iEPolyMod.h File Reference

#include "iFnPub.h"
#include "mnmesh.h"

Classes
class	EPolyMod
	This class is the published interface for Edit Poly modifiers. More...
class	EPolyMod13
	This new class extends EPolyMode, in particular adds a more efficient way for setting several vertex positions, and the ability for EPolyMod to support manipulate grips. More...
class	EPolyMod18
	This new class for Phoenix extends EPolyMod for altering vertex and edge Crease/Weight/etc. values. More...

Macros
#define	EPOLY_MOD_INTERFACE   Interface_ID(0x405e217d, 0x49c2abc)
#define	GetEPolyModInterface(cd)   (EPolyMod *)(cd)->GetInterface(EPOLY_MOD_INTERFACE)
#define	EPOLY_MOD13_INTERFACE   Interface_ID(0x1a4cc8f2, 0x71682518)
#define	GetEPolyMod13Interface(cd)   (EPolyMod13 *)(cd)->GetInterface(EPOLY_MOD13_INTERFACE)
#define	EPOLY_MOD18_INTERFACE   Interface_ID(0x6e9e5fbe, 0x231826c7)
#define	GetEPolyMod18Interface(cd)   (EPolyMod18 *)(cd)->GetInterface(EPOLY_MOD18_INTERFACE)
#define	epm_edge_chamfer_segments   epm_reserved1
#define	EDIT_POLY_DISABLE_IN_ANIMATE

Enumerations
enum	{ EP_STANDARD_EDGE_CHAMFER = 0, EP_QUAD_EDGE_CHAMFER }
enum	{ EP_EDGE_CHAMFER_SMOOTH_ALL = 0, EP_EDGE_CHAMFER_SMOOTH_CHAMFER }
enum	ePolyModSelLevel {   EPM_SL_OBJECT, EPM_SL_VERTEX, EPM_SL_EDGE, EPM_SL_BORDER,   EPM_SL_FACE, EPM_SL_ELEMENT, EPM_SL_CURRENT }
enum	epolyModParameters {   epm_animation_mode, epm_show_cage, epm_by_vertex, epm_ignore_backfacing,   epm_stack_selection, epm_ss_use, epm_ss_edist_use, epm_ss_edist,   epm_ss_affect_back, epm_ss_falloff, epm_ss_pinch, epm_ss_bubble,   epm_current_operation, epm_world_to_object_transform, epm_constrain_type, epm_split,   epm_ms_smoothness, epm_ms_sep_smooth, epm_ms_sep_mat, epm_tess_type,   epm_tess_tension, epm_bridge_taper, epm_bridge_bias, epm_align_type,   epm_align_plane_normal, epm_align_plane_offset, epm_delete_isolated_verts, epm_weld_vertex_threshold,   epm_chamfer_vertex, epm_extrude_vertex_width, epm_extrude_vertex_height, epm_connect_edge_segments,   epm_weld_edge_threshold, epm_extrude_edge_height, epm_extrude_edge_width, epm_chamfer_edge,   epm_extrude_face_type, epm_extrude_face_height, epm_bevel_type, epm_bevel_height,   epm_bevel_outline, epm_inset_type, epm_inset, epm_outline,   epm_hinge_angle, epm_hinge_base, epm_hinge_dir, epm_hinge_segments,   epm_extrude_spline_node, epm_extrude_spline_segments, epm_extrude_spline_taper, epm_extrude_spline_taper_curve,   epm_extrude_spline_twist, epm_extrude_spline_rotation, epm_extrude_spline_align, epm_autosmooth_threshold,   epm_smooth_group_set, epm_smooth_group_clear, epm_material, epm_material_selby,   epm_material_selby_clear, epm_smoother_selby, epm_smoother_selby_clear, epm_clone_to_element,   epm_bridge_segments, epm_bridge_smooth_thresh, epm_bridge_target_1, epm_bridge_target_2,   epm_bridge_twist_1, epm_bridge_twist_2, epm_bridge_selected, epm_preserve_maps,   epm_relax_amount, epm_relax_iters, epm_relax_hold_boundary, epm_relax_hold_outer,   epm_select_by_angle, epm_select_angle, epm_ss_lock, epm_paintsel_value,   epm_paintsel_size, epm_paintsel_strength, epm_paintdeform_value, epm_paintdeform_size,   epm_paintdeform_strength, epm_paintdeform_axis, epm_reserved1, epm_reserved2,   epm_reserved3, epm_reserved4, epm_reserved5, epm_connect_edge_pinch,   epm_connect_edge_slide, epm_loop_edge_sel, epm_ring_edge_sel, epm_remove_edge_ctrl,   epm_cage_color, epm_selected_cage_color, epm_cage_color_changed, epm_selected_cage_color_changed,   epm_chamfer_vertex_open, epm_chamfer_edge_open, epm_bridge_adjacent, epm_bridge_reverse_triangle,   epm_break_vertex_distance, epm_paintsel_mode, epm_paintdeform_mode, epm_select_mode,   epm_edge_chamfer_type, epm_edge_chamfer_tension, epm_edge_chamfer_invert, epm_edge_chamfer_smooth,   epm_edge_chamfer_smooth_type, epm_edge_chamfer_smooth_threshold, epm_data_channel, epm_data_value,   epm_hard_edge_display_color, epm_hard_edge_display }
enum	epolyModButtonOp {   ep_op_null, ep_op_hide_vertex, ep_op_hide_face, ep_op_unhide_vertex,   ep_op_unhide_face, ep_op_hide_unsel_vertex, ep_op_hide_unsel_face, ep_op_ns_copy,   ep_op_ns_paste, ep_op_cap, ep_op_delete_vertex, ep_op_delete_face,   ep_op_detach_vertex, ep_op_detach_face, ep_op_split, ep_op_break,   ep_op_collapse_vertex, ep_op_collapse_edge, ep_op_collapse_face, ep_op_reset_plane,   ep_op_slice, ep_op_slice_face, ep_op_weld_vertex, ep_op_weld_edge,   ep_op_create_shape, ep_op_make_planar, ep_op_remove_iso_verts, ep_op_meshsmooth,   ep_op_tessellate, ep_op_retriangulate, ep_op_flip_face, ep_op_flip_element,   ep_op_bevel, ep_op_chamfer_vertex, ep_op_chamfer_edge, ep_op_cut,   ep_op_sel_grow, ep_op_sel_shrink, ep_op_inset, ep_op_extrude_vertex,   ep_op_extrude_edge, ep_op_extrude_face, ep_op_extrude_along_spline, ep_op_connect_edge,   ep_op_connect_vertex, ep_op_hinge_from_edge, ep_op_select_ring, ep_op_select_loop,   ep_op_remove_iso_map_verts, ep_op_remove_vertex, ep_op_remove_edge, ep_op_outline,   ep_op_toggle_shaded_faces, ep_op_transform, ep_op_delete_edge, ep_op_unused,   ep_op_create, ep_op_align, ep_op_attach, ep_op_target_weld_vertex,   ep_op_target_weld_edge, ep_op_edit_triangulation, ep_op_create_edge, ep_op_clone_vertex,   ep_op_clone_edge, ep_op_clone_face, ep_op_insert_vertex_edge, ep_op_insert_vertex_face,   ep_op_autosmooth, ep_op_smooth, ep_op_set_material, ep_op_select_by_smooth,   ep_op_select_by_material, ep_op_get_stack_selection, ep_op_bridge_border, ep_op_bridge_polygon,   ep_op_make_planar_x, ep_op_make_planar_y, ep_op_make_planar_z, ep_op_turn_edge,   ep_op_relax, ep_op_paint_deform, ep_op_bridge_edge, ep_op_preserve_uv_settings,   ep_op_remove_edge_remove_verts, ep_op_set_vertex_data, ep_op_set_edge_data, ep_op_make_hard_edges,   ep_op_make_smooth_edges, ep_op_select_hard_edges, ep_op_select_smooth_edges }
enum	epolyModCommandMode {   ep_mode_create_vertex, ep_mode_create_edge, ep_mode_create_face, ep_mode_divide_edge,   ep_mode_divide_face, ep_mode_extrude_vertex, ep_mode_extrude_edge, ep_mode_extrude_face,   ep_mode_chamfer_vertex, ep_mode_chamfer_edge, ep_mode_bevel, ep_mode_sliceplane,   ep_mode_cut, ep_mode_weld, ep_mode_edit_tri, ep_mode_inset_face,   ep_mode_quickslice, ep_mode_hinge_from_edge, ep_mode_pick_hinge, ep_mode_outline,   ep_mode_bridge_border, ep_mode_bridge_polygon, ep_mode_pick_bridge_1, ep_mode_pick_bridge_2,   ep_mode_turn_edge, ep_mode_bridge_edge, ep_mode_edit_ss, ep_mode_subobjectpick,   ep_mode_point_to_point }
enum	epolyModPickMode { ep_mode_attach, ep_mode_pick_shape }
enum	epolyModMethods {   epmod_get_sel_level, epmod_get_mn_sel_level, epmod_set_sel_level, epmod_get_operation,   epmod_set_operation, epmod_local_data_changed, epmod_refresh_screen, epmod_commit,   epmod_commit_unless_animating, epmod_commit_and_repeat, epmod_cancel_operation, epmod_convert_selection,   epmod_get_selection, epmod_set_selection, epmod_select, epmod_set_primary_node,   epmod_toggle_command_mode, epmod_enter_command_mode, epmod_enter_pick_mode, epmod_get_command_mode,   epmod_get_pick_mode, epmod_popup_dialog, epmod_button_op, epmod_repeat_last,   epmod_in_slice_mode, epmod_reset_slice_plane, epmod_get_slice_plane_tm, epmod_get_slice_plane,   epmod_set_slice_plane, epmod_create_vertex, epmod_create_face, epmod_create_edge,   epmod_set_diagonal, epmod_cut, epmod_target_weld_vertex, epmod_target_weld_edge,   epmod_attach_node, epmod_attach_nodes, epmod_detach_to_object, epmod_create_shape,   epmod_bridge_borders, epmod_bridge_polygons, epmod_set_bridge_node, epmod_get_bridge_node,   epmod_ready_to_bridge_selected, epmod_get_preserve_map, epmod_set_preserve_map, epmod_turn_diagonal,   epmod_get_num_vertices, epmod_get_vertex, epmod_get_vertex_face_count, epmod_get_vertex_face,   epmod_get_vertex_edge_count, epmod_get_vertex_edge, epmod_get_num_edges, epmod_get_edge_vertex,   epmod_get_edge_face, epmod_get_num_faces, epmod_get_face_degree, epmod_get_face_vertex,   epmod_get_face_edge, epmod_get_face_diagonal, epmod_get_face_material, epmod_get_face_smoothing_group,   epmod_get_num_map_channels, epmod_get_map_channel_active, epmod_get_num_map_vertices, epmod_get_map_vertex,   epmod_get_map_face_vertex, epmod_get_face_normal, epmod_get_face_center, epmod_get_face_area,   epmod_get_open_edges, epmod_get_verts_by_flag, epmod_get_edges_by_flag, epmod_get_faces_by_flag,   epmod_set_vertex_flags, epmod_set_edge_flags, epmod_set_face_flags, epmod_get_vertex_flags,   epmod_get_edge_flags, epmod_get_face_flags, epmod_get_verts_using_edge, epmod_get_edges_using_vert,   epmod_get_faces_using_edge, epmod_get_elements_using_face, epmod_get_faces_using_vert, epmod_get_verts_using_face,   epmod_set_vert, epmod_move_selection, epmod_move_slicer, epmod_rotate_selection,   epmod_rotate_slicer, epmod_scale_selection, epmod_scale_slicer, epmod_list_operations,   epmod_set_hinge_edge, epmod_get_hinge_edge, epmod_bridge_edges, epmod_in_slice,   epmod_show_operation_dialog, epmod_showing_operation_dialog, epmod_close_operation_dialog, epmod_get_primary_node,   epmod_get_node_tm, epmod_set_cut_end, epmod_get_last_cut_end, epmod_clear_last_cut_end,   epmod_cut_cancel, epmod_divide_edge, epmod_divide_face, epmod_ring_sel,   epmod_loop_sel, epmod_convert_selection_to_border, epmod_paintdeform_commit, epmod_paintdeform_cancel,   epmod_matid_floater, epmod_matid_floatervisible, epmod_smgrp_floater, epmod_smgrp_floatervisible,   epmod_set_vertex_float, epmod_set_edge_float }

Variables
const int	meshSelLevel []

Macro Definition Documentation

#define EPOLY_MOD_INTERFACE   Interface_ID(0x405e217d, 0x49c2abc)

#define GetEPolyModInterface

(

cd

)

(EPolyMod *)(cd)->GetInterface(EPOLY_MOD_INTERFACE)

#define EPOLY_MOD13_INTERFACE   Interface_ID(0x1a4cc8f2, 0x71682518)

#define GetEPolyMod13Interface

(

cd

)

(EPolyMod13 *)(cd)->GetInterface(EPOLY_MOD13_INTERFACE)

#define EPOLY_MOD18_INTERFACE   Interface_ID(0x6e9e5fbe, 0x231826c7)

#define GetEPolyMod18Interface

(

cd

)

(EPolyMod18 *)(cd)->GetInterface(EPOLY_MOD18_INTERFACE)

#define epm_edge_chamfer_segments   epm_reserved1

#define EDIT_POLY_DISABLE_IN_ANIMATE

Enumeration Type Documentation

anonymous enum

Enumerator
EP_STANDARD_EDGE_CHAMFER
EP_QUAD_EDGE_CHAMFER

     {
    EP_STANDARD_EDGE_CHAMFER = 0,
    EP_QUAD_EDGE_CHAMFER
};

anonymous enum

Enumerator
EP_EDGE_CHAMFER_SMOOTH_ALL
EP_EDGE_CHAMFER_SMOOTH_CHAMFER

     {
    EP_EDGE_CHAMFER_SMOOTH_ALL = 0,     // Entire object
    EP_EDGE_CHAMFER_SMOOTH_CHAMFER      // Just the chamfers we created
};

enum ePolyModSelLevel

Enumerator
EPM_SL_OBJECT
EPM_SL_VERTEX
EPM_SL_EDGE
EPM_SL_BORDER
EPM_SL_FACE
EPM_SL_ELEMENT
EPM_SL_CURRENT

                      { EPM_SL_OBJECT, EPM_SL_VERTEX, EPM_SL_EDGE, 
    EPM_SL_BORDER, EPM_SL_FACE, EPM_SL_ELEMENT, EPM_SL_CURRENT };

enum epolyModParameters

Enumerator
epm_animation_mode
epm_show_cage
epm_by_vertex
epm_ignore_backfacing
epm_stack_selection
epm_ss_use
epm_ss_edist_use
epm_ss_edist
epm_ss_affect_back
epm_ss_falloff
epm_ss_pinch
epm_ss_bubble
epm_current_operation
epm_world_to_object_transform
epm_constrain_type
epm_split
epm_ms_smoothness
epm_ms_sep_smooth
epm_ms_sep_mat
epm_tess_type
epm_tess_tension
epm_bridge_taper
epm_bridge_bias
epm_align_type
epm_align_plane_normal
epm_align_plane_offset
epm_delete_isolated_verts
epm_weld_vertex_threshold
epm_chamfer_vertex
epm_extrude_vertex_width
epm_extrude_vertex_height
epm_connect_edge_segments
epm_weld_edge_threshold
epm_extrude_edge_height
epm_extrude_edge_width
epm_chamfer_edge
epm_extrude_face_type
epm_extrude_face_height
epm_bevel_type
epm_bevel_height
epm_bevel_outline
epm_inset_type
epm_inset
epm_outline
epm_hinge_angle
epm_hinge_base
epm_hinge_dir
epm_hinge_segments
epm_extrude_spline_node
epm_extrude_spline_segments
epm_extrude_spline_taper
epm_extrude_spline_taper_curve
epm_extrude_spline_twist
epm_extrude_spline_rotation
epm_extrude_spline_align
epm_autosmooth_threshold
epm_smooth_group_set
epm_smooth_group_clear
epm_material
epm_material_selby
epm_material_selby_clear
epm_smoother_selby
epm_smoother_selby_clear
epm_clone_to_element
epm_bridge_segments
epm_bridge_smooth_thresh
epm_bridge_target_1
epm_bridge_target_2
epm_bridge_twist_1
epm_bridge_twist_2
epm_bridge_selected
epm_preserve_maps
epm_relax_amount
epm_relax_iters
epm_relax_hold_boundary
epm_relax_hold_outer
epm_select_by_angle
epm_select_angle
epm_ss_lock
epm_paintsel_value
epm_paintsel_size
epm_paintsel_strength
epm_paintdeform_value
epm_paintdeform_size
epm_paintdeform_strength
epm_paintdeform_axis
epm_reserved1
epm_reserved2
epm_reserved3
epm_reserved4
epm_reserved5
epm_connect_edge_pinch
epm_connect_edge_slide
epm_loop_edge_sel
epm_ring_edge_sel
epm_remove_edge_ctrl
epm_cage_color
epm_selected_cage_color
epm_cage_color_changed
epm_selected_cage_color_changed
epm_chamfer_vertex_open
epm_chamfer_edge_open
epm_bridge_adjacent
epm_bridge_reverse_triangle
epm_break_vertex_distance
epm_paintsel_mode
epm_paintdeform_mode
epm_select_mode
epm_edge_chamfer_type
epm_edge_chamfer_tension
epm_edge_chamfer_invert
epm_edge_chamfer_smooth
epm_edge_chamfer_smooth_type
epm_edge_chamfer_smooth_threshold
epm_data_channel
epm_data_value
epm_hard_edge_display_color
epm_hard_edge_display

                        {

    epm_animation_mode,     // int - is the Edit Poly in modeling mode (0) or animation mode (1)
    epm_show_cage,          // BOOL - indicates if the Edit Poly is set to display the cage

    epm_by_vertex,          // BOOL - indicates if the Edit Poly is selecting by vertex.
    epm_ignore_backfacing,  // BOOL - indicates if the Edit Poly is ignoring backfacing when the user selects subobjects.
    epm_stack_selection,    // BOOL - indicates whether or not the Edit Poly is using the subobject selection from the stack below it.

    epm_ss_use,             // BOOL - Is the Edit Poly using soft selection?
    epm_ss_edist_use,       // BOOL - Is the Edit Poly soft selection using edge distances or not?
    epm_ss_edist,           // int - How many edges do we traverse in determining soft selection?  (Ignored if epm_ss_edist_use is set to false.)
    epm_ss_affect_back,     // BOOL - Should soft selection affect backfacing?
    epm_ss_falloff,         // float - soft selection falloff value
    epm_ss_pinch,           // float - soft selection pinch value
    epm_ss_bubble,          // float - soft selection bubble value

    epm_current_operation,  // int - indicates current operation, which should be one of the epolyModButtonOp enums.

    epm_world_to_object_transform, // Matrix3 - Worldspace to common Objectspace transform.  Used in combination with the local mod context tms, this can give us relative WS-to-OS transforms for each modifier instance.  See Edit Poly source for examples of use.

    epm_constrain_type,     // int - Represents the current vertex constraints.  0 for no constraints, 1 for constrain-to-edge, 2 for constrain-to-face, 3 for constrain-to-normal.

    epm_split,              // BOOL - indicates whether Cut and Slice (ep_op_cut, ep_op_slice, ep_op_slice_face) operations should split the mesh, or merely refine it.

    epm_ms_smoothness,      // float - Smoothness parameter for MeshSmooth operation (ep_op_meshsmooth)
    epm_ms_sep_smooth,      // BOOL - Separate-by-smoothing-groups parameter for MeshSmooth operation (ep_op_meshsmooth)
    epm_ms_sep_mat,         // BOOL - Separate-by-materials parameter for MeshSmooth operation (ep_op_meshsmooth)

    epm_tess_type,          // int - Type of Tessellation (ep_op_tessellate) - 0 for 
    epm_tess_tension,       // float - tension parameter for Tessellation operation (ep_op_tessellate)

    epm_bridge_taper,       // float - Taper parameter for Bridge operation (ep_op_bridge_border, ep_op_bridge_polygon)
    epm_bridge_bias,        // float - Bias parameter for Bridge operation (ep_op_bridge_border, ep_op_bridge_polygon)

    epm_align_type,         // int - whether to align to view (0) or construction plane (1) in future uses of ep_op_align
    epm_align_plane_normal, // Point3 - describes the plane normal currently used for alignment.
    epm_align_plane_offset, // float - describes the plane offset currently used for alignment.  (The normal and offset together describe a plane.)

    epm_delete_isolated_verts,  // BOOL - Indicates whether the Edit Poly deletes freshly isolated vertices when deleting faces.

    epm_weld_vertex_threshold,  // float - The threshold used when welding selected vertices (ep_op_weld_vertex)

    epm_chamfer_vertex,         // float - the "amount" parameter for the Chamfer Vertex operation (ep_op_chamfer_vertex)

    epm_extrude_vertex_width,   // float - the width of the extrusion for the Extrude Vertex operation (ep_op_extrude_vertex)
    epm_extrude_vertex_height,  // float - the height of the extrusion for the Extrude Vertex operation (ep_op_extrude_vertex)

    epm_connect_edge_segments,  // int - the number of segments to use when connecting edges (ep_op_conect_edge)

    epm_weld_edge_threshold,    // float - The threshold used when welding selected edges (ep_op_weld_edge)

    epm_extrude_edge_height,    // float - the height of the extrusion for the Extrude Edge operation (ep_op_extrude_edge)
    epm_extrude_edge_width,     // float - the width of the extrusion for the Extrude Edge operation (ep_op_extrude_edge)

    epm_chamfer_edge,           // float - the "amount" parameter for the Chamfer Edge operation (ep_op_chamfer_edge)

    epm_extrude_face_type,      // int - indicates the type of face extrusion - 0 for Group Normals, 1 for Local Normals, 2 for By Polygon (ep_op_extrude_face)
    epm_extrude_face_height,    // float - indicates the height of the face extrusion (ep_op_extrude_face)

    epm_bevel_type,             // int - indicates the type of face extrusion used in beveling - 0 for Group Normals, 1 for Local Normals, 2 for By Polygon (ep_op_bevel)
    epm_bevel_height,           // float - height of the face bevel (ep_op_bevel)
    epm_bevel_outline,          // float - "outline" amount (amount to move vertices in or out) in the Bevel operation (ep_op_bevel)

    epm_inset_type,             // int - indicates the type of face extrusion used in insetting - 0 for Group Normals, 1 for Local Normals, 2 for By Polygon (ep_op_inset)
    epm_inset,                  // float - the amount of the inset (ep_op_inset)

    epm_outline,                // float - the amount of outlining (ep_op_outline)

    epm_hinge_angle,            // float - the angle to use in Hinge from Edge (ep_op_hinge_from_edge)
    epm_hinge_base,             // Point3 - the base of the hinge (ep_op_hinge_from_edge)
    epm_hinge_dir,              // Point3 - the direction of the hinge - combine with epm_hinge_base to get a complete ray for the hinge (ep_op_hinge_from_edge)
    epm_hinge_segments,         // int - the number of segments to use on the sides of the Hinge from Edge extrusion (ep_op_hinge_from_edge)

    epm_extrude_spline_node,        // INode - the node of the spline to use in Extrude along Spline (ep_op_extrude_along_spline)
    epm_extrude_spline_segments,    // int - the number of segments in Extrude along Spline (ep_op_extrude_along_spline)
    epm_extrude_spline_taper,       // float - the amount of tapering to use in Extrude along Spline (ep_op_extrude_along_spline)
    epm_extrude_spline_taper_curve, // float - the taper curve for Extrude along Spline (ep_op_extrude_along_spline)
    epm_extrude_spline_twist,       // float - the amount of twist (in radians) for Extrude along Spline (ep_op_extrude_along_spline)
    epm_extrude_spline_rotation,    // float - the rotation (in radians) around the face normal for Extrude along Spline (ep_op_extrude_along_spline)
    epm_extrude_spline_align,       // BOOL - whether or not to try to align the extrusion spline to match the face normal (ep_op_extrude_along_spline)

    epm_autosmooth_threshold,   // float - the threshold for autosmoothing across edges, in radians (ep_op_autosmooth)
    epm_smooth_group_set,       // DWORD cast as an int - the set of smoothing groups to set (ep_op_smooth)
    epm_smooth_group_clear,     // DWORD cast as an int - the set of smoothing groups to clear (ep_op_smooth)

    epm_material,               // int - the material ID to set on selected faces (ep_op_set_material)

    epm_material_selby,         // int - the material ID to select faces by (ep_op_select_by_material)
    epm_material_selby_clear,   // BOOL - whether or not to clear the previous selection before selecting by material (ep_op_select_by_material)

    epm_smoother_selby,         // DWORD cast as an int - the set of smoothing groups to select faces by (ep_op_select_by_smooth)
    epm_smoother_selby_clear,   // BOOL - whether or not to clear the previous selection before selecting faces by smoothing group (ep_op_select_by_smooth)

    epm_clone_to_element,       // BOOL - whether to clone to an element or to a separate object.

    epm_bridge_segments,        // int - the number of segments for bridge operations
    epm_bridge_smooth_thresh,   // float - the smoothing threshold for successive bridge columns (in radians)
    epm_bridge_target_1,        // int - the first edge or face we're bridging between, in 1-based indexing.  (Value of 0 indicates not set yet.)
    epm_bridge_target_2,        // int - the second edge or face we're bridging between, in 1-based indexing.  (Value of 0 indicates not set yet.)
    epm_bridge_twist_1,         // int - the Twist amount for the first end of the bridge.
    epm_bridge_twist_2,         // int - the Twist amount for the second end of the bridge
    epm_bridge_selected,        // BOOL - false indicates we should bridge between the specific targets given in epm_bridge_target_1 and _2, true indicates we should bridge selected borders or polgyons.

    epm_preserve_maps,          // BOOL - Indicates whether map values should be "preserved" in geometric deformations such as subobject transforms.

    epm_relax_amount,           // float - the relax Amount parameter - range of 0 (no relaxing) to 1 (maximum relaxing), default of .5
    epm_relax_iters,            // int - the number of iterations of the relax algorithm to apply.
    epm_relax_hold_boundary,    // BOOL - Indicates whether or not to fix boundary points in place when relaxing
    epm_relax_hold_outer,       // BOOL - Indicates whether or not to fix "outer" points in place when relaxing.  (See the MNMeshUtilities::Relax declaration in MNMesh.h for further explanation.)

    epm_select_by_angle,        // BOOL - Indicates whether Polygon selections should be expanded depending on edge angles.
    epm_select_angle,           // float - Indicates the maximum angle used in expanding polygon selections.  (Ignored if epm_select_by_angle is false.)

    // Paint tools
    epm_ss_lock,
    epm_paintsel_value, epm_paintsel_size, epm_paintsel_strength,
    epm_paintdeform_value, epm_paintdeform_size, epm_paintdeform_strength,
    epm_paintdeform_axis,

    epm_reserved1,                  // obsolete -- SEE the #define epm_edge_chamfer_segments epm_reserved1
                                    // beneath this enum!
    epm_reserved2,                  // obsolete
    epm_reserved3,                  // obsolete
    epm_reserved4,                  // obsolete
    epm_reserved5,                  // obsolete
    
    epm_connect_edge_pinch,         // float    - distance between new edges created when connecting edges
    epm_connect_edge_slide,         // float    - start position for edge connection
    epm_loop_edge_sel,              // int      - loop spinner value
    epm_ring_edge_sel,              // int      - ring spinner value
    epm_remove_edge_ctrl,           // BOOOL    - is control key pressed when removing edges ? 
    epm_cage_color,                 // Point3   - the user supplied cage color 
    epm_selected_cage_color,        // Point3   - the user supplied cage color for selected objects
    epm_cage_color_changed,         // int      - has the cage color been changed 
    epm_selected_cage_color_changed,// int      - has the selected cage color been changed 
    epm_chamfer_vertex_open,        // BOOL     - is a vertex chamfer creating a hole ? 
    epm_chamfer_edge_open,          // BOOL     - is an edge chamfer creating a hole ? 
    epm_bridge_adjacent,            // float    - the angle limit used for bridging adjacent edges 
    epm_bridge_reverse_triangle,    // BOOL     - is a triangle to be reversed when bridging edges ?
    epm_break_vertex_distance,      // float    - the distance used for opening vertices

    epm_paintsel_mode,
    epm_paintdeform_mode,

    epm_select_mode,                // BOOL     -  the select mode that we are in, none, sub object, or multi.

    // new for 9.5
    //epm_edge_chamfer_segments  // int - the number of new edges to create per selected edge (ep_edge_chamfer_segments)
                                 // SEE #define BELOW!
    // new for 2015
    epm_edge_chamfer_type,      // int      - Chamfer type -- standard or quad
    epm_edge_chamfer_tension,   // float    - Quad chamfer tension
    epm_edge_chamfer_invert,        // bool     - For Quad Chamfers, when epm_chamfer_edge_open is true, this inverts the output
    epm_edge_chamfer_smooth,        // bool     - For Quad Chamfers, tells whether to smooth the output
    epm_edge_chamfer_smooth_type,       // int      - For Quad Chamfers, when epm_edge_chamfer_smooth==true, tells what kind of smoothing (see EP_QUAD_SMOOTH_XXX)
    epm_edge_chamfer_smooth_threshold,      // float        - For Quad Chamfers, when epm_edge_chamfer_smooth==true, gives smoothing threshold

    // New for 2016
    epm_data_channel,               // int      - Channel number for vertex or edge
    epm_data_value,                 // float    - Data value applied to selected verts or edges
    epm_hard_edge_display_color,    // color    - Color for hard edge display
    epm_hard_edge_display,          // int      - Option for hard edge display -- see EP_HARD_EDGE_DISPLAY_XXX
};

enum epolyModButtonOp

Enumerator
ep_op_null
ep_op_hide_vertex
ep_op_hide_face
ep_op_unhide_vertex
ep_op_unhide_face
ep_op_hide_unsel_vertex
ep_op_hide_unsel_face
ep_op_ns_copy
ep_op_ns_paste
ep_op_cap
ep_op_delete_vertex
ep_op_delete_face
ep_op_detach_vertex
ep_op_detach_face
ep_op_split
ep_op_break
ep_op_collapse_vertex
ep_op_collapse_edge
ep_op_collapse_face
ep_op_reset_plane
ep_op_slice
ep_op_slice_face
ep_op_weld_vertex
ep_op_weld_edge
ep_op_create_shape
ep_op_make_planar
ep_op_remove_iso_verts
ep_op_meshsmooth
ep_op_tessellate
ep_op_retriangulate
ep_op_flip_face
ep_op_flip_element
ep_op_bevel
ep_op_chamfer_vertex
ep_op_chamfer_edge
ep_op_cut
ep_op_sel_grow
ep_op_sel_shrink
ep_op_inset
ep_op_extrude_vertex
ep_op_extrude_edge
ep_op_extrude_face
ep_op_extrude_along_spline
ep_op_connect_edge
ep_op_connect_vertex
ep_op_hinge_from_edge
ep_op_select_ring
ep_op_select_loop
ep_op_remove_iso_map_verts
ep_op_remove_vertex
ep_op_remove_edge
ep_op_outline
ep_op_toggle_shaded_faces
ep_op_transform
ep_op_delete_edge
ep_op_unused
ep_op_create
ep_op_align
ep_op_attach
ep_op_target_weld_vertex
ep_op_target_weld_edge
ep_op_edit_triangulation
ep_op_create_edge
ep_op_clone_vertex
ep_op_clone_edge
ep_op_clone_face
ep_op_insert_vertex_edge
ep_op_insert_vertex_face
ep_op_autosmooth
ep_op_smooth
ep_op_set_material
ep_op_select_by_smooth
ep_op_select_by_material
ep_op_get_stack_selection
ep_op_bridge_border
ep_op_bridge_polygon
ep_op_make_planar_x
ep_op_make_planar_y
ep_op_make_planar_z
ep_op_turn_edge
ep_op_relax
ep_op_paint_deform
ep_op_bridge_edge
ep_op_preserve_uv_settings
ep_op_remove_edge_remove_verts
ep_op_set_vertex_data	New for 3ds Max 2016...
ep_op_set_edge_data
ep_op_make_hard_edges
ep_op_make_smooth_edges
ep_op_select_hard_edges
ep_op_select_smooth_edges

                      { ep_op_null,
    ep_op_hide_vertex, ep_op_hide_face,
    ep_op_unhide_vertex, ep_op_unhide_face,
    ep_op_hide_unsel_vertex, ep_op_hide_unsel_face,
    ep_op_ns_copy, ep_op_ns_paste, ep_op_cap,
    ep_op_delete_vertex, ep_op_delete_face, ep_op_detach_vertex, ep_op_detach_face,
    ep_op_split, ep_op_break, ep_op_collapse_vertex, ep_op_collapse_edge,
    ep_op_collapse_face, ep_op_reset_plane, ep_op_slice, ep_op_slice_face,
    ep_op_weld_vertex, ep_op_weld_edge, ep_op_create_shape, ep_op_make_planar, ep_op_remove_iso_verts,
    ep_op_meshsmooth, ep_op_tessellate, ep_op_retriangulate,
    ep_op_flip_face, ep_op_flip_element, ep_op_bevel, ep_op_chamfer_vertex,
    ep_op_chamfer_edge, ep_op_cut,
    ep_op_sel_grow, ep_op_sel_shrink, ep_op_inset, ep_op_extrude_vertex,
    ep_op_extrude_edge, ep_op_extrude_face,
    ep_op_extrude_along_spline, ep_op_connect_edge, ep_op_connect_vertex,
    ep_op_hinge_from_edge, ep_op_select_ring, ep_op_select_loop,
    ep_op_remove_iso_map_verts, ep_op_remove_vertex, ep_op_remove_edge, ep_op_outline,
    ep_op_toggle_shaded_faces,
    ep_op_transform, ep_op_delete_edge, ep_op_unused,
    ep_op_create, ep_op_align,
    ep_op_attach, ep_op_target_weld_vertex, ep_op_target_weld_edge,
    ep_op_edit_triangulation, ep_op_create_edge,
    ep_op_clone_vertex, ep_op_clone_edge, ep_op_clone_face,
    ep_op_insert_vertex_edge, ep_op_insert_vertex_face,
    ep_op_autosmooth, ep_op_smooth, ep_op_set_material,
    ep_op_select_by_smooth, ep_op_select_by_material, ep_op_get_stack_selection,
    ep_op_bridge_border, ep_op_bridge_polygon, ep_op_make_planar_x, ep_op_make_planar_y,
    ep_op_make_planar_z, ep_op_turn_edge, ep_op_relax, ep_op_paint_deform,
    ep_op_bridge_edge, ep_op_preserve_uv_settings, ep_op_remove_edge_remove_verts,
    ep_op_set_vertex_data, ep_op_set_edge_data,
    ep_op_make_hard_edges, ep_op_make_smooth_edges,
    ep_op_select_hard_edges, ep_op_select_smooth_edges,
};

enum epolyModCommandMode

Enumerator
ep_mode_create_vertex
ep_mode_create_edge
ep_mode_create_face
ep_mode_divide_edge
ep_mode_divide_face
ep_mode_extrude_vertex
ep_mode_extrude_edge
ep_mode_extrude_face
ep_mode_chamfer_vertex
ep_mode_chamfer_edge
ep_mode_bevel
ep_mode_sliceplane
ep_mode_cut
ep_mode_weld
ep_mode_edit_tri
ep_mode_inset_face
ep_mode_quickslice
ep_mode_hinge_from_edge
ep_mode_pick_hinge
ep_mode_outline
ep_mode_bridge_border
ep_mode_bridge_polygon
ep_mode_pick_bridge_1
ep_mode_pick_bridge_2
ep_mode_turn_edge
ep_mode_bridge_edge
ep_mode_edit_ss	New edit soft selection command mode for 3ds max2009.
ep_mode_subobjectpick
ep_mode_point_to_point

                         { ep_mode_create_vertex, ep_mode_create_edge,
    ep_mode_create_face, ep_mode_divide_edge, ep_mode_divide_face,
    ep_mode_extrude_vertex, ep_mode_extrude_edge, ep_mode_extrude_face,
    ep_mode_chamfer_vertex, ep_mode_chamfer_edge, ep_mode_bevel,
    ep_mode_sliceplane, ep_mode_cut, ep_mode_weld, ep_mode_edit_tri,
    ep_mode_inset_face, ep_mode_quickslice, ep_mode_hinge_from_edge,
    ep_mode_pick_hinge, ep_mode_outline, ep_mode_bridge_border,
    ep_mode_bridge_polygon, ep_mode_pick_bridge_1, ep_mode_pick_bridge_2,
    ep_mode_turn_edge,  ep_mode_bridge_edge,
        ep_mode_edit_ss,

    //new command mode that lets the user pick the subobject mode
    ep_mode_subobjectpick,
    ep_mode_point_to_point
};

enum epolyModPickMode

Enumerator
ep_mode_attach
ep_mode_pick_shape

{ ep_mode_attach, ep_mode_pick_shape };

enum epolyModMethods

Enumerator
epmod_get_sel_level
epmod_get_mn_sel_level
epmod_set_sel_level
epmod_get_operation
epmod_set_operation
epmod_local_data_changed
epmod_refresh_screen
epmod_commit
epmod_commit_unless_animating
epmod_commit_and_repeat
epmod_cancel_operation
epmod_convert_selection
epmod_get_selection
epmod_set_selection
epmod_select
epmod_set_primary_node
epmod_toggle_command_mode
epmod_enter_command_mode
epmod_enter_pick_mode
epmod_get_command_mode
epmod_get_pick_mode
epmod_popup_dialog
epmod_button_op
epmod_repeat_last
epmod_in_slice_mode
epmod_reset_slice_plane
epmod_get_slice_plane_tm
epmod_get_slice_plane
epmod_set_slice_plane
epmod_create_vertex
epmod_create_face
epmod_create_edge
epmod_set_diagonal
epmod_cut
epmod_target_weld_vertex
epmod_target_weld_edge
epmod_attach_node
epmod_attach_nodes
epmod_detach_to_object
epmod_create_shape
epmod_bridge_borders
epmod_bridge_polygons
epmod_set_bridge_node
epmod_get_bridge_node
epmod_ready_to_bridge_selected
epmod_get_preserve_map
epmod_set_preserve_map
epmod_turn_diagonal
epmod_get_num_vertices
epmod_get_vertex
epmod_get_vertex_face_count
epmod_get_vertex_face
epmod_get_vertex_edge_count
epmod_get_vertex_edge
epmod_get_num_edges
epmod_get_edge_vertex
epmod_get_edge_face
epmod_get_num_faces
epmod_get_face_degree
epmod_get_face_vertex
epmod_get_face_edge
epmod_get_face_diagonal
epmod_get_face_material
epmod_get_face_smoothing_group
epmod_get_num_map_channels
epmod_get_map_channel_active
epmod_get_num_map_vertices
epmod_get_map_vertex
epmod_get_map_face_vertex
epmod_get_face_normal
epmod_get_face_center
epmod_get_face_area
epmod_get_open_edges
epmod_get_verts_by_flag
epmod_get_edges_by_flag
epmod_get_faces_by_flag
epmod_set_vertex_flags
epmod_set_edge_flags
epmod_set_face_flags
epmod_get_vertex_flags
epmod_get_edge_flags
epmod_get_face_flags
epmod_get_verts_using_edge
epmod_get_edges_using_vert
epmod_get_faces_using_edge
epmod_get_elements_using_face
epmod_get_faces_using_vert
epmod_get_verts_using_face
epmod_set_vert
epmod_move_selection
epmod_move_slicer
epmod_rotate_selection
epmod_rotate_slicer
epmod_scale_selection
epmod_scale_slicer
epmod_list_operations
epmod_set_hinge_edge
epmod_get_hinge_edge
epmod_bridge_edges
epmod_in_slice
epmod_show_operation_dialog
epmod_showing_operation_dialog
epmod_close_operation_dialog
epmod_get_primary_node
epmod_get_node_tm
epmod_set_cut_end
epmod_get_last_cut_end
epmod_clear_last_cut_end
epmod_cut_cancel
epmod_divide_edge
epmod_divide_face
epmod_ring_sel
epmod_loop_sel
epmod_convert_selection_to_border
epmod_paintdeform_commit
epmod_paintdeform_cancel
epmod_matid_floater
epmod_matid_floatervisible
epmod_smgrp_floater
epmod_smgrp_floatervisible
epmod_set_vertex_float
epmod_set_edge_float

                     {
    epmod_get_sel_level, epmod_get_mn_sel_level, epmod_set_sel_level,
    epmod_get_operation, epmod_set_operation, epmod_local_data_changed,
    epmod_refresh_screen, epmod_commit, epmod_commit_unless_animating,
    epmod_commit_and_repeat, epmod_cancel_operation, epmod_convert_selection, epmod_get_selection,
    epmod_set_selection, epmod_select, epmod_set_primary_node,
    epmod_toggle_command_mode, epmod_enter_command_mode, epmod_enter_pick_mode,
    epmod_get_command_mode, epmod_get_pick_mode,
    epmod_popup_dialog, epmod_button_op, epmod_repeat_last, epmod_in_slice_mode,
    epmod_reset_slice_plane, epmod_get_slice_plane_tm, epmod_get_slice_plane, epmod_set_slice_plane,
    epmod_create_vertex, epmod_create_face, epmod_create_edge, epmod_set_diagonal,
    epmod_cut, epmod_target_weld_vertex, epmod_target_weld_edge, epmod_attach_node,
    epmod_attach_nodes, epmod_detach_to_object, epmod_create_shape,
    epmod_bridge_borders, epmod_bridge_polygons, epmod_set_bridge_node, epmod_get_bridge_node,
    epmod_ready_to_bridge_selected,epmod_get_preserve_map, epmod_set_preserve_map,
    epmod_turn_diagonal,

    // Access to information about mesh:
    epmod_get_num_vertices, epmod_get_vertex, epmod_get_vertex_face_count, epmod_get_vertex_face,
    epmod_get_vertex_edge_count, epmod_get_vertex_edge, epmod_get_num_edges, epmod_get_edge_vertex,
    epmod_get_edge_face, epmod_get_num_faces, epmod_get_face_degree, epmod_get_face_vertex,
    epmod_get_face_edge, epmod_get_face_diagonal, epmod_get_face_material, epmod_get_face_smoothing_group,
    epmod_get_num_map_channels, epmod_get_map_channel_active,
    epmod_get_num_map_vertices, epmod_get_map_vertex, epmod_get_map_face_vertex,

    epmod_get_face_normal, epmod_get_face_center, epmod_get_face_area, epmod_get_open_edges,
    epmod_get_verts_by_flag, epmod_get_edges_by_flag, epmod_get_faces_by_flag,
    epmod_set_vertex_flags, epmod_set_edge_flags, epmod_set_face_flags,
    epmod_get_vertex_flags, epmod_get_edge_flags, epmod_get_face_flags,
    epmod_get_verts_using_edge, epmod_get_edges_using_vert, epmod_get_faces_using_edge,
    epmod_get_elements_using_face, epmod_get_faces_using_vert, epmod_get_verts_using_face,
    epmod_set_vert,

    epmod_move_selection, epmod_move_slicer, epmod_rotate_selection, epmod_rotate_slicer,
    epmod_scale_selection, epmod_scale_slicer,

    epmod_list_operations, epmod_set_hinge_edge, epmod_get_hinge_edge,
    epmod_bridge_edges,

    epmod_in_slice, epmod_show_operation_dialog, epmod_showing_operation_dialog, 
    epmod_close_operation_dialog, epmod_get_primary_node, epmod_get_node_tm, epmod_set_cut_end, 
    epmod_get_last_cut_end, epmod_clear_last_cut_end, epmod_cut_cancel, epmod_divide_edge, 
    epmod_divide_face,epmod_ring_sel, epmod_loop_sel,epmod_convert_selection_to_border,
    epmod_paintdeform_commit, epmod_paintdeform_cancel,

    epmod_matid_floater,epmod_matid_floatervisible,
    epmod_smgrp_floater,epmod_smgrp_floatervisible,

    // New for 2016
    epmod_set_vertex_float,
    epmod_set_edge_float

};

Variable Documentation

const int meshSelLevel[]

Initial value:

= { MNM_SL_OBJECT, MNM_SL_VERTEX, MNM_SL_EDGE, MNM_SL_EDGE,
    MNM_SL_FACE, MNM_SL_FACE, MNM_SL_CURRENT }