

Public Member Functions
BMMExport	BitmapInfo ()

BMMExport	BitmapInfo (const MCHAR *n)

BMMExport	BitmapInfo (const MaxSDK::AssetManagement::AssetUser &asset)

BMMExport	BitmapInfo (const BitmapInfo &bi)

BMMExport	~BitmapInfo ()

BMMExport MaxSDK::Util::Path	GetPathEx () const
	Returns the currently set path of the image file. More...

BMMExport void	CopyImageInfo (BitmapInfo *from)

BMMExport void	SetPath (const MaxSDK::Util::Path &path)
	Set the path to the image file. More...

BMMExport const MaxSDK::AssetManagement::AssetUser &	GetAsset () const
	returns this bitmap's asset More...

BMMExport void	SetAsset (const MaxSDK::AssetManagement::AssetUser &assetUser)
	sets this bitmap's asset More...

BMMExport void *	GetPiData ()
	Returns the plugin data stored on the BitmapInfo. More...

BMMExport void	SetPiData (void *ptr)
	Sets the plugin data stored on the BitmapInfo. More...

BMMExport DWORD	GetPiDataSize ()
	Returns the size of the plugin data stored on the BitmapInfo. More...

BMMExport void	SetPiDataSize (DWORD s)
	Sets the reported size of the plugin data stored on the BitmapInfo. More...

BMMExport void	ResetPiData ()
	Resets the plugin data stored on the BitmapInfo. More...

BMMExport BOOL	AllocPiData (DWORD size)
	Allocates the plugin data memory and set the plugin data size. More...

BMMExport BitmapInfo *	GetProxySubject (BOOL create=FALSE)
	Returns the subject info of the proxy. When create is TRUE, the subject info will be allocated if it was null. More...

BMMExport void	ResetProxySubject ()
	Deletes the subject info and sets it to null. More...

BMMExport BOOL	AllocProxySubject ()
	Creates the subject info. More...

BMMExport void *	CreateFmtSpecBlock (void)

BMMExport void	Copy (const BitmapInfo *from, BOOL copyProxySubject)
	Assignment function. The data members of the specified BitmapInfo are copied to this BitmapInfo, with option to also copy the proxySubject info. More...

BMMExport void	Copy (const BitmapInfo *from)

BMMExport IOResult	Save (ISave *isave)

BMMExport IOResult	Load (ILoad *iload)

BMMExport void	EnumAuxFiles (AssetEnumCallback &assetEnum, DWORD vflags)

BMMExport BOOL	Validate ()

BMMExport HWND	GetUpdateWindow ()

BMMExport void	SetUpdateWindow (HWND hwnd)

BMMExport DWORD	GetGChannels ()

BMMExport DWORD	GetDeviceFlags ()

BMMExport BOOL	FixDeviceName ()
	Sets the appropriate device name, as derived from the filename. More...

Flag Access
BMMExport DWORD	Flags ()

BMMExport DWORD	SetFlags (DWORD f)

BMMExport DWORD	ResetFlags (DWORD f)

BMMExport BOOL	TestFlags (DWORD f)

Get/Set Bitmap Properties
BMMExport WORD	Width ()

BMMExport WORD	Height ()

BMMExport float	Gamma ()

BMMExport float	Aspect ()

BMMExport int	Type ()

BMMExport WORD	SetWidth (WORD s)

BMMExport WORD	SetHeight (WORD u)

BMMExport float	SetGamma (float c)

BMMExport float	SetAspect (float k)

BMMExport int	SetType (int s)

Frame Ranges
BMMExport int	FirstFrame ()

BMMExport int	LastFrame ()

BMMExport int	NumberFrames ()

BMMExport int	CurrentFrame ()

BMMExport WORD	SequenceOutBound ()

BMMExport int	SetFirstFrame (int m)

BMMExport int	SetLastFrame (int s)

BMMExport int	SetCurrentFrame (int v)

BMMExport WORD	SetSequenceOutBound (WORD c)

Name/Device Access
BMMExport const MCHAR *	Name () const
	Returns the currently set path of the image file. More...

BMMExport const MCHAR *	Filename ()

BMMExport const MCHAR *	Device ()

BMMExport BOOL	CompareName (BitmapInfo *bi)

BMMExport const MCHAR *	SetName (const MCHAR *n)
	Set the path to the image file. More...

BMMExport const MCHAR *	SetDevice (const MCHAR *d)
	Sets the device name. More...

Custom Input Processing
BMMExport WORD	CustWidth ()

BMMExport WORD	CustHeight ()

BMMExport void	SetCustWidth (WORD w)

BMMExport void	SetCustHeight (WORD h)

BMMExport int	StartFrame ()

BMMExport int	EndFrame ()

BMMExport void	SetStartFrame (int s)

BMMExport void	SetEndFrame (int e)

BMMExport void	SetCustomX (int x)

BMMExport void	SetCustomY (int y)

BMMExport int	GetCustomX ()

BMMExport int	GetCustomY ()

BMMExport void	SetCustomGamma (float g)

BMMExport float	GetCustomGamma ()

BMMExport float	GetEffectiveGamma ()

BMMExport void	SetCustomStep (int s)

BMMExport int	GetCustomStep ()

BMMExport void	SetPresetAlignment (int p)

BMMExport int	GetPresetAlignment ()

Custom Input Flags
BMMExport DWORD	GetCustomFlags ()

BMMExport void	SetCustomFlag (DWORD f)

BMMExport void	ResetCustomFlag (DWORD f)

BMMExport BOOL	TestCustomFlags (DWORD f)

Operators
BMMExport BitmapInfo &	operator= (const BitmapInfo &from)

Additional Inherited Members
Static Public Member Functions inherited from MaxHeapOperators
static UtilExport void *	operator new (size_t size)
	Standard new operator used to allocate objects If there is insufficient memory, an exception will be thrown. More...

static UtilExport void *	operator new (size_t size, const std::nothrow_t &e)
	Standard new operator used to allocate objects if there is insufficient memory, NULL will be returned. More...

static UtilExport void *	operator new (size_t size, const char *filename, int line)
	New operator used to allocate objects that takes the filename and line number where the new was called If there is insufficient memory, an exception will be thrown. More...

static UtilExport void *	operator new (size_t size, int block_type, const char *filename, int line)
	New operator used to allocate objects that takes the type of memory, filename and line number where the new was called If there is insufficient memory, an exception will be thrown. More...

static UtilExport void *	operator new (size_t size, const std::nothrow_t &e, const char *filename, int line)
	New operator used to allocate objects that takes the filename and line number where the new was called If there is insufficient memory, NULL will be returned. More...

static UtilExport void *	operator new (size_t size, unsigned long flags)
	New operator used to allocate objects that takes extra flags to specify special operations If there is insufficient memory, an exception will be thrown. More...

static UtilExport void *	operator new (size_t size, const std::nothrow_t &e, unsigned long flags)
	New operator used to allocate objects that takes extra flags to specify special operations If there is insufficient memory, NULL will be returned. More...

static UtilExport void *	operator new[] (size_t size)
	New operator used to allocate arrays of objects If there is insufficient memory, an exception will be thrown. More...

static UtilExport void *	operator new[] (size_t size, const std::nothrow_t &e)
	New operator used to allocate arrays of objects If there is insufficient memory, NULL will be returned. More...

static UtilExport void *	operator new[] (size_t size, const char *filename, int line)
	New operator used to allocate arrays of objects If there is insufficient memory, an exception will be thrown. More...

static UtilExport void *	operator new[] (size_t size, int block_type, const char *filename, int line)
	New operator used to allocate arrays of objects. More...

static UtilExport void *	operator new[] (size_t size, const std::nothrow_t &e, const char *filename, int line)
	New operator used to allocate arrays of objects If there is insufficient memory, NULL will be returned. More...

static UtilExport void *	operator new[] (size_t size, unsigned long flags)
	New operator used to allocate arrays of objects If there is insufficient memory, an exception will be thrown. More...

static UtilExport void *	operator new[] (size_t size, const std::nothrow_t &e, unsigned long flags)
	New operator used to allocate arrays of objects If there is insufficient memory, NULL will be returned. More...

static UtilExport void	operator delete (void *ptr)
	Standard delete operator used to deallocate an object If the pointer is invalid, an exception will be thrown. More...

static UtilExport void	operator delete (void *ptr, const std::nothrow_t &e)
	Standard delete operator used to deallocate an object If the pointer is invalid, nothing will happen. More...

static UtilExport void	operator delete (void ptr, const char filename, int line)
	Delete operator used to deallocate an object that takes the filename and line number where the delete was called If the pointer is invalid, an exception will be thrown. More...

static UtilExport void	operator delete (void ptr, int block_type, const char filename, int line)
	Delete operator used to deallocate an object that takes the type of memory, filename and line number where the delete was called If the pointer is invalid, an exception will be thrown. More...

static UtilExport void	operator delete (void ptr, const std::nothrow_t &e, const char filename, int line)
	Delete operator used to deallocate an object that takes the filename and line number where the delete was called If the pointer is invalid, nothing will happen. More...

static UtilExport void	operator delete (void *ptr, unsigned long flags)
	Delete operator used to deallocate an object that takes extra flags to specify special operations If the pointer is invalid, an exception will be thrown. More...

static UtilExport void	operator delete (void *ptr, const std::nothrow_t &e, unsigned long flags)
	Delete operator used to deallocate an object that takes extra flags to specify special operations If the pointer is invalid, nothing will happen. More...

static UtilExport void	operator delete[] (void *ptr)
	Standard delete operator used to deallocate an array of objects If the pointer is invalid, an exception will be thrown. More...

static UtilExport void	operator delete[] (void *ptr, const std::nothrow_t &e)
	Standard delete operator used to deallocate an array of objects If the pointer is invalid, nothing will happen. More...

static UtilExport void	operator delete[] (void ptr, const char filename, int line)
	Delete operator used to deallocate an array of objects that takes the filename and line number where the delete was called If the pointer is invalid, an exception will be thrown. More...

static UtilExport void	operator delete[] (void ptr, int block_type, const char filename, int line)
	Delete operator used to deallocate an array of objects that takes the type of memory, filename and line number where the delete was called If the pointer is invalid, an exception will be thrown. More...

static UtilExport void	operator delete[] (void ptr, const std::nothrow_t &e, const char filename, int line)
	Delete operator used to deallocate an array of objects that takes the filename and line number where the delete was called If the pointer is invalid, nothing will happen. More...

static UtilExport void	operator delete[] (void *ptr, unsigned long flags)
	Delete operator used to deallocate an array of objects that takes extra flags to specify special operations If the pointer is invalid, an exception will be thrown. More...

static UtilExport void	operator delete[] (void *ptr, const std::nothrow_t &e, unsigned long flags)
	Delete operator used to deallocate an array of objects that takes extra flags to specify special operations If the pointer is invalid, an exception will be thrown. More...

static UtilExport void *	operator new (size_t size, void *placement_ptr)
	Placement new operator. More...

static UtilExport void	operator delete (void ptr, void placement_ptr)
	Placement delete operator. More...

Constructor & Destructor Documentation

BMMExport BitmapInfo ( )

Remarks: Constructor. The following defaults are set by this constructor.

The width = 640;

The height = 480;

The custom width = 320;

The custom height = 200;

The custom flags = BMM_CUSTOM_RESFIT | BMM_CUSTOM_FILEGAMMA;

The custom gamma = 1.0f;

The frame number = 0;

The aspect ratio = 1.0f;

The gamma setting = 1.0f;

The name and device name are set to NULL.

The looping flag = BMM_SEQ_WRAP;

BMMExport BitmapInfo ( const MCHAR * n )

Remarks: Constructor. The defaults are set as above excepting the bitmap name is set.

Parameters:: MCHAR *n

The bitmap file name is set.

BMMExport BitmapInfo ( const MaxSDK::AssetManagement::AssetUser & asset )

Remarks: Constructor. The defaults are set as above excepting the bitmap asset is set.

Parameters:: AssetUser &asset

The bitmap file asset is set.

BMMExport BitmapInfo ( const BitmapInfo & bi )

Remarks: This method is available in release 3.0 and later only.

Copy Constructor.

Parameters:: const BitmapInfo &bi

The BitmapInfo to copy from.

BMMExport ~BitmapInfo ( )

Member Function Documentation

BMMExport DWORD Flags ( )

inline

Remarks: Returns the flags of this BitmapInfo. See Bitmap Flags.

902 { return (flags); }

BMMExport DWORD SetFlags ( DWORD f )

inline

Remarks: Sets the flags for this BitmapInfo. These are bitwise OR-ed into the current flags.

Parameters:: DWORD f

The flag bits to set. See Bitmap Flags.

Returns: The revised flags are returned.

909 { flags |= f; return (flags); }

BMMExport DWORD ResetFlags ( DWORD f )

inline

910 { flags &= ~f; return (flags); }

BMMExport BOOL TestFlags ( DWORD f )

inline

Remarks: Determines if a set of flag bits are set.

Parameters:: DWORD f

The flag bits to test. See Bitmap Flags.

Returns: TRUE if the bits are set; otherwise FALSE.

916 { return (flags & f); }

BMMExport WORD Width ( )

inline

Remarks: Returns the width (horizontal dimension) property of this BitmapInfo.

925 { return (width); }

BMMExport WORD Height ( )

inline

Remarks: Returns the height (vertical dimension) setting of this BitmapInfo.

928 { return (height); }

BMMExport float Gamma ( )

inline

Remarks: Returns the gamma setting property of this BitmapInfo.

930 { return (gamma); }

BMMExport float Aspect ( )

inline

Remarks: Returns the aspect ratio property of this BitmapInfo.

932 { return (aspect);}

BMMExport int Type ( )

inline

Remarks: Returns the type property of this BitmapInfo. See Bitmap Types.

934 { return (type); }

BMMExport WORD SetWidth ( WORD s )

inline

Remarks: Sets the width (horizontal dimension) property of this BitmapInfo.

Parameters:: WORD w

Specifies the width setting in pixels.

Returns: The old (previously set) width of the bitmap.

941 { WORD o = width; width = s; return (o);}

BMMExport WORD SetHeight ( WORD u )

inline

Remarks: Sets the height (vertical dimension) property of this BitmapInfo.

Parameters:: WORD h

Specifies the height setting in pixels.

Returns: The old (previous) height setting.

948 { WORD o = height; height = u; return (o);}

BMMExport float SetGamma ( float c )

inline

Remarks: Sets the gamma property of this BitmapInfo to the value passed.

Parameters:: float g

Specifies the gamma setting.

Returns: The old (previous) gamma setting.

955 { float o = gamma; gamma = c; return (o);}

BMMExport float SetAspect ( float k )

inline

Remarks: Set the aspect ratio property of this BitmapInfo to the specified value.

Parameters:: float a

Specifies the aspect ratio setting.

Returns: The old (previous) aspect ratio of the bitmap.

962 { float o = aspect; aspect = k; return (o);}

BMMExport int SetType ( int s )

inline

Remarks: Sets the type property of this BitmapInfo to the specified value.

Parameters:: int t

Specifies the type of bitmap. See Bitmap Types.

Returns: The old (previous) type setting.

969 { int o = type; type = s; return (o);}

BMMExport int FirstFrame ( )

inline

Remarks: Returns the first frame property of this BitmapInfo. Note that for a multi-frame bitmap some sequences may start with something other than 0.

977 { return (fstart); }

BMMExport int LastFrame ( )

inline

Remarks: Returns the last frame property of this BitmapInfo.

979 { return (fend); }

BMMExport int NumberFrames ( )

inline

Remarks: Returns the total number of frames setting of this BitmapInfo.

982 { return (fend - fstart + 1); }

BMMExport int CurrentFrame ( )

inline

Remarks: Returns the current frame setting of this BitmapInfo.

984 { return (fnumber); }

BMMExport WORD SequenceOutBound ( )

inline

Remarks: When multi-frame BitmapIO loaders are reading a sequence of frames, this method is called to indicate what to do when reading beyond the end of available frames. The defaults is BMM_SEQ_WRAP.

Returns: One of the following values:

BMM_SEQ_WRAP

Wraps around back to start point.

BMM_SEQ_ERROR

Generates an error if reading goes beyond the end.

BMM_SEQ_PINGPONG

This causes the sequence to turn around and goes the other direction, back and forth.

BMM_SEQ_HOLD

When the last frame is reached it is held and used over and over.

999 { return (loopflag); }

BMMExport int SetFirstFrame ( int m )

inline

Remarks: Sets the first frame property of this BitmapInfo.

Parameters:: int f

Specifies the first frame setting.

Returns: The old (previous) first frame setting.

1006 { int o = fstart; fstart = m; return (o);}

BMMExport int SetLastFrame ( int s )

inline

Remarks: Sets the last frame property of this BitmapInfo.

Parameters:: int f

Specifies the last frame.

Returns: The old (previous) frame setting.

1012 { int o = fend; fend = s; return (o);}

BMMExport int SetCurrentFrame ( int v )

inline

Remarks: Sets the current frame setting of this BitmapInfo.

Parameters:: int v

Specifies the current frame.

Returns: The old (previous) current frame setting.

1018 { int o = fnumber; fnumber = v; return (o);}

BMMExport WORD SetSequenceOutBound ( WORD c )

inline

Remarks: Sets the sequence out of bounds property of this BitmapInfo. When reading a sequence of frames, this specifies what to do when reading beyond the end of available frames.

Parameters:: WORD s

One of the following values:

BMM_SEQ_WRAP

Wraps around back to start point.

BMM_SEQ_ERROR

Generates an error if reading goes beyond the end.

BMM_SEQ_PINGPONG

This causes the sequence to turn around and goes the other direction, back and forth.

BMM_SEQ_HOLD

When the last frame is reached it is held and used over and over.

Returns: The old (previous) value that was set.

1035 { WORD o = loopflag; loopflag = c; return (o);}

BMMExport const MCHAR* Name ( ) const

Returns the currently set path of the image file.

Returns

The currently set path of the image file.

\remarks Returns the name property of this BitmapInfo. This is the

full path name. See MCHAR *Filename() for just the file name.

BMMExport const MCHAR* Filename ( )

Remarks: Returns just the file name of this BitmapInfo (not the entire path name).

BMMExport const MCHAR* Device ( )

inline

Remarks: Returns the device name responsible for producing this image. For file types, this is just informative. For non-file types (devices) this is the way this image is identified. Therefore, it is important to save both name and device in order to properly identify an image.

1066 { return (const MCHAR *)device; }

MCHAR

#define MCHAR

MBCS/Unicode helper defines std::wofstream doesn't mix well with Unicode.

Definition: strbasic.h:42

BMMExport BOOL CompareName ( BitmapInfo * bi )

Remarks: This method will compare names taking in consideration both file names and device names. As devices don't have a file name, this method will first determine what type of image this is, and then perform a proper comparison.

Parameters:: BitmapInfo *bi

The other BitmapInfo with which to compare names.

Returns: TRUE if the BitmapInfos have the same name and device name; otherwise FALSE.

BMMExport const MCHAR* SetName ( const MCHAR * n )

Set the path to the image file.

This is a convenience method and calls SetPath under the hood.

Parameters

n

New path for the bitmap.

\remarks Sets the name property of this BitmapInfo. When writing

n should have a fully qualified filename. When reading, it only matters if the image is not in the MAP path. Note that a "feature" of the MAP path system is that if an image with same name is found more than once (in different paths), only the first one is seen.

Note: If loading an image from a device, make sure the name is empty (bi.SetName(_M(""));). This is automatic if you use BitmapManager::SelectDeviceInput(). If you just create a BitmapInfo instance and set the device name by hand (bi.SetDevice()), this is also automatic as both name and device names are by default set to NULL (""). This is only a concern if you reuse a BitmapInfo class previously used for image files.

Parameters:: const MCHAR *n

Specifies the name of the bitmap.

Returns: The old (previous) name that was set.

BMMExport const MCHAR* SetDevice ( const MCHAR * d )

Sets the device name.

Remarks: This copies the supplied string into the member variable device. The string corresponds with the long description of a BitmapIO plugin: BitmapIO::LongDesc(). However it is not necessary to call this as the system will do it automatically when Bitmap::OpenOutput is called. Or as alternative, it can properly be set in a localized environment by calling BitmapInfo::FixDeviceName().

Parameters

d	- The name to set.

Returns: The device name that was set.

BMMExport MaxSDK::Util::Path GetPathEx ( ) const

Returns the currently set path of the image file.

Returns: The currently set path of the image file.

BMMExport void CopyImageInfo ( BitmapInfo * from )

Remarks: Copies the image information of the from BitmapInfo to this bitmap. Only the name, device and image characteristics are copied. User info, such as Custom Width, etc. is not copied.

The following properties of the from BitmapInfo are copied:

from->Name(),from->Device(),from->Width(), from->Height(), from->Aspect(), from->Gamma(),from->Type(), from->Flags(), from->FirstFrame(), from->LastFrame(), from->CurrentFrame(), from->GetCustomFlags()

Parameters:: BitmapInfo *from

The bitmap whose information will be copied.

BMMExport void SetPath ( const MaxSDK::Util::Path & path )

Set the path to the image file.

Parameters

path	New path for the bitmap.

BMMExport const MaxSDK::AssetManagement::AssetUser& GetAsset ( ) const

returns this bitmap's asset

BMMExport void SetAsset ( const MaxSDK::AssetManagement::AssetUser & assetUser )

sets this bitmap's asset

param[in] assetUser the new asset

BMMExport WORD CustWidth ( )

inline

Remarks: Returns the custom width setting of this BitmapInfo.

1163 { return (cwidth); }

BMMExport WORD CustHeight ( )

inline

Remarks: Returns the custom height setting of this BitmapInfo.

1165 { return (cheight); }

BMMExport void SetCustWidth ( WORD w )

inline

Remarks: Sets the custom width setting for this BitmapInfo.

Parameters:: WORD w

The new custom width setting.

1170 { cwidth = w; }

BMMExport void SetCustHeight ( WORD h )

inline

Remarks: Sets the custom height property of this BitmapInfo.

Parameters:: WORD h

The new custom height setting.

1175 { cheight = h; }

BMMExport int StartFrame ( )

inline

Remarks: Returns the custom start frame property of this BitmapInfo.

1178 { return (start); }

BMMExport int EndFrame ( )

inline

Remarks: Returns the custom end frame setting of this BitmapInfo.

1181 { return (end); }

BMMExport void SetStartFrame ( int s )

inline

Remarks: Sets the custom start frame property to the specified value.

Parameters:: int s

Specifies the start frame setting.

1187 { start = s; }

BMMExport void SetEndFrame ( int e )

inline

Remarks: Sets the custom end frame property of this BitmapInfo.

Parameters:: int e

The new end frame setting.

1192 { end = e; }

BMMExport void SetCustomX ( int x )

inline

Remarks: Specifies the optional X coordinate (offset) property of this BitmapInfo. This specifies where to place the image if the image being copied from one Bitmap to another is smaller.

Parameters:: int x

Specifies the custom X offset.

1199 { custxpos = x; }

x

controller mat max min numsubs x z controller keys x z controller keys x

Definition: generics.inl:211

BMMExport void SetCustomY ( int y )

inline

Remarks: Sets the optional Y coordinate (offset) property of this BitmapInfo. This specifies where to place the image if the image being copied from one Bitmap to another is smaller.

Parameters:: int y

Specifies the custom y offset.

1206 { custypos = y; }

BMMExport int GetCustomX ( )

inline

Remarks: Returns the custom x offset setting of this BitmapInfo.

1208 { return custxpos; }

BMMExport int GetCustomY ( )

inline

Remarks: Returns the custom Y offset setting of this BitmapInfo.

1210 { return custypos; }

BMMExport void SetCustomGamma ( float g )

inline

Remarks: Sets a custom gamma setting of this BitmapInfo to the specified value.

Parameters:: float g

Specifies the custom gamma setting.

1216 { custgamma = g; }

BMMExport float GetCustomGamma ( )

inline

Remarks: Returns the custom gamma setting of this BitmapInfo.

1218 { return custgamma; }

BMMExport float GetEffectiveGamma ( )

Remarks: Returns the bitmap's currently used input gamma value. This is taken from either the image file's gamma, the system defaults, or the user override, according to the custom flags.

BMMExport void SetCustomStep ( int s )

inline

Remarks: Sets the custom frame increment setting of this BitmapInfo.

Parameters:: int s

Specifies the frame increment to use.

1227 { step = s; }

BMMExport int GetCustomStep ( )

inline

Remarks: Returns the custom frame step setting of this BitmapInfo.

1230 { return step; }

BMMExport void SetPresetAlignment ( int p )

inline

Remarks: Establishes the optional alignment setting of this BitmapInfo. This specifies where to place the image if the image being copied from one Bitmap to another is smaller.

Parameters:: int p

Specifies one of the following nine values that define the position of the bitmap:

See Bitmap Alignment Positions.

1239 { preset_al = p; }

BMMExport int GetPresetAlignment ( )

inline

Remarks: Returns the optional alignment setting of this BitmapInfo. This indicates where to place the image if the image being copied from one Bitmap to another is smaller.

Returns: See Bitmap Alignment Positions.

1244 { return preset_al; }

BMMExport DWORD GetCustomFlags ( )

inline

Remarks: Retrieves the custom flags setting of this BitmapInfo . See Custom Bitmap Flags.

1253 { return (customflags); }

BMMExport void SetCustomFlag ( DWORD f )

inline

Remarks: Sets the custom flag(s) for this BitmapInfo.

Parameters:: DWORD f

Specifies the custom flags. See Custom Bitmap Flags.

1258 { customflags |= f; }

BMMExport void ResetCustomFlag ( DWORD f )

inline

Remarks: Clears the specified flag(s) of this BitmapInfo. See Custom Bitmap Flags.

Parameters:: DWORD f

Specifies the flag bits to reset.

1263 { customflags &= ~f; }

BMMExport BOOL TestCustomFlags ( DWORD f )

inline

Remarks: Tests the custom flags of this BitmapInfo. See Custom Bitmap Flags.

Parameters:: DWORD f

The flag bits to test.

Returns: Returns TRUE if the specified flags were set; otherwise FALSE.

1270 { return (customflags & f); }

BMMExport void* GetPiData ( )

inline

Returns the plugin data stored on the BitmapInfo.

The plugin data is set by BitmapIO class responsible for producing this image. The BitmapIO class stores its image specific data in the plugin data. For example, the avi BitmapIO class stores the compressor name, quality, and keyframe in the plugin data. The BitmapInfo owns the memory associated with the plugin data and will free the memory when deleted.

Returns: Pointer to the plugin data.

1282 { return pidata; }

BMMExport void SetPiData ( void * ptr )

inline

Sets the plugin data stored on the BitmapInfo.

This method is not normally called, rather a BitmapIO instance will call AllocPiData(), which will allocate the plugin data memory and set the plugin data size. The BitmapIO will then acquire the pointer to the plugin data memory via GetPiData()

Parameters

[in] ptr Pointer to the plugin data.

1289 { pidata = ptr; }

BMMExport DWORD GetPiDataSize ( )

inline

Returns the size of the plugin data stored on the BitmapInfo.

Returns: Size of the plugin data.

1294 { return pisize; }

BMMExport void SetPiDataSize ( DWORD s )

inline

Sets the reported size of the plugin data stored on the BitmapInfo.

This method is not normally called, rather a BitmapIO instance will call AllocPiData(), which will allocate the plugin data memory and set the plugin data size. The BitmapIO will then acquire the pointer to the plugin data memory via GetPiData()

Parameters

[in] s Reported size of the plugin data.

1301 { pisize = s; }

BMMExport void ResetPiData ( )

Resets the plugin data stored on the BitmapInfo.

Frees existing plugin data memory and sets plugin data size to zero.

BMMExport BOOL AllocPiData ( DWORD size )

Allocates the plugin data memory and set the plugin data size.

Acquire the pointer to the plugin data memory via GetPiData()

Parameters

[in] size Requested size of the plugin data.

BMMExport void* CreateFmtSpecBlock ( void )

Remarks: This method is available in release 2.0 and later only.

This method provides some access to device specific data (for instance the compression ratio in a JPEG file). This method will return a buffer containing a given device specific data (or NULL if the device referenced is unknown or doesn't have "specific data"). The buffer structure will depend on the device. For all drivers shipped with the SDK, this structure is defined in their header files (which must be included in the project for which this method is used). Internally, this method validates the driver, calls its EvaluateConfigure() method to define the buffer size, creates this buffer and, if the returned size is greater than zero, calls the driver's SaveConfigure() method in order to set default values. The developer may then change whatever they want, create and write a file using this BitmapInfo which includes the device's specific data.

There is no need to free this buffer as this is handled by the BitmapInfo destructor.

Note: The name and/or device properties must be defined before using this method.

BMMExport void Copy	(	const BitmapInfo *	from,
		BOOL	copyProxySubject
	)

Assignment function. The data members of the specified BitmapInfo are copied to this BitmapInfo, with option to also copy the proxySubject info.

BMMExport void Copy ( const BitmapInfo * from )

BMMExport BitmapInfo& operator= ( const BitmapInfo & from )

Remarks: Assignment operator. The data members of the specified BitmapInfo are copied to this BitmapInfo.

Parameters:: BitmapInfo &from

The source BitmapInfo.

BMMExport IOResult Save ( ISave * isave )

BMMExport IOResult Load ( ILoad * iload )

BMMExport void EnumAuxFiles	(	AssetEnumCallback &	assetEnum,
		DWORD	vflags
	)

BMMExport BOOL Validate ( )

Remarks: Implemented by the System.

This method is used to check the width, height, aspect ratio, and gamma settings to make sure they are within an acceptable range of values. The comparison is as follows:

if (width < 1 ||

height < 1 ||

aspect <= 0.0 ||

gamma < MINGAMMA ||

gamma > MAXGAMMA)

return (FALSE);

else

return (TRUE);

Where:

#define MINGAMMA 0.2f

#define MAXGAMMA 5.0f

Returns: TRUE if the BitmapInfo's settings are valid ; otherwise FALSE.

BMMExport HWND GetUpdateWindow ( )

inline

Remarks: Returns the window handle to send progress or check abort messages to.

1394 { return hWnd; }

BMMExport void SetUpdateWindow ( HWND hwnd )

inline

Remarks: This is used internally - the system calls this method. This is how a window handle is sent down to device drivers and filters so they can send progress reports and check for cancel.

1398 { hWnd = hwnd; }

BMMExport DWORD GetGChannels ( )

BMMExport DWORD GetDeviceFlags ( )

BMMExport BOOL FixDeviceName ( )

Sets the appropriate device name, as derived from the filename.

BitmapInfo Class Reference

Class Description

Public Member Functions

Additional Inherited Members

Constructor & Destructor Documentation

Member Function Documentation