#include <MFnAnimCurve.h>

Class Description

Anim Curve Function Set.

Create, query and edit Anim Curve Nodes and the keys internal to those Nodes.

Create an Anim Curve Node and connect its output to any animatable attribute on another Node.

Evaluate an Anim Curve at a particular time.

Determine the number of keys held by an Anim Curve.

Determine the time and value of individual keys, as well as the (angle,weight) or (x,y) values and type of key tangents. The in-tangent refers to the tangent entering the key. The out-tangent refers to the tangent leaving the key.

Find the index of the key at, or closest to a particular time.

Set the time and value of individual keys, as well as the type of the tangent to the curve entering (in-tangent) and leaving (out-tangent) the key, specify the tangent as either (angle,weight) or (x,y).

Add and remove keys from an Anim Curve. Anim Curves are implemented as Dependency Graph (DG) Nodes. Each Node can have indexed keys.

There are eight different types of Anim Curve nodes:

timeToAngular (animCurveTA)
timeToLinear (animCurveTL)
timeToTime (animCurveTT)
timeToUnitless (animCurveTU)
unitlessToAngular (animCurveUA)
unitlessToLinear (animCurveUL)
unitlessToTime (animCurveUT)
unitlessToUnitless (animCurveUU)

Specifying the correct AnimCurveType during creation will avoid implicit unit conversion nodes.

Use the Anim Curve Function Set to create Anim Curve Nodes and connect them to animatable attributes on DG Nodes, as well as to query and edit an Anim Curve Node and its keys.

On creation, an Anim Curve Function Set may be attached to a given Anim Curve or it may be unattached. The Function Set may be attached to a different Anim Curve Node using the setObject() methods inherited from the Base Function Set (MFnBase) or with the create() methods.

Use the create() methods of an Anim Curve Function Set to create a new Anim Curve Node, attach the Function Set to the new Node and connect the output of the Node to a specific animatable Attribute or Plug of another Node. Additionally, the output of an Anim Curve Node may be attached to an Attribute or Plug of another DG Node using the DG Modifier method MDGModifier::connect().

Use the evaluate() methods to determine the value of an Anim Curve at a particular time or a given unitless input.

Use the addKey() and remove() methods to add and remove keys to and from an Anim Curve.

The query and edit methods of the Anim Curve Function Set act on keys at a specific 0-based index. [Note that the numKeys() method returns a 1-based value]. Keys can be accessed either randomly (via a 0-based index) or serially (using the find() and findClosest() methods).

Use the find() or findClosest() methods to determine the index of a key at or closest to a specific time respectively.

Use the specific query methods to determine the time, value and tangent information for a key at a given index.

Use the specific edit methods to set the time, value and tangent information for a key at a given index.

There are methods for setting the x,y values for the in- and out-tangents, as well as setting their angles and weights.

Setting the time of a key will fail if the new time would require a re-ordering of the keys. Use the remove() and addKey() methods to re-order the keys. Or use the keyframe command from mel.

The Maya developer's kit ships with example code (animDemo) which demonstrates how to evaluate a Maya animation curve independent from Maya. The animation parameter curves in Maya are defined by a restricted set of cubic two-dimensional Bezier curves. It is defined by four points. P1 = (x1, y1) is the (key,value) pair for the first key. P2 = (x2, y2) is a point which defines the outgoing tangent direction at P1. P4 = (x4, y4) defines the second key and P3 = (x3, y3) is a point which defines the incoming tangent direction at P4. There are some basic restrictions for the x coordinates of these points: x1 <= x2 <= x3 <= x4.

The 2-dimensional Bezier curve is defined as

F(u) = [ u^3 u^2 u 1 ] * B * | P1 |   ,  0 <= u <= 1
                             | P2 |
                             | P3 |
                             | P4 |
     = [ B0(u) B1(u) B2(u) B3(u) ] * | x1 y1 |
                                     | x2 y2 |
                                     | x3 y3 |
                                     | x4 y4 |
 where B is the Bezier Basis matrix  | -1  3  -3  1 |
                                     |  3 -6   3  0 |
                                     | -3  3   0  0 |
                                     |  1  0   0  0 |

F(u) yields a vector of two cubic polynomials [ Fx(u) Fy(u) ] which define an (x, y) position on the parameter curve for some u in the range [0,1].

For an animation parameter curve, we are given the x position and want to know its corresponding y position. To do this we use x = Fx(u) and solve for u. Fx(u) is cubic and the restrictions on valid values for x2 and x3 guarantee there will be only one real root value for u. Once we know u, we can plug it into Fy(u) to get the y value.

One important note is how the outgoing and incoming tangents directions for a key are saved internally and in the Maya Ascii file format. Instead of being specified as points, the tangent directions are specified as vectors. The outgoing tangent direction at P1 is specified and saved as the vector 3*(P2 - P1) and the incoming tangent direction is specified and saved as the vector 3*(P4 - P3).

An animation curve is basically a restricted form of a bezier curve for which the keys serve as the control points and have tangent information embedded within them. There are two different methods for converting tangent information into the control points of the bezier hull and we have taken to calling the two methods weighted and non-weighted tangents.

The animation curve is evaluated in a piecewise manner, which means that each segment between two keys is evaluated on its own, without regards to any other segment. The only time keys outside of a segment are considered is when tangent values are calculated for the spline, clamped, plateau or auto tangent types.

When evaluating an animation curve, a two stage process is used:

the evaluation time is examined to determine if it falls within the range of the animation curve, and if it does not evaluation is based upon the infinity settings for the animation curve.
if the evaluation time falls within the range of the animation curve, the bezier parameters of the curve are computed and used as described below.

Animation curves may have either weighted or non-weighted tangents. With non-weighted tangents, tangents are implemented as vectors and P2 and P3 are internally adjusted to account for the time difference between P1 and P4.

When evaluating a time within a segment, the following algortithms are used:

For weighted tangents:
    where x is the start of the segment
    given the bezier x parameters a', b', c', d', find the parameter t
    which satisfies the formula:
        (time - x) = (t^3 * a') + (t^2 + b') + (t * c') + d'
    with t (and the bezier y parameters a, b, c, d) compute the value as:
        v = (t^3 * a) + (t^2 + b) + (t * c) + d
For non-weighted tangents:
    where x is the start of the segment
    compute the parameter t as time - x
    with t (and the bezier y parameters a, b, c, d) compute the value as:
        v = (t^3 * a) + (t^2 + b) + (t * c) + d

Examples:: animExportUtil/animExportUtil.cpp, animExportUtil/animFileExport.cpp, animImportExport/animFileUtils.cpp, atomImportExport/atomFileUtils.cpp, atomImportExport/atomFileUtils.h, createClipCmd/createClipCmd.cpp, interpPlugins/interpFlat.cpp, interpPlugins/interpHalf.cpp, and spiralAnimCurveCmd/spiralAnimCurveCmd.cpp.

Inheritance diagram for MFnAnimCurve:

Public Types
enum	AnimCurveType { kAnimCurveTA = 0, kAnimCurveTL, kAnimCurveTT, kAnimCurveTU, kAnimCurveUA, kAnimCurveUL, kAnimCurveUT, kAnimCurveUU, kAnimCurveUnknown }
	Defines the input and output type of the animation curve. More...

enum	TangentType { kTangentGlobal = 0, kTangentFixed, kTangentLinear, kTangentFlat, kTangentSmooth, kTangentStep, kTangentSlow, kTangentFast, kTangentClamped, kTangentPlateau, kTangentStepNext, kTangentAuto }
	Defines the type of the tangent. More...

enum	InfinityType { kConstant = 0, kLinear = 1, kCycle = 3, kCycleRelative = 4, kOscillate = 5 }
	Defines the type of the infinity. More...

Public Types inherited from MFnDependencyNode
enum	MAttrClass { kLocalDynamicAttr = 1, kNormalAttr, kExtensionAttr, kInvalidAttr }
	Specifies the scope of the attribute. More...

enum	MdgTimerState { kTimerOff, kTimerOn, kTimerUninitialized, kTimerInvalidState }
	Possible states for the node's timer. More...

enum	MdgTimerMetric { kTimerMetric_callback, kTimerMetric_compute, kTimerMetric_dirty, kTimerMetric_draw, kTimerMetric_fetch, kTimerMetric_callbackViaAPI, kTimerMetric_callbackNotViaAPI, kTimerMetric_computeDuringCallback, kTimerMetric_computeNotDuringCallback, kTimerMetrics }
	The different timer metrics which can be queried. More...

enum	MdgTimerType { kTimerType_self, kTimerType_inclusive, kTimerType_count, kTimerTypes }
	The types of timers which can be queried. More...

Public Member Functions
virtual MFn::Type	type () const
	Function set type. More...

virtual	~MFnAnimCurve ()
	Destructor.

	MFnAnimCurve ()
	Default constructor.

	MFnAnimCurve (MObject &object, MStatus *ReturnStatus=NULL)
	Constructor. More...

	MFnAnimCurve (const MPlug &plug, MStatus *ReturnStatus=NULL)
	Class constructor that initializes the function set to the single Anim Curve Node connected to the given MPlug. More...

MObject	create (const MObject &node, const MObject &attribute, MDGModifier modifier=NULL, MStatus ReturnStatus=NULL)
	Creates a new Anim Curve Node, attaches the Function Set to the new Node (detaching from the current Node) and connects the output of the new Anim Curve Node to an animatable Attribute on another DG Node. More...

MObject	create (const MObject &node, const MObject &attribute, AnimCurveType animCurveType, MDGModifier modifier=NULL, MStatus ReturnStatus=NULL)
	Creates a new Anim Curve Node, attaches the Function Set to the new Node (detaching from the current Node) and connects the output of the new Anim Curve Node to an animatable Attribute on another DG Node. More...

MObject	create (const MPlug &plug, MDGModifier modifier=NULL, MStatus ReturnStatus=NULL)
	Creates a new Anim Curve Node, attaches the Function Set to the new Node (detaching from the current Node) and connects the output of the new Anim Curve Node to the Plug on an animatable Attribute on another DG Node. More...

MObject	create (const MPlug &plug, AnimCurveType animCurveType, MDGModifier modifier=NULL, MStatus ReturnStatus=NULL)
	Creates a new Anim Curve Node, attaches the Function Set to the new Node (detaching from the current Node) and connects the output of the new Anim Curve Node to the Plug on an animatable Attribute on another DG Node. More...

MObject	create (AnimCurveType animCurveType, MDGModifier modifier=NULL, MStatus ReturnStatus=NULL)
	Creates a new Anim Curve Node, attaches the Function Set to the new Node (detaching from the current Node) but does not attempt to connect the new Anim Curve Node. More...

AnimCurveType	animCurveType (MStatus *ReturnStatus=NULL) const
	Returns the animCurve type. More...

AnimCurveType	timedAnimCurveTypeForPlug (MPlug &plug, MStatus *ReturnStatus=NULL) const
	Returns the timed animCurve type appropriate for the specified plug. More...

AnimCurveType	unitlessAnimCurveTypeForPlug (MPlug &plug, MStatus *ReturnStatus=NULL) const
	Returns the unitless animCurve type appropriate for the specified plug. More...

double	evaluate (const MTime &atTime, MStatus *ReturnStatus=NULL) const
	Determines the interpolated output value of Anim Curves of type kAnimCurveTA, kAnimCurveTL and kAnimCurveTU at the specified time. More...

MStatus	evaluate (const MTime &atTime, double &value) const
	Determines the interpolated output value of Anim Curves of type kAnimCurveTA, kAnimCurveTL and kAnimCurveTU at the specified time. More...

MStatus	evaluate (const MTime &atTime, MTime &timeValue) const
	Determines the interpolated output value of Anim Curves of type kAnimCurveTT at the specified time. More...

MStatus	evaluate (const double &atUnitlessInput, double &value) const
	Determines the interpolated output value of Anim Curves of type kAnimCurveUA, kAnimCurveUL and kAnimCurveUU at the specified unitless input. More...

MStatus	evaluate (const double &atUnitlessInput, MTime &timeValue) const
	Determines the interpolated output value of Anim Curves of type kAnimCurveUT at the specified unitless input. More...

bool	isStatic (MStatus *ReturnStatus=NULL) const
	Determines whether or not the animCurve is static. More...

unsigned int	numKeyframes (MStatus *ReturnStatus=NULL) const
	This method is obsolete. More...

unsigned int	numKeys (MStatus *ReturnStatus=NULL) const
	Determines the number of keys on the Anim Curve Node. More...

MStatus	remove (unsigned int index, MAnimCurveChange *change=NULL)
	Removes the key at the specified index. More...

MStatus	addKeyframe (const MTime &time, double value, MAnimCurveChange *change=NULL)
	Adds a new key with the given value at the specified time. More...

MStatus	addKeyframe (const MTime &time, double value, TangentType tangentInType, TangentType tangentOutType, MAnimCurveChange *change=NULL)
	Adds a new key with the given value and tangent types at the specified time. More...

unsigned int	addKey (const MTime &time, double value, TangentType tangentInType=kTangentGlobal, TangentType tangentOutType=kTangentGlobal, MAnimCurveChange change=NULL, MStatus ReturnStatus=NULL)
	Adds a new key with the given value and tangent types at the specified time for curves of type kAnimCurveTA, kAnimCurveTL and kAnimCurveTU. More...

unsigned int	addKey (const MTime &timeInput, const MTime &timeValue, TangentType tangentInType=kTangentGlobal, TangentType tangentOutType=kTangentGlobal, MAnimCurveChange change=NULL, MStatus ReturnStatus=NULL)
	Adds a new key with the given output time value and tangent types at the specified input time for curves of type kAnimCurveTT. More...

unsigned int	addKey (double unitlessInput, double value, TangentType tangentInType=kTangentGlobal, TangentType tangentOutType=kTangentGlobal, MAnimCurveChange change=NULL, MStatus ReturnStatus=NULL)
	Adds a new key with the given value and tangent types at the specified unitless input for curves of type kAnimCurveUA, kAnimCurveUL and kAnimCurveUU. More...

unsigned int	addKey (double unitlessInput, const MTime &time, TangentType tangentInType=kTangentGlobal, TangentType tangentOutType=kTangentGlobal, MAnimCurveChange change=NULL, MStatus ReturnStatus=NULL)
	Adds a new key with the given output time value and tangent types at the specified unitless input for curves of type kAnimCurveUT. More...

MStatus	addKeys (MTimeArray timeArray, MDoubleArray valueArray, TangentType tangentInType=kTangentGlobal, TangentType tangentOutType=kTangentGlobal, bool keepExistingKeys=false, MAnimCurveChange *change=NULL)
	Add a set of new keys with the given corresponding values and tangent types at the specified times. More...

bool	find (const MTime &time, unsigned int &index, MStatus *ReturnStatus=NULL) const
	Determines the index of the key which is set at the specified time. More...

bool	find (double unitlessInput, unsigned int &index, MStatus *ReturnStatus=NULL) const
	Determines the index of the key which is set at the specified unitless input value. More...

unsigned int	findClosest (const MTime &time, MStatus *ReturnStatus=NULL) const
	Determines the index of the key which is set at the time closest to the specified time. More...

unsigned int	findClosest (double unitlessInput, MStatus *ReturnStatus=NULL) const
	Determines the index of the key which is set at the time closest to the specified unitless input value. More...

MTime	time (unsigned int index, MStatus *ReturnStatus=NULL) const
	Determines the time of the key at the specified index. More...

double	value (unsigned int index, MStatus *ReturnStatus=NULL) const
	Determines the value of the key at the specified index. More...

double	unitlessInput (unsigned int index, MStatus *ReturnStatus=NULL) const
	Determines the unitless input value of the key at the specified index. More...

MStatus	setValue (unsigned int index, double value, MAnimCurveChange *change=NULL)
	Sets the value of the key at the specified index. More...

MStatus	setTime (unsigned int index, const MTime &time, MAnimCurveChange *change=NULL)
	Sets the time of the key at the specified index. More...

MStatus	setUnitlessInput (unsigned int index, double unitlessInput, MAnimCurveChange *change=NULL)
	Sets the value of the unitless input of the key at the specified index. More...

bool	isTimeInput (MStatus *ReturnStatus=NULL) const
	Determines the input type of the animCurve. More...

bool	isUnitlessInput (MStatus *ReturnStatus=NULL) const
	Determines the input type of the animCurve. More...

TangentType	inTangentType (unsigned int index, MStatus *ReturnStatus=NULL) const
	Determines the type of the tangent to the curve entering the current key. More...

TangentType	outTangentType (unsigned int index, MStatus *ReturnStatus=NULL) const
	Determines the type of the tangent to the curve leaving the current key. More...

MStatus	setInTangentType (unsigned int index, TangentType tangentType, MAnimCurveChange *change=NULL)
	Sets the type of the tangent to the curve entering the key at the specified index. More...

MStatus	setOutTangentType (unsigned int index, TangentType tangentType, MAnimCurveChange *change=NULL)
	Sets the type of the tangent to the curve leaving the key at the specified index. More...

MStatus	setTangentTypes (MIntArray indexArray, TangentType tangentInType=kTangentGlobal, TangentType tangentOutType=kTangentGlobal, MAnimCurveChange *change=NULL)
	Sets the tangent types for multiple keys. More...

MStatus	getTangent (unsigned int index, float &x, float &y, bool inTangent) const
	Determines the x,y value representing the vector of the in- or out-tangent (depending on the value of the inTangent parameter) to the curve for the key at the specified index. More...

MStatus	getTangent (unsigned int index, MAngle &angle, double &weight, bool inTangent) const
	Determines the angle and weight of the in- or out-tangent to the curve for the key at the specified index. More...

MStatus	setTangent (unsigned int index, float x, float y, bool inTangent, MAnimCurveChange *change=NULL, bool convertUnits=true)
	Sets the tangent for the key at the specified index. More...

MStatus	setTangent (unsigned int index, const MAngle &angle, double weight, bool inTangent, MAnimCurveChange *change=NULL, bool convertUnits=true)
	Sets the tangent for the key at the specified index. More...

MStatus	setAngle (unsigned int index, const MAngle &angle, bool inTangent, MAnimCurveChange *change=NULL)
	Set the in- or out-angle of the tangent for the key at the given index. More...

MStatus	setWeight (unsigned int index, double weight, bool inTangent, MAnimCurveChange *change=NULL)
	Set the in- or out-weight of the tangent for the key at the given index. More...

bool	weightsLocked (unsigned int index, MStatus *ReturnStatus=NULL) const
	Determines whether the weights are locked at the given key. More...

bool	tangentsLocked (unsigned int index, MStatus *ReturnStatus=NULL) const
	Determines whether the tangents are locked at the given key. More...

MStatus	setWeightsLocked (unsigned int index, bool locked, MAnimCurveChange *change=NULL)
	Lock or unlock the weights at the given key. More...

MStatus	setTangentsLocked (unsigned int index, bool locked, MAnimCurveChange *change=NULL)
	Lock or unlock the tangents at the given key. More...

InfinityType	preInfinityType (MStatus *ReturnStatus=NULL) const
	Determines the behaviour of the curve for the range occurring before the first key. More...

InfinityType	postInfinityType (MStatus *ReturnStatus=NULL) const
	Determines the behaviour of the curve for the range occurring after the last key. More...

MStatus	setPreInfinityType (InfinityType infinityType, MAnimCurveChange *change=NULL)
	Set the behaviour of the curve for the range occurring before the first key. More...

MStatus	setPostInfinityType (InfinityType infinityType, MAnimCurveChange *change=NULL)
	Set the behaviour of the curve for the range occurring after the last key. More...

bool	isWeighted (MStatus *ReturnStatus=NULL) const
	Determines whether or not the curve has weighted tangents. More...

MStatus	setIsWeighted (bool isWeighted, MAnimCurveChange *change=NULL)
	Sets whether or not the curve has weighted tangents. More...

bool	isBreakdown (unsigned int index, MStatus *ReturnStatus=NULL) const
	Determines whether or not a key is a breakdown. More...

MStatus	setIsBreakdown (unsigned int index, bool isBreakdown, MAnimCurveChange *change=NULL)
	Sets the breakdown state of a key at a given index. More...

	MFnAnimCurve (const MObject &object, MStatus *ReturnStatus=NULL)
	Constructor. More...

Public Member Functions inherited from MFnDependencyNode
virtual	~MFnDependencyNode ()
	Destructor.

	MFnDependencyNode ()
	Default constructor.

	MFnDependencyNode (MObject &object, MStatus *ReturnStatus=NULL)
	Constructor. More...

MObject	create (const MTypeId &typeId, MStatus *ReturnStatus=NULL)
	Creates a new dependency node with the given type tag. More...

MObject	create (const MTypeId &typeId, const MString &name, MStatus *ReturnStatus=NULL)
	Creates a new dependency node with the given type tag. More...

MObject	create (const MString &type, MStatus *ReturnStatus=NULL)
	Creates a new dependency node with the given type. More...

MObject	create (const MString &type, const MString &name, MStatus *ReturnStatus=NULL)
	Creates a new dependency node with the given type. More...

MTypeId	typeId (MStatus *ReturnStatus=NULL) const
	Returns the type id of this node. More...

MString	typeName (MStatus *ReturnStatus=NULL) const
	Returns the type name of this node. More...

MString	name (MStatus *ReturnStatus=NULL) const
	Returns the name of this node. More...

MString	absoluteName (MStatus *ReturnStatus=NULL) const
	Returns the absolute name of this node. More...

MString	pluginName (MStatus *ReturnStatus=NULL) const
	Returns the name of the plug-in this MFnDependendencyNode was defined in. More...

MString	setName (const MString &name, bool createNamespace=false, MStatus *ReturnStatus=NULL)
	Sets the name of this node. More...

MUuid	uuid (MStatus *ReturnStatus=NULL) const
	Returns the node's UUID. More...

void	setUuid (const MUuid &uuid, MStatus *ReturnStatus=NULL)
	Sets the node's UUID. More...

MStatus	getConnections (MPlugArray &array) const
	Get all of the current connections to this node as an array of plugs. More...

unsigned int	attributeCount (MStatus *ReturnStatus=NULL) const
	Returns the number of attributes that this node has. More...

MObject	attribute (unsigned int index, MStatus *ReturnStatus=NULL) const
	Finds the attribute of this node at the given index. More...

MObject	reorderedAttribute (unsigned int index, MStatus *ReturnStatus=NULL) const
	Some nodes, such as the various animCurve nodes, require that their attributes be set in a specific order for proper operation. More...

MObject	attribute (const MString &attrName, MStatus *ReturnStatus=NULL) const
	Finds the attribute of this node that has the given name. More...

MAttrClass	attributeClass (const MObject &attr, MStatus *ReturnStatus=NULL) const
	Returns the class (normal, dynamic, extension) of the specified attribute. More...

MStatus	getAffectedAttributes (const MObject &attr, MObjectArray &affectedAttributes) const
	Returns an array of attributes that are affected by the attribute passed in. More...

MStatus	getAffectedByAttributes (const MObject &attr, MObjectArray &affectedByAttributes) const
	Returns an array of attributes that affect the attribute passed in, attr. More...

MPlug	findPlug (const MObject &attr, bool wantNetworkedPlug, MStatus *ReturnStatus=NULL) const
	Attempt to find a plug for the given attribute. More...

MPlug	findPlug (const MString &attrName, bool wantNetworkedPlug, MStatus *ReturnStatus=NULL) const
	Attempt to find a plug for the given attribute. More...

MPlug	findPlug (const MObject &attr, MStatus *ReturnStatus=NULL) const
	This method is obsolete. More...

MPlug	findPlug (const MString &attrName, MStatus *ReturnStatus=NULL) const
	This method is obsolete. More...

MStatus	addAttribute (const MObject &attr)
	Add a new dynamic attibute to this node. More...

MStatus	removeAttribute (const MObject &attr)
	Remove a dynamic attribute from a node. More...

MPxNode *	userNode (MStatus *ReturnStatus=NULL) const
	If the function set's node is a plug-in node, then this method will extract the MPxNode pointer from it. More...

bool	isFromReferencedFile (MStatus *ReturnStatus=NULL) const
	Indicates whether or not this node came from a referenced file. More...

bool	isShared (MStatus *ReturnStatus=NULL) const
	Indicates whether or not this node is shared. More...

bool	isTrackingEdits (MStatus *ReturnStatus=NULL) const
	Returns whether or not edits on the given node are being tracked by the generalized edit system. More...

bool	hasUniqueName (MStatus *ReturnStatus=NULL) const
	Indicates whether or not this node's name is unique within the scene. More...

MString	parentNamespace (MStatus *ReturnStatus=NULL) const
	Returns the name of the namespace in which this node resides. More...

bool	isLocked (MStatus *ReturnStatus=NULL) const
	Indicates whether or not this node is locked. More...

MStatus	setLocked (bool locked)
	Locks or unlocks this node. More...

bool	isNewAttribute (const MObject &attr, MStatus *ReturnStatus=NULL) const
	Indicates whether or not the specified attribute was added to this node within the current scene. More...

MStatus	setFlag (unsigned int flag, bool state)
	Sets the state of the specified flag for the node. More...

bool	isFlagSet (unsigned int flag, MStatus *ReturnStatus=NULL) const
	Retrieves the current state of the specified flag for a node. More...

bool	isDefaultNode (MStatus *ReturnStatus=NULL) const
	Returns true if the node is a default node. More...

MStatus	setDoNotWrite (bool flag)
	Use this method to mark the "do not write" state of this node. More...

bool	canBeWritten (MStatus *ReturnStatus=NULL) const
	Returns the do not write state of the node. More...

bool	hasAttribute (const MString &name, MStatus *ReturnStatus=NULL) const
	Returns true if the node already has an attribute with the given name. More...

MObject	getAliasAttr (bool force, MStatus *ReturnStatus=NULL)
	Returns the node's alias attribute, which is a special attribute used to store information about the node's attribute aliases. More...

bool	setAlias (const MString &alias, const MString &name, const MPlug &plug, bool add=true, MStatus *ReturnStatus=NULL)
	Sets or removes an alias (i.e. More...

bool	findAlias (const MString &alias, MObject &attrObj, MStatus *ReturnStatus=NULL) const
	Retrieves the attribute with the given alias. More...

bool	getAliasList (MStringArray &strArray, MStatus *ReturnStatus=NULL)
	Returns a list of all attribute aliases for this node. More...

MString	plugsAlias (const MPlug &plug, MStatus *ReturnStatus=NULL)
	Returns the alias for the plug's attribute or the empty string if that attribute has no alias. More...

MStatus	setIcon (const MString &filename)
	Associates a custom icon with the node for display in the Maya UI. More...

MString	icon (MStatus *ReturnStatus=NULL) const
	Returns the custom icon filename associated with the node. More...

MStatus	getExternalContent (MExternalContentInfoTable &table) const
	Returns the external content (files) that this node depends on. More...

MStatus	addExternalContentForFileAttr (MExternalContentInfoTable &table, const MObject &attr) const
	Adds content info to the specified table from a file path attribute. More...

MStatus	setExternalContentForFileAttr (const MObject &attr, const MExternalContentLocationTable &table)
	Sets content info in the specified attribute from the table. More...

MStatus	setExternalContent (const MExternalContentLocationTable &table)
	Changes the location of external content. More...

MString	setName (const MString &name, MStatus *ReturnStatus)
	OBSOLETE FUNCTION, NO SCRIPT SUPPORT. More...

	MFnDependencyNode (const MObject &object, MStatus *ReturnStatus=NULL)
	NO SCRIPT SUPPORT. More...

bool	getPlugsAlias (const MPlug &plug, MString &aliasName, MStatus *ReturnStatus=NULL)
	NO SCRIPT SUPPORT. More...

virtual const adsk::Data::Associations *	metadata (MStatus *ReturnStatus=NULL) const
	This method is not available in Python. More...

virtual MStatus	setMetadata (const adsk::Data::Associations &)
	This method is not available in Python. More...

virtual MStatus	deleteMetadata ()
	This method is not available in Python. More...

virtual MStatus	validateMetadata (MString &errors) const
	This method is not available in Python. More...

MStatus	dgTimerOn ()
	Indicates that this node should collect DG timing data whenever DG timing is enabled. More...

MStatus	dgTimerOff ()
	Indicates that this node should no longer collect DG timing data when DG timing is enabled. More...

MdgTimerState	dgTimerQueryState (MStatus *ReturnStatus=NULL)
	The function returns the current on/off state of the node's timer. More...

MStatus	dgTimerReset ()
	The function resets the dependency graph timers and counters for this node to zero. More...

double	dgTimer (const MdgTimerMetric timerMetric, const MdgTimerType timerType, MStatus *ReturnStatus=NULL) const
	The function returns the specified timer value for the current node. More...

MStatus	dgCallbacks (const MdgTimerType type, MStringArray &callbackName, MDoubleArray &value)
	Node callbacks that occur when timing is enabled get logged with the node and can be queried via this method. More...

MStatus	dgCallbackIds (const MdgTimerType type, const MString &callbackName, MCallbackIdArray &callbackId, MDoubleArray &value)
	This method provides a further breakdown of the per-callback time returned via dgCallbacks() by returning the data on a per-callbackId basis. More...

MStatus	addAttribute (const MObject &attr, MAttrClass type)
	This method is obsolete. More...

MStatus	removeAttribute (const MObject &attr, MAttrClass type)
	This method is obsolete. More...

Public Member Functions inherited from MFnBase
virtual	~MFnBase ()
	Class Destructor. More...

bool	hasObj (MFn::Type) const
	Determines whether or not the Function Set is compatible with the specified Maya Object within the API RTTI system. More...

bool	hasObj (const MObject &) const
	Determines whether or not the Function Set is compatible with the specified Maya Object within the API RTTI system. More...

MObject	object (MStatus *ReturnStatus=NULL) const
	Returns the MObject that is attached to the Function Set. More...

virtual MStatus	setObject (MObject &object)
	Attaches the Function Set to the specified Maya Object. More...

virtual MStatus	setObject (const MObject &object)
	NO SCRIPT SUPPORT. More...

Protected Member Functions
virtual const char *	className () const
	Class name. More...

Additional Inherited Members
Static Public Member Functions inherited from MFnDependencyNode
static MString	classification (const MString &nodeTypeName)
	Retrieves the classification string for a node type. More...

static unsigned int	allocateFlag (const MString pluginName, MStatus *ReturnStatus=NULL)
	Allocates a node flag for sole use by the caller. More...

static MStatus	deallocateFlag (const MString pluginName, unsigned int flag)
	Deallocates a node flag which was previously allocated by a call to allocateFlag. More...

static MStatus	deallocateAllFlags (const MString pluginName)
	Deallocates all of the node flags which are currently allocated to the specified plugin. More...

static void	enableDGTiming (bool enable)
	Globally enables or disables the DG node timing mechanism. More...

Static Public Member Functions inherited from MFnBase
static const char *	className ()
	Returns the name of this class. More...

Member Enumeration Documentation

enum AnimCurveType

Defines the input and output type of the animation curve.

Animation curves in Maya support either time or unitless inputs. For example, curves set using setKeyframe have time inputs. Curves set using setDrivenKeyframe have unitless inputs. Maya supports four types of outputs: angular, linear, time and unitless. Time, angular and linear outputs work according to the units specified in user preferences and convert units when the preferences are changes. Unitless outputs are not sensitive to user preferences.

Enumerator
kAnimCurveTA	Time to Angular.
kAnimCurveTL	Time to Linear.
kAnimCurveTT	Time to Time.
kAnimCurveTU	Time to Unitless.
kAnimCurveUA	Unitless to Angular.
kAnimCurveUL	Unitless to Linear.
kAnimCurveUT	Unitless to Time.
kAnimCurveUU	Unitless to Unitless.
kAnimCurveUnknown	Unknown type.

enum TangentType

Defines the type of the tangent.

Enumerator
kTangentGlobal	Global.
kTangentFixed	Fixed.
kTangentLinear	Linear.
kTangentFlat	Flag.
kTangentSmooth	Smooth.
kTangentStep	Step.
kTangentSlow	OBSOLETE kTangentSlow should not be used. Using this tangent type may produce unwanted and unexpected results.
kTangentFast	OBSOLETE kTangentFast should not be used. Using this tangent type may produce unwanted and unexpected results.
kTangentClamped	Clamped.
kTangentPlateau	Plateau.
kTangentStepNext	StepNext.
kTangentAuto	Auto.

enum InfinityType

Defines the type of the infinity.

The infinity controls the shape of the animation curve in the regions before the first key and after the last key.

Enumerator
kConstant	Constant.
kLinear	Linear.
kCycle	Cycle.
kCycleRelative	Cycle relative.
kOscillate	Oscillate.

Constructor & Destructor Documentation

MFnAnimCurve	(	MObject &	object,
		MStatus *	ReturnStatus = `NULL`
	)

Constructor.

Class constructor that initializes the function set to the given MObject.

Parameters

[in]	object	The MObject to attach the function set to
[out]	ReturnStatus	the return status

Status Codes:

MS::kSuccess if the function set is successfully attached
MS::kInvalidParameter if the MObject does not represent a valid Maya object or if the function set is not allowed to attach to this MObject

MFnAnimCurve	(	const MPlug &	plug,
		MStatus *	ReturnStatus = `NULL`
	)

Class constructor that initializes the function set to the single Anim Curve Node connected to the given MPlug.

It is possible for a plug to be connected to more than one Anim Curve Node (for example the plug may be connected to a choice node and then several Anim Curves may be connected to the choice node). In this case the function set will attach to one of the Anim Curve Nodes and return MS::kNotImplemented.

Parameters

[in]	plug	the MPlug to find a single Anim Curve Node
[out]	ReturnStatus	the return status

Status Codes:

MS::kSuccess if the function set is successfully attached
MS::kInvalidParameter if the MPlug does not represent a valid Maya object or if the function set is not allowed to attach to the Anim Curve Node
MS::kNotFound if the MPlug is not connected to an Anim Curve Node
MS::kNotImplemented if the MPlug is connected to more than one Anim Curve Node. The function set will be attached to one of the Anim Curve Nodes.

MFnAnimCurve	(	const MObject &	object,
		MStatus *	ReturnStatus = `NULL`
	)

Constructor.

Class constructor that initializes the function set to the given MObject.

Parameters

[in]	object	The MObject to attach the function set to
[out]	ReturnStatus	the return status

Status Codes:

MS::kSuccess if the function set is successfully attached
MS::kInvalidParameter if the MObject does not represent a valid Maya object or if the function set is not allowed to attach to this MObject

Member Function Documentation

MFn::Type type ( ) const

virtual

Function set type.

Return the class type : MFn::kAnimCurve.

Reimplemented from MFnDependencyNode.

const char * className ( ) const

protectedvirtual

Class name.

Return the class name : "MFnAnimCurve".

Reimplemented from MFnDependencyNode.

MObject create	(	const MObject &	node,
		const MObject &	attribute,
		MDGModifier *	modifier = `NULL`,
		MStatus *	ReturnStatus = `NULL`
	)

Creates a new Anim Curve Node, attaches the Function Set to the new Node (detaching from the current Node) and connects the output of the new Anim Curve Node to an animatable Attribute on another DG Node.

This method will fail if the target Attribute is not animatable, or if a connection to the target Attribute already exists.

Once the new Anim Curve Node has been created, the create() method finds the Plug associated with the target Attribute, makes sure the Attribute is animatable and then makes the connection.

The creation and connection of DG Nodes are DG operations. Operations on the DG are performed by DG Modifiers (MDGModifier). A DG Modifier provides methods for editing the DG, however, the operations are not performed immediately. DG operations must be undoable, therefore, the DG Modifier maintains a queue of pending DG operations which are performed when the MDGModifer::doIt() method is invoked. Subsequently, the queue of DG operations becomes the undo queue. When the MDGModifier::undoIt() method is invoked all of the operations on the queue are undone. DG operations on the queue can be done and undone as often as required as long as the Modifier exists and no other changes to the DG make the operations invalid. Once the Modifier holding the queue is destroyed, the queue is lost.

If a DG Modifier is passed as a parameter to this create() method, then that Modifier will be invoked to perform the creation and connection operations. At the completion of the create() method, the Modifier holds the necessary information to undo the operations, therefore, the caller of the create() method can undo the creation and connection if necessary.

If no Modifier is passed in, the create() method instantiates its own Modifier, uses it to perform the DG operations and then destroys the Modifier. The creation and connection, in this case, are not undoable by the caller.

Parameters

[in]	node	DG Node to which the output of the new Anim Curve Node is to be connected
[in]	attribute	Attribute on the given node to which the output of the new Anim Curve Node is to be connected
[in]	modifier	Modifier to be used so undo capability is retained by caller
[in]	ReturnStatus	Status Code

Returns: The new Anim Curve Node

Status Codes:

MS::kSuccess Success
MS::kInvalidParameter Invalid parameter passed for node and/or attribute - Node and/or Attribute inaccessible or non-existent, Attribute already connected as destination (fan-in not allowed), or Attribute is not animatable.

MS::kInsufficientMemory Insufficient memory to create new Node or temporary DG Modifier
MS::kLicenseFailure Application not licensed for attempted operation
MS::kFailure Could not modify DG

Examples:: animImportExport/animFileUtils.cpp, atomImportExport/atomFileUtils.cpp, createClipCmd/createClipCmd.cpp, and spiralAnimCurveCmd/spiralAnimCurveCmd.cpp.

MObject create	(	const MObject &	node,
		const MObject &	attribute,
		AnimCurveType	animCurveType,
		MDGModifier *	modifier = `NULL`,
		MStatus *	ReturnStatus = `NULL`
	)

Creates a new Anim Curve Node, attaches the Function Set to the new Node (detaching from the current Node) and connects the output of the new Anim Curve Node to an animatable Attribute on another DG Node.

This method will fail if the target Attribute is not animatable, or if a connection to the target Attribute already exists.

Once the new Anim Curve Node has been created, the create() method finds the Plug associated with the target Attribute, makes sure the Attribute is animatable and then makes the connection.

The creation and connection of DG Nodes are DG operations. Operations on the DG are performed by DG Modifiers (MDGModifier). A DG Modifier provides methods for editing the DG, however, the operations are not performed immediately. DG operations must be undoable, therefore, the DG Modifier maintains a queue of pending DG operations which are performed when the MDGModifer::doIt() method is invoked. Subsequently, the queue of DG operations becomes the undo queue. When the MDGModifier::undoIt() method is invoked all of the operations on the queue are undone. DG operations on the queue can be done and undone as often as required as long as the Modifier exists and no other changes to the DG make the operations invalid. Once the Modifier holding the queue is destroyed, the queue is lost.

If a DG Modifier is passed as a parameter to this create() method, then that Modifier will be invoked to perform the creation and connection operations. At the completion of the create() method, the Modifier holds the necessary information to undo the operations, therefore, the caller of the create() method can undo the creation and connection if necessary.

If no Modifier is passed in, the create() method instantiates its own Modifier, uses it to perform the DG operations and then destroys the Modifier. The creation and connection, in this case, are not undoable by the caller.

Parameters

[in]	node	DG Node to which the output of the new Anim Curve Node is to be connected
[in]	attribute	Attribute on the given node to which the output of the new Anim Curve Node is to be connected
[in]	animCurveType	The animCurve Type to be created
[in]	modifier	Modifier to be used so undo capability is retained by caller
[out]	ReturnStatus	Status Code

Returns: The new Anim Curve Node

Status Codes:

MS::kSuccess Success
MS::kInvalidParameter Invalid parameter passed for node and/or attribute - Node and/or Attribute inaccessible or non-existent, Attribute already connected as destination (fan-in not allowed), or Attribute is not animatable.

MS::kInsufficientMemory Insufficient memory to create new Node or temporary DG Modifier
MS::kLicenseFailure Application not licensed for attempted operation
MS::kFailure Could not modify DG

MObject create	(	const MPlug &	plug,
		MDGModifier *	modifier = `NULL`,
		MStatus *	ReturnStatus = `NULL`
	)

Creates a new Anim Curve Node, attaches the Function Set to the new Node (detaching from the current Node) and connects the output of the new Anim Curve Node to the Plug on an animatable Attribute on another DG Node.

This method will fail if the target Attribute is not animatable, or if a connection to the target Attribute already exists.

If a DG Modifier is passed as a parameter to this create() method, then that Modifier will be invoked to perform the creation and connection operations. At the completion of the create() method, the Modifier holds the necessary information to undo the operations, therefore, the caller of the create() method can undo the creation and connection if necessary.

If no Modifier is passed in, the create() method instantiates its own Modifier, uses it to perform the DG operations and then destroys the Modifier. The creation and connection, in this case, are not undoable by the caller.

Parameters

[in]	plug	Plug to which the output of the new Anim Curve Node is to be connected
[in]	modifier	Modifier to be used so undo capability is retained by caller
[out]	ReturnStatus	Status Code

Returns: The new Anim Curve Node

Status Codes:

MS::kSuccess Success
MS::kInvalidParameter Invalid parameter passed for plug - Attribute already connected as destination (fan-in not allowed), or Attribute is not animatable.

MS::kInsufficientMemory Insufficient memory to create new Node or temporary DG Modifier
MS::kLicenseFailure Application not licensed for attempted operation
MS::kFailure Could not modify DG

MObject create	(	const MPlug &	plug,
		AnimCurveType	animCurveType,
		MDGModifier *	modifier = `NULL`,
		MStatus *	ReturnStatus = `NULL`
	)

Creates a new Anim Curve Node, attaches the Function Set to the new Node (detaching from the current Node) and connects the output of the new Anim Curve Node to the Plug on an animatable Attribute on another DG Node.

This method will fail if the target Attribute is not animatable, or if a connection to the target Attribute already exists.

If a DG Modifier is passed as a parameter to this create() method, then that Modifier will be invoked to perform the creation and connection operations. At the completion of the create() method, the Modifier holds the necessary information to undo the operations, therefore, the caller of the create() method can undo the creation and connection if necessary.

If no Modifier is passed in, the create() method instantiates its own Modifier, uses it to perform the DG operations and then destroys the Modifier. The creation and connection, in this case, are not undoable by the caller.

Parameters

[in]	plug	Plug to which the output of the new Anim Curve Node is to be connected
[in]	animCurveType	The animCurve type to be created
[in]	modifier	Modifier to be used so undo capability is retained by caller
[out]	ReturnStatus	Status Code

Returns: The new Anim Curve Node

Status Codes:

MS::kSuccess Success
MS::kInvalidParameter Invalid parameter passed for plug - Attribute already connected as destination (fan-in not allowed), or Attribute is not animatable.

MS::kInsufficientMemory Insufficient memory to create new Node or temporary DG Modifier
MS::kLicenseFailure Application not licensed for attempted operation
MS::kFailure Could not modify DG

MObject create	(	AnimCurveType	animCurveType,
		MDGModifier *	modifier = `NULL`,
		MStatus *	ReturnStatus = `NULL`
	)

Creates a new Anim Curve Node, attaches the Function Set to the new Node (detaching from the current Node) but does not attempt to connect the new Anim Curve Node.

If a DG Modifier is passed as a parameter to this create() method, then that Modifier will be invoked to perform the creation and connection operations. At the completion of the create() method, the Modifier holds the necessary information to undo the operations, therefore, the caller of the create() method can undo the creation and connection if necessary.

If no Modifier is passed in, the create() method instantiates its own Modifier, uses it to perform the DG operations and then destroys the Modifier. The creation and connection, in this case, are not undoable by the caller.

Parameters

[in]	animCurveType	The type of Anim Curve to be created
[in]	modifier	Modifier to be used so undo capability is retained by caller
[out]	ReturnStatus	Status Code

Returns: The new Anim Curve Node

Status Codes:

MS::kSuccess Success
MS::kInsufficientMemory Insufficient memory to create new Node or temporary DG Modifier
MS::kLicenseFailure Application not licensed for attempted operation
MS::kFailure Could not modify DG

MFnAnimCurve::AnimCurveType animCurveType ( MStatus * ReturnStatus = NULL ) const

Returns the animCurve type.

Parameters

[out] ReturnStatus Status Code

Returns: The animCurve type.

Status Codes:

MS::kSuccess the animCurve type was returned successfully
MS::kFailure the animCurve type was not returned successfully

Examples:: atomImportExport/atomFileUtils.cpp.

MFnAnimCurve::AnimCurveType timedAnimCurveTypeForPlug	(	MPlug &	plug,
		MStatus *	ReturnStatus = `NULL`
	)		const

Returns the timed animCurve type appropriate for the specified plug.

Parameters

[in]	plug	plug
[out]	ReturnStatus	Status Code

Returns: The animCurve type.

Status Codes:

MS::kSuccess the animCurve type was returned successfully
MS::kFailure the animCurve type was not returned successfully

Examples:: atomImportExport/atomFileUtils.cpp.

MFnAnimCurve::AnimCurveType unitlessAnimCurveTypeForPlug	(	MPlug &	plug,
		MStatus *	ReturnStatus = `NULL`
	)		const

Returns the unitless animCurve type appropriate for the specified plug.

Parameters

[in]	plug	plug
[out]	ReturnStatus	Status Code

Returns: The animCurve type.

Status Codes:

MS::kSuccess the animCurve type was returned successfully
MS::kFailure the animCurve type was not returned successfully

double evaluate	(	const MTime &	atTime,
		MStatus *	ReturnStatus = `NULL`
	)		const

Determines the interpolated output value of Anim Curves of type kAnimCurveTA, kAnimCurveTL and kAnimCurveTU at the specified time.

Parameters

[in]	atTime	Time at which the Anim Curve is to be evaluated
[out]	ReturnStatus	Status Code .

Returns: Interpolated value of Anim Curve at specified time

Status Codes:

MS::kSuccess Success
MS::kFailure Failure querying Node - Node does not exist or is not accessible

Examples:: atomImportExport/atomFileUtils.cpp.

MStatus evaluate	(	const MTime &	atTime,
		double &	value
	)		const

Determines the interpolated output value of Anim Curves of type kAnimCurveTA, kAnimCurveTL and kAnimCurveTU at the specified time.

Parameters

[in]	atTime	Time at which the Anim Curve is to be evaluated
[out]	value	Interpolated value of Anim Curve at specified time

Returns: Status Code

Status Codes:

MS::kSuccess Success
MS::kFailure Failure querying Node - Node does not exist or is not accessible

MStatus evaluate	(	const MTime &	atTime,
		MTime &	timeValue
	)		const

Determines the interpolated output value of Anim Curves of type kAnimCurveTT at the specified time.

Parameters

[in]	atTime	Time at which the Anim Curve is to be evaluated
[out]	timeValue	Interpolated output time of Anim Curve at specified time

Returns: Status Code

Status Codes:

MS::kSuccess Success
MS::kFailure Failure querying Node - Node does not exist or is not accessible

MStatus evaluate	(	const double &	atUnitlessInput,
		double &	value
	)		const

Determines the interpolated output value of Anim Curves of type kAnimCurveUA, kAnimCurveUL and kAnimCurveUU at the specified unitless input.

Parameters

[in]	atUnitlessInput	Input value at which the Anim Curve is to be evaluated
[out]	value	Interpolated output value of Anim Curve at specified input value

Returns: Status Code

Status Codes:

MS::kSuccess Success
MS::kFailure Failure querying Node - Node does not exist or is not accessible

MStatus evaluate	(	const double &	atUnitlessInput,
		MTime &	timeValue
	)		const

Determines the interpolated output value of Anim Curves of type kAnimCurveUT at the specified unitless input.

Parameters

[in]	atUnitlessInput	Input value at which the Anim Curve is to be evaluated
[out]	timeValue	Interpolated output time of Anim Curve at specified time

Returns: Status Code

Status Codes:

MS::kSuccess Success
MS::kFailure Failure querying Node - Node does not exist or is not accessible

bool isStatic ( MStatus * ReturnStatus = NULL ) const

Determines whether or not the animCurve is static.

The animCurve is considered to be static if it would return the same value regardless of the evaluation time. This basically means that the values of all the keys are the same and the y component of all the tangents is 0.

Parameters

[out] ReturnStatus Status Code .

Returns: Boolean value: true if the curve is static, false otherwise

Status Codes:

MS::kSuccess Success
MS::kFailure Failure querying Node - Node does not exist or is not accessible

unsigned int numKeyframes ( MStatus * ReturnStatus = NULL ) const

This method is obsolete.

Deprecated:: Use MFnAnimCurve::numKeys instead.

Parameters

[out] ReturnStatus Status Code

Returns: Number of keys on the Anim Curve Node

Examples:: animImportExport/animFileUtils.cpp, and atomImportExport/atomFileUtils.cpp.

unsigned int numKeys ( MStatus * ReturnStatus = NULL ) const

Determines the number of keys on the Anim Curve Node.

Parameters

[out] ReturnStatus Status Code

Returns: Number of keys on the Anim Curve Node

Status Codes:

MS::kSuccess Success
MS::kFailure Failure querying Node - Node does not exist or is not accessible

Examples:: atomImportExport/atomFileUtils.cpp.

MStatus remove	(	unsigned int	index,
		MAnimCurveChange *	change = `NULL`
	)

Removes the key at the specified index.

If this method is called from within an MItKeyframe iterator, the results are undefined (i.e., it is likely that the incorrect key will be removed). This is because keys are automatically sorted (i.e., assigned new index values) everytime time they are modified in such a manner that could cause them to change order (e.g., they are moved, keys are inserted or removed, etc.).

Parameters

[in]	index	Index of the key to be removed
[out]	change	Optional cache to store undo/redo information.

Returns: Status Code

Status Codes:

MS::kSuccess Success
MS::kIndexOutOfRange Invalid parameter passed for index - index out of range (index >= numKeys)
MS::kFailure Failure editing Node - Node does not exist or is not accessible, or change could not be cached

Examples:: atomImportExport/atomFileUtils.cpp.

MStatus addKeyframe	(	const MTime &	time,
		double	value,
		MAnimCurveChange *	change = `NULL`
	)

Adds a new key with the given value at the specified time.

Tangent types are set to kTangentGlobal. If you immediately query this key for its tangent type (after it is added), it will not be kTangentGlobal, rather it will be the specific type referred to by kTangentGlobal.

Parameters

[in]	time	Time at which the key is to be added
[in]	value	Value to which the key is to be set
[out]	change	Optional cache to store undo/redo information.

Returns: Status Code

Status Codes:

MS::kSuccess Success
MS::kFailure Failure editing Node - Node does not exist or is not accessible, or change could not be cached

Examples:: atomImportExport/atomFileUtils.cpp, createClipCmd/createClipCmd.cpp, and spiralAnimCurveCmd/spiralAnimCurveCmd.cpp.

MStatus addKeyframe	(	const MTime &	time,
		double	value,
		TangentType	tangentInType,
		TangentType	tangentOutType,
		MAnimCurveChange *	change = `NULL`
	)

Adds a new key with the given value and tangent types at the specified time.

Parameters

[in]	time	Time at which the key is to be added
[in]	value	Value to which the key is to be set
[in]	tangentInType	In tangent type for the key
[in]	tangentOutType	Out tangent type for the key
[out]	change	Optional cache to store undo/redo information.

Returns: Status Code

Status Codes:

MS::kSuccess Success
MS::kFailure Failure editing Node - Node does not exist or is not accessible, or change could not be cached

unsigned int addKey	(	const MTime &	time,
		double	value,
		TangentType	tangentInType = `kTangentGlobal`,
		TangentType	tangentOutType = `kTangentGlobal`,
		MAnimCurveChange *	change = `NULL`,
		MStatus *	ReturnStatus = `NULL`
	)

Adds a new key with the given value and tangent types at the specified time for curves of type kAnimCurveTA, kAnimCurveTL and kAnimCurveTU.

Parameters

[in]	time	Time at which the key is to be added
[in]	value	Value to which the key is to be set
[in]	tangentInType	In tangent type for the key
[in]	tangentOutType	Out tangent type for the key
[out]	change	Optional cache to store undo/redo information.
[out]	ReturnStatus	Status Code

Returns: Index of the added key

Status Codes:

MS::kSuccess Success
MS::kFailure Failure editing Node - Node does not exist or is not accessible, or change could not be cached

Examples:: animImportExport/animFileUtils.cpp, and atomImportExport/atomFileUtils.cpp.

unsigned int addKey	(	const MTime &	timeInput,
		const MTime &	timeValue,
		TangentType	tangentInType = `kTangentGlobal`,
		TangentType	tangentOutType = `kTangentGlobal`,
		MAnimCurveChange *	change = `NULL`,
		MStatus *	ReturnStatus = `NULL`
	)

Adds a new key with the given output time value and tangent types at the specified input time for curves of type kAnimCurveTT.

Parameters

[in]	timeInput	Time at which the key is to be added
[in]	timeValue	Value to which the key is to be set
[in]	tangentInType	In tangent type for the key
[in]	tangentOutType	Out tangent type for the key
[out]	change	Optional cache to store undo/redo information.
[out]	ReturnStatus	Status Code

Returns: Index of the added key

Status Codes:

MS::kSuccess Success
MS::kFailure Failure editing Node - Node does not exist or is not accessible, or change could not be cached

unsigned int addKey	(	double	unitlessInput,
		double	value,
		TangentType	tangentInType = `kTangentGlobal`,
		TangentType	tangentOutType = `kTangentGlobal`,
		MAnimCurveChange *	change = `NULL`,
		MStatus *	ReturnStatus = `NULL`
	)

Adds a new key with the given value and tangent types at the specified unitless input for curves of type kAnimCurveUA, kAnimCurveUL and kAnimCurveUU.

Parameters

[in]	unitlessInput	Unitless input at which the key is to be added
[in]	value	Value to which the key is to be set
[in]	tangentInType	In tangent type for the key
[in]	tangentOutType	Out tangent type for the key
[out]	change	Optional cache to store undo/redo information.
[out]	ReturnStatus	Status Code

Returns: Index of added key

Status Codes:

MS::kSuccess Success
MS::kFailure Failure editing Node - Node does not exist or is not accessible, or change could not be cached

unsigned int addKey	(	double	unitlessInput,
		const MTime &	timeValue,
		TangentType	tangentInType = `kTangentGlobal`,
		TangentType	tangentOutType = `kTangentGlobal`,
		MAnimCurveChange *	change = `NULL`,
		MStatus *	ReturnStatus = `NULL`
	)

Adds a new key with the given output time value and tangent types at the specified unitless input for curves of type kAnimCurveUT.

Parameters

[in]	unitlessInput	Unitless input at which the key is to be added
[in]	timeValue	Value to which the key is to be set
[in]	tangentInType	In tangent type for the key
[in]	tangentOutType	Out tangent type for the key
[out]	change	Optional cache to store undo/redo information.
[out]	ReturnStatus	Status Code

Returns: Index of added key

Status Codes:

MS::kSuccess Success
MS::kFailure Failure editing Node - Node does not exist or is not accessible, or change could not be cached

MStatus addKeys	(	MTimeArray *	timeArray,
		MDoubleArray *	valueArray,
		TangentType	tangentInType = `kTangentGlobal`,
		TangentType	tangentOutType = `kTangentGlobal`,
		bool	keepExistingKeys = `false`,
		MAnimCurveChange *	change = `NULL`
	)

Add a set of new keys with the given corresponding values and tangent types at the specified times.

This method only works for Anim Curves of type kAnimCurveTA, kAnimCurveTL and kAnimCurveTU.

This method is tuned to provide best performance when:

- the plug-in application pre-cuts the keys in the time range where the new keys are to be added
- keepExistingKeys is set to false
- change is NULL (i.e. the operation is not undoable)

These optimisations are geared towards motion capture plug-ins where a large numbers of keys must be added to a curve in a single operation.

Note: The timeArray and valueArray arrays are owned by the calling function. This method will copy those arrays to internal structures for use. As such, It is up to the caller to ensure that the memory allocated for the above arrays are deallocated appropriately.

Parameters

[in]	timeArray	Times at which keys are to be added
[in]	valueArray	Values to which the keys is to be set
[in]	tangentInType	In tangent type for all the added keys
[in]	tangentOutType	Out tangent type for all the added keys
[in]	keepExistingKeys	Specifies whether the new keys should be merged with existing keys, or if they should be cut prior to adding the new keys
[out]	change	Optional cache to store undo/redo information.

Returns: Status Code

Status Codes:

MS::kSuccess Success
MS::kFailure Failure editing Node - Node does not exist or is not accessible, or change could not be cached

bool find	(	const MTime &	time,
		unsigned int &	index,
		MStatus *	ReturnStatus = `NULL`
	)		const

Determines the index of the key which is set at the specified time.

Parameters

[in]	time	Time for which a key index is required
[in]	index	Key index at the specified time (implicit return)
[out]	ReturnStatus	Status Code

Returns: Boolean value: true if the index is found false otherwise

Status Codes:

MS::kSuccess Success
MS::kFailure Failure querying Node - Node does not exist or is not accessible

Examples:: atomImportExport/atomFileUtils.cpp.

bool find	(	double	unitlessInput,
		unsigned int &	index,
		MStatus *	ReturnStatus = `NULL`
	)		const

Determines the index of the key which is set at the specified unitless input value.

Parameters

[in]	unitlessInput	Value for which a key index is required
[in]	index	Key index at the specified time (implicit return)
[out]	ReturnStatus	Status Code

Returns: Boolean value: true if the index is found false otherwise

Status Codes:

MS::kSuccess Success
MS::kFailure Failure querying Node - Node does not exist or is not accessible

unsigned int findClosest	(	const MTime &	time,
		MStatus *	ReturnStatus = `NULL`
	)		const

Determines the index of the key which is set at the time closest to the specified time.

Parameters

[in]	time	Time for which a key index is required
[out]	ReturnStatus	Status Code .

Returns: Key index closest to the specified time

Status Codes:

MS::kSuccess Success
MS::kFailure Failure querying Node - Node does not exist or is not accessible

unsigned int findClosest	(	double	unitlessInput,
		MStatus *	ReturnStatus = `NULL`
	)		const

Determines the index of the key which is set at the time closest to the specified unitless input value.

Parameters

[in]	unitlessInput	Input value for which a key index is required
[out]	ReturnStatus	Status Code .

Returns: Key index closest to the specified time

Status Codes:

MS::kSuccess Success
MS::kFailure Failure querying Node - Node does not exist or is not accessible

MTime time	(	unsigned int	index,
		MStatus *	ReturnStatus = `NULL`
	)		const

Determines the time of the key at the specified index.

Parameters

[in]	index	Index of the key for which the time is required
[out]	ReturnStatus	Status Code .

Returns: Time (in seconds) of the key

Status Codes:

MS::kSuccess Success
MS::kIndexOutOfRange Invalid parameter passed for index - index out of range (index >= numKeys)
MS::kFailure Failure querying Node - Node does not exist or is not accessible

Examples:: animImportExport/animFileUtils.cpp, and atomImportExport/atomFileUtils.cpp.

double value	(	unsigned int	index,
		MStatus *	ReturnStatus = `NULL`
	)		const

Determines the value of the key at the specified index.

This method should only be used on Anim Curves of type kAnimCurve*A, kAnimCurve*L or kAnimCurve*U.

Parameters

[in]	index	Index of the key for which the value is required
[out]	ReturnStatus	Status Code .

Returns: Value of the key

Status Codes:

MS::kSuccess Success
MS::kIndexOutOfRange Invalid parameter passed for index - index out of range (index >= numKeys)
MS::kFailure Failure querying Node - Node does not exist or is not accessible

Examples:: animImportExport/animFileUtils.cpp, and atomImportExport/atomFileUtils.cpp.

double unitlessInput	(	unsigned int	index,
		MStatus *	ReturnStatus = `NULL`
	)		const

Determines the unitless input value of the key at the specified index.

This method should only be used on Anim Curves of type kAnimCurveU*.

Parameters

[in]	index	Index of the key for which the input value is required
[out]	ReturnStatus	Status Code .

Returns: Input value at which the key is set

Status Codes:

MS::kSuccess Success
MS::kIndexOutOfRange Invalid parameter passed for index - index out of range (index >= numKeys)
MS::kFailure Failure querying Node - Node does not exist or is not accessible

Examples:: animImportExport/animFileUtils.cpp, and atomImportExport/atomFileUtils.cpp.

MStatus setValue	(	unsigned int	index,
		double	value,
		MAnimCurveChange *	change = `NULL`
	)

Sets the value of the key at the specified index.

This method should only be used on Anim Curves of type kAnimCurve*A, kAnimCurve*L or kAnimCurve*U.

Parameters

[in]	index	Index of the key for which the value is to be set
[in]	value	Value to which the key is to be set
[out]	change	Optional cache to store undo/redo information.

Returns: Status Code

Status Codes:

MS::kSuccess Success
MS::kIndexOutOfRange Invalid parameter passed for index - index out of range (index >= numKeys)
MS::kFailure Failure editing Node - Node does not exist or is not accessible

MStatus setTime	(	unsigned int	index,
		const MTime &	time,
		MAnimCurveChange *	change = `NULL`
	)

Sets the time of the key at the specified index.

This will fail if setting the time would require re-ordering of the keys. This method should only be used on Anim Curves of type kAnimCurveT*.

Tangents may be changed so that the curve remains monotonic with respect to time.

Parameters

[in]	index	Index of the key for which the time is to be set
[in]	time	Time to which the indexed key time is to be set
[out]	change	Optional cache to store undo/redo information.

Returns: Status Code

Status Codes:

MS::kSuccess Success
MS::kInvalidParameter Invalid parameter passed for time - time out of range and/or re-ordering of keys required
MS::kIndexOutOfRange Invalid parameter passed for index - index out of range (index >= numKeys)
MS::kFailure Failure editing Node - Node does not exist or is not accessible

MStatus setUnitlessInput	(	unsigned int	index,
		double	unitlessInput,
		MAnimCurveChange *	change = `NULL`
	)

Sets the value of the unitless input of the key at the specified index.

This will fail if setting the value would require re-ordering of the keys. This method should only be used on Anim Curves of type kAnimCurveU*.

Tangents may be changed so that the curve remains monotonic with respect to the unitless input.

Parameters

[in]	index	Index of the key for which the unitless input value is to be set
[in]	unitlessInput	Value to which the indexed key unitless input value is to be set
[out]	change	Optional cache to store undo/redo information.

Returns: Status Code

Status Codes:

MS::kSuccess Success
MS::kInvalidParameter Invalid parameter passed for time - time out of range and/or re-ordering of keys required
MS::kIndexOutOfRange Invalid parameter passed for index - index out of range (index >= numKeys)
MS::kFailure Failure editing Node - Node does not exist or is not accessible

bool isTimeInput ( MStatus * ReturnStatus = NULL ) const

Determines the input type of the animCurve.

Parameters

[out] ReturnStatus Status Code .

Returns: Boolean value: true if the curve takes time as input false otherwise.

Status Codes:

MS::kSuccess Success
MS::kFailure Failure querying Node - Node does not exist or is not accessible

Examples:: animImportExport/animFileUtils.cpp, and atomImportExport/atomFileUtils.cpp.

bool isUnitlessInput ( MStatus * ReturnStatus = NULL ) const

Determines the input type of the animCurve.

Parameters

[out] ReturnStatus Status Code .

Returns: Boolean value: true if the curve takes a unitless value as input, false otherwise.

Status Codes:

MS::kSuccess Success
MS::kFailure Failure querying Node - Node does not exist or is not accessible

Examples:: animImportExport/animFileUtils.cpp, and atomImportExport/atomFileUtils.cpp.

MFnAnimCurve::TangentType inTangentType	(	unsigned int	index,
		MStatus *	ReturnStatus = `NULL`
	)		const

Determines the type of the tangent to the curve entering the current key.

Parameters

[in]	index	Index of the key for which the tangent type is required
[out]	ReturnStatus	Status Code .

Returns: Type of the tangent

Status Codes:

MS::kSuccess Success
MS::kIndexOutOfRange Invalid parameter passed for index - index out of range (index >= numKeys)
MS::kFailure Failure querying Node - Node does not exist or is not accessible, or key does not exist or is not accessible, or index is invalid

Examples:: animImportExport/animFileUtils.cpp, and atomImportExport/atomFileUtils.cpp.

MFnAnimCurve::TangentType outTangentType	(	unsigned int	index,
		MStatus *	ReturnStatus = `NULL`
	)		const

Determines the type of the tangent to the curve leaving the current key.

Parameters

[in]	index	Index of the key for which the tangent type is required
[out]	ReturnStatus	Status Code .

Returns: Type of the tangent

Status Codes:

MS::kSuccess Success
MS::kIndexOutOfRange Invalid parameter passed for index - index out of range (index >= numKeys)
MS::kFailure Failure querying Node - Node does not exist or is not accessible, or key does not exist or is not accessible, or index is invalid

Examples:: animImportExport/animFileUtils.cpp, and atomImportExport/atomFileUtils.cpp.

MStatus setInTangentType	(	unsigned int	index,
		TangentType	tangentType,
		MAnimCurveChange *	change = `NULL`
	)

Sets the type of the tangent to the curve entering the key at the specified index.

Parameters

[in]	index	Index of the key for which the tangent type is to be set
[in]	tangentType	Type to which the tangent is to be set
[out]	change	Optional cache to store undo/redo information.

Returns: Status Code

Status Codes:

MS::kSuccess Success
MS::kIndexOutOfRange Invalid parameter passed for index - index out of range (index >= numKeys)
MS::kFailure Failure querying Node - Node does not exist or is not accessible, or key does not exist or is not accessible, or index is invalid

MStatus setOutTangentType	(	unsigned int	index,
		TangentType	tangentType,
		MAnimCurveChange *	change = `NULL`
	)

Sets the type of the tangent to the curve leaving the key at the specified index.

Parameters

[in]	index	Index of the key for which the tangent type is to be set
[in]	tangentType	Type to which the tangent is to be set
[out]	change	Optional cache to store undo/redo information.

Returns: Status Code

Status Codes:

MS::kSuccess Success
MS::kIndexOutOfRange Invalid parameter passed for index - index out of range (index >= numKeys)
MS::kFailure Failure querying Node - Node does not exist or is not accessible, or key does not exist or is not accessible, or index is invalid

MStatus setTangentTypes	(	MIntArray	indexArray,
		TangentType	inTangentType = `kTangentGlobal`,
		TangentType	outTangentType = `kTangentGlobal`,
		MAnimCurveChange *	change = `NULL`
	)

Sets the tangent types for multiple keys.

Parameters

[in]	indexArray	Indices of the key for which the tangent type is to be set
[in]	inTangentType	Type to which the in tangent is to be set
[in]	outTangentType	Type to which the out tangent is to be set
[out]	change	Optional cache to store undo/redo information.

Returns: Status Code

Status Codes:

MS::kSuccess Success
MS::kInvalidParameter Index out of range (index >= numKeys)
MS::kFailure Failure querying Node - Node does not exist or is not accessible, or key does not exist or is not accessible

MStatus getTangent	(	unsigned int	index,
		float &	x,
		float &	y,
		bool	inTangent
	)		const

Determines the x,y value representing the vector of the in- or out-tangent (depending on the value of the inTangent parameter) to the curve for the key at the specified index.

The values returned will be in Maya's internal units (seconds for time, centimeters for linear, radians for angles). The following examples demonstrates how to convert from internal units of seconds into the current user time unit.

float x,y;
animCurveFn.getTangent(i,x,y,true);
MTime convert(1.0, MTime::kSeconds);
x *= (float) convert.as(MTime::uiUnit());

Parameters

[in]	index	Index of the key for which the tangent x,y value is required
[out]	x	The x value of the slope of the tangent in seconds
[out]	y	Absolute y value of the slope of the tangent
[in]	inTangent	If true, the in-tangent is returned, else, the out-tangent is returned

Returns: Status Code

Status Codes:

MS::kSuccess Success
MS::kIndexOutOfRange Invalid parameter passed for index - index out of range (index >= numKeys)
MS::kFailure Failure querying Node - Node does not exist or is not accessible, or key does not exist or is not accessible, or index is invalid

Examples:: animImportExport/animFileUtils.cpp, and atomImportExport/atomFileUtils.cpp.

MStatus getTangent	(	unsigned int	index,
		MAngle &	angle,
		double &	weight,
		bool	inTangent
	)		const

Determines the angle and weight of the in- or out-tangent to the curve for the key at the specified index.

Recall that tangents are stored as vectors internally and in the Maya Ascii file format. This means that the returned angle and weight will be converted from an (x,y) pair to represent the vector according to the following formula:

angle = atan(y/x)

weight = x/(3*cos(angle))

where x is in seconds and y is in centimeters for linear units and radians for angular units.

Parameters

[in]	index	Index of the key for which the tangent x,y value is required
[out]	angle	The tangent angle
[out]	weight	The tangent weight
[in]	inTangent	If true, the inTangent is returned, else, the outTangent is returned

Returns: Status Code

Status Codes:

MS::kSuccess Success
MS::kIndexOutOfRange Invalid parameter passed for index - index out of range (index >= numKeys)
MS::kFailure Failure querying Node - Node does not exist or is not accessible, or key does not exist or is not accessible, or index is invalid

MStatus setTangent	(	unsigned int	index,
		float	x,
		float	y,
		bool	inTangent,
		MAnimCurveChange *	change = `NULL`,
		bool	convertUnits = `true`
	)

Sets the tangent for the key at the specified index.

If convertUnits is true (the default) the x value will be scaled by the current UI time units and the y value will be scaled by the relevant UI units for the output type of the animation curve (i.e. linear units for a curve that outputs linear data, and so on).

Note that if this method is called on a locked tangent (which they are by default), the corresponding out- or in-tangent will be modified as well (i.e., they will both be set to fixed). To prevent this from occurring, you must first unlock the tangent, make your modifications and then restore the lock setting for the tangent afterwards.

Parameters

[in]	index	Index of the key for which the tangent type is to be set
[in]	x	Absolute x value of the slope of the tangent
[in]	y	Absolute y value of the slope of the tangent
[in]	inTangent	If true, the inTangent is modified, else, the outTangent is modified
[out]	change	Optional cache to store undo/redo information.
[in]	convertUnits	Whether to convert to UI units before setting

Returns: Status Code

Status Codes:

MS::kSuccess Success
MS::kIndexOutOfRange Invalid parameter passed for index - index out of range (index >= numKeys)
MS::kFailure Failure querying Node - Node does not exist or is not accessible, or key does not exist or is not accessible, or index is invalid

Examples:: animImportExport/animFileUtils.cpp, and atomImportExport/atomFileUtils.cpp.

MStatus setTangent	(	unsigned int	index,
		const MAngle &	angle,
		double	weight,
		bool	inTangent,
		MAnimCurveChange *	change = `NULL`,
		bool	convertUnits = `true`
	)

Sets the tangent for the key at the specified index.

If convertUnits is true (the default) the x value will be scaled by the current UI time units and the y value will be scaled by the relevant UI units for the output type of the animation curve (i.e. linear units for a curve that outputs linear data, and so on).

Recall that tangents are stored as vectors internally and in the Maya Ascii file format. This means that the provided angle and weight will be converted into an (x,y) pair to represent the vector according to the following formula:

x = 3 * weight * cos(angle)

y = 3 * weight * sin(angle)

Note that if this method is called on a locked tangent (which they are by default), the corresponding out- or in-tangent will be modified as well (i.e., they will both be set to fixed). To prevent this from occurring, you must first unlock the tangent, make your modifications and then restore the lock setting for the tangent afterwards.

Parameters

[in]	index	Index of the key for which the tangent type is to be set
[in]	angle	The angle to set the tangent
[in]	weight	The weight to set the tangent
[in]	inTangent	If true, the inTangent is modified, else, the outTangent is modified
[out]	change	Optional cache to store undo/redo information.
[in]	convertUnits	Whether to convert to UI units before setting

Returns: Status Code

Status Codes:

MS::kSuccess Success
MS::kIndexOutOfRange Invalid parameter passed for index - index out of range (index >= numKeys)
MS::kFailure Failure querying Node - Node does not exist or is not accessible, or key does not exist or is not accessible, or index is invalid

MStatus setAngle	(	unsigned int	index,
		const MAngle &	angle,
		bool	inTangent,
		MAnimCurveChange *	change = `NULL`
	)

Set the in- or out-angle of the tangent for the key at the given index.

Note that if this method is called on a locked tangent (which they are by default), the corresponding out- or in-tangent will be modified as well (i.e., they will both be set to fixed). To prevent this from occurring, you must first unlock the tangent, make your modifications and then restore the lock setting for the tangent afterwards.

Parameters

[in]	index	Index of the key
[in]	angle	The new in- or out-angle for the key's tangent
[in]	inTangent	If true, set the in-tangent, else out-tangent
[out]	change	Optional cache to store undo/redo information.

Returns: Status Code

Status Codes:

MS::kSuccess Success
MS::kIndexOutOfRange Invalid parameter passed for index - index out of range (index >= numKeys)
MS::kFailure Failure querying Node - Node does not exist or is not accessible, or key does not exist or is not accessible, or index is invalid

MStatus setWeight	(	unsigned int	index,
		double	weight,
		bool	inTangent,
		MAnimCurveChange *	change = `NULL`
	)

Set the in- or out-weight of the tangent for the key at the given index.

Note that if this method is called on a locked weight (which they are by default), the corresponding out- or in-weight will be modified as well. To prevent this from occurring, you must first unlock the weight, make your modifications and then restore the lock setting for the weight afterwards.

Parameters

[in]	index	Index of the key
[in]	weight	The new in- or out-weight for the key's tangent
[in]	inTangent	If true, set the in-tangent, else set out-tangent
[out]	change	Optional cache to store undo/redo information.

Returns: Status Code

Status Codes:

MS::kSuccess Success
MS::kIndexOutOfRange Invalid parameter passed for index - index out of range (index >= numKeys)
MS::kFailure Failure querying Node - Node does not exist or is not accessible, or key does not exist or is not accessible, or index is invalid

bool weightsLocked	(	unsigned int	index,
		MStatus *	ReturnStatus = `NULL`
	)		const

Determines whether the weights are locked at the given key.

Parameters

[in]	index	Index of the key to check for locked weights
[out]	ReturnStatus	Status Code .

Returns: Boolean value: true if the weights are locked, false otherwise.

Status Codes:

MS::kSuccess Success
MS::kIndexOutOfRange Invalid parameter passed for index - index out of range (index >= numKeys)
MS::kFailure Failure querying Node - Node does not exist or is not accessible, or key does not exist or is not accessible, or index is invalid

Examples:: animImportExport/animFileUtils.cpp, and atomImportExport/atomFileUtils.cpp.

bool tangentsLocked	(	unsigned int	index,
		MStatus *	ReturnStatus = `NULL`
	)		const

Determines whether the tangents are locked at the given key.

Parameters

[in]	index	Index of the key to check for locked tangents
[out]	ReturnStatus	Status Code .

Returns: Boolean value: true if the tangents are locked, false otherwise.

Status Codes:

MS::kSuccess Success
MS::kIndexOutOfRange Invalid parameter passed for index - index out of range (index >= numKeys)
MS::kFailure Failure querying Node - Node does not exist or is not accessible, or key does not exist or is not accessible, or index is invalid

Examples:: animImportExport/animFileUtils.cpp, and atomImportExport/atomFileUtils.cpp.

MStatus setWeightsLocked	(	unsigned int	index,
		bool	locked,
		MAnimCurveChange *	change = `NULL`
	)

Lock or unlock the weights at the given key.

Parameters

[in]	index	Index of the key at which to set/unset the locks
[in]	locked	true if the weights are to be locked, false otherwise
[out]	change	Optional cache to store undo/redo information.

Returns: Status Code

Status Codes:

MS::kSuccess Success
MS::kIndexOutOfRange Invalid parameter passed for index - index out of range (index >= numKeys)
MS::kFailure Failure querying Node - Node does not exist or is not accessible, or key does not exist or is not accessible, or index is invalid

Examples:: animImportExport/animFileUtils.cpp, and atomImportExport/atomFileUtils.cpp.

MStatus setTangentsLocked	(	unsigned int	index,
		bool	locked,
		MAnimCurveChange *	change = `NULL`
	)

Lock or unlock the tangents at the given key.

Parameters

[in]	index	Index of the key at which to set/unset the locks
[in]	locked	true if the tangents are to be locked, false otherwise
[out]	change	Optional cache to store undo/redo information.

Returns: Status Code

Status Codes:

MS::kSuccess Success
MS::kIndexOutOfRange Invalid parameter passed for index - index out of range (index >= numKeys)
MS::kFailure Failure querying Node - Node does not exist or is not accessible, or key does not exist or is not accessible, or index is invalid

Examples:: animImportExport/animFileUtils.cpp, and atomImportExport/atomFileUtils.cpp.

MFnAnimCurve::InfinityType preInfinityType ( MStatus * ReturnStatus = NULL ) const

Determines the behaviour of the curve for the range occurring before the first key.

Parameters

[out] ReturnStatus Status Code .

Returns: The current preInfinityType for the curve

Status Codes:

MS::kSuccess Success
MS::kFailure Failure querying Node - Node does not exist or is not accessible, or key does not exist or is not accessible, or index is invalid

Examples:: animImportExport/animFileUtils.cpp, and atomImportExport/atomFileUtils.cpp.

MFnAnimCurve::InfinityType postInfinityType ( MStatus * ReturnStatus = NULL ) const

Determines the behaviour of the curve for the range occurring after the last key.

Parameters

[out] ReturnStatus Status Code .

Returns: The current postInfinityType for the curve

Status Codes:

MS::kSuccess Success
MS::kFailure Failure querying Node - Node does not exist or is not accessible, or key does not exist or is not accessible, or index is invalid

Examples:: animImportExport/animFileUtils.cpp, and atomImportExport/atomFileUtils.cpp.

MStatus setPreInfinityType	(	MFnAnimCurve::InfinityType	infinityType,
		MAnimCurveChange *	change = `NULL`
	)

Set the behaviour of the curve for the range occurring before the first key.

Parameters

[in]	infinityType	The infinity type to be set.
[out]	change	Optional cache to store undo/redo information.

Returns: Status Code

Status Codes:

MS::kSuccess Success
MS::kFailure Failure querying Node - Node does not exist or is not accessible, or key does not exist or is not accessible, or index is invalid

Examples:: animImportExport/animFileUtils.cpp, and atomImportExport/atomFileUtils.cpp.

MStatus setPostInfinityType	(	MFnAnimCurve::InfinityType	infinityType,
		MAnimCurveChange *	change = `NULL`
	)

Set the behaviour of the curve for the range occurring after the last key.

Parameters

[in]	infinityType	The infinity type to be set.
[out]	change	Optional cache to store undo/redo information.

Returns: Status Code

Status Codes:

MS::kSuccess Success
MS::kFailure Failure querying Node - Node does not exist or is not accessible, or key does not exist or is not accessible, or index is invalid

Examples:: animImportExport/animFileUtils.cpp, and atomImportExport/atomFileUtils.cpp.

bool isWeighted ( MStatus * ReturnStatus = NULL ) const

Determines whether or not the curve has weighted tangents.

Parameters

[out] ReturnStatus Status Code .

Returns: Boolean value: true if the curve has weighted tangents, false otherwise.

Status Codes:

MS::kSuccess Success
MS::kFailure Failure querying Node - Node does not exist or is not accessible

Examples:: animImportExport/animFileUtils.cpp, and atomImportExport/atomFileUtils.cpp.

MStatus setIsWeighted	(	bool	isWeighted,
		MAnimCurveChange *	change = `NULL`
	)

Sets whether or not the curve has weighted tangents.

Parameters

[in]	isWeighted	Whether or not the curve should have weighted tangents
[out]	change	Optional cache to store undo/redo information.

Returns: Status Code

Status Codes:

MS::kSuccess Success
MS::kFailure Failure editing Node - Node does not exist or is not accessible, or change could not be cached

Examples:: animImportExport/animFileUtils.cpp, and atomImportExport/atomFileUtils.cpp.

bool isBreakdown	(	unsigned int	index,
		MStatus *	ReturnStatus = `NULL`
	)		const

Determines whether or not a key is a breakdown.

Parameters

[in]	index	The key's index
[out]	ReturnStatus	Status Code .

Returns: Boolean value: true if the key is a breakdown, false otherwise.

Status Codes:

MS::kSuccess Success
MS::kIndexOutOfRange Invalid parameter passed for index - index out of range (index >= numKeys)
MS::kFailure Failure querying Node - Node does not exist or is not accessible

Examples:: animImportExport/animFileUtils.cpp, and atomImportExport/atomFileUtils.cpp.

MStatus setIsBreakdown	(	unsigned int	index,
		bool	isBreakdown,
		MAnimCurveChange *	change = `NULL`
	)

Sets the breakdown state of a key at a given index.

Parameters

[in]	index	Index of the key whose breakdown state is to be modified
[in]	isBreakdown	The new breakdown state for the key.
[out]	change	Optional cache to store undo/redo information.

Returns: Status Code

Status Codes:

MS::kSuccess Success
MS::kIndexOutOfRange Invalid parameter passed for index - index out of range (index >= numKeys)
MS::kFailure Failure editing Node - Node does not exist or is not accessible, or change could not be cached

Examples:: animImportExport/animFileUtils.cpp, and atomImportExport/atomFileUtils.cpp.

The documentation for this class was generated from the following files:

MFnAnimCurve.h
MFnAnimCurve.cpp

MFnAnimCurve Class Reference

Class Description

Public Types

Public Member Functions

Protected Member Functions

Additional Inherited Members

Member Enumeration Documentation

Constructor & Destructor Documentation

Member Function Documentation