Time Slider preferences

You can set the following preferences in the Time Slider category of the Preferences window.

To return to the default factory settings, choose Edit > Restore Default Settings in this window. Note that this resets the preferences in every category in the Preferences window.

Note: To open the Preferences window with the Time Slider category selected, click the Animation Preferences icon

in the lower-right corner of the Maya window.

Time Slider

Framerate

Set a frame rate for the current scene.

Frame selections include: 2 fps, 3 fps, 4 fps, 5 fps, 6 fps, 8 fps, 10 fps, 12 fps, 15 fps, 16 fps, 20 fps, 23.976 fps, 24 fps (Film), 25 fps (PAL), 29.97 fps, 29.97 df (drop frame), 30 fps, 40 fps, 47.952 fps, 48 fps (Show), 50 fps (PAL Field), 59.94 fps, 60 fps (NTSC Field), 75 fps, 80 fps, 100 fps, 120 fps, 125 fps, 150 fps, 200 fps, 240 fps, 250 fps, 300 fps, 375 fps, 400 fps, 500 fps, 600 fps, 750 fps, 1200 fps, 1500 fps, 2000 fps, 3000 fps, 6000 fps, 44 100 fps, and 48 000 fps.

Keep keys at current frames

By default when you change the current time unit, the times for any existing keys are modified so that playback timing is preserved. For example, a key set at frame 12film changes to frame 15ntsc when the current time unit is changed to NTSC, since they both represent a key at 0.5 seconds. When this option is on, it leaves the key at 12ntsc that was originally at 12film. The default setting for this option is off. The option turns on once the current Time unit is changed above.

Playback start/end

Specifies playback range start and end times. The playback start and end times specify the Time Slider playback range. The playback range is always within the animation range. You can also specify the time units. See Edit animation preferences.

Animation start/end

Specifies animation range start and end times. The animation start and end times specify the Range Slider range. The playback range always stays within the animation range, so changing the animation start and end times can also change the playback start and end times. Default animation start time is 1.00. Default animation end time is 48.00. You can also specify the time units. See Edit animation preferences.

Height

Specifies the Time Slider height (the vertical space it occupies). Increasing the height is especially useful when you are working with sound. Double or quadruple the height for a better display of sound waveforms. Click 1x (normal height), 2x (double height), or 4x (quadruple height). Default is 1x.

Grease Pencil Frames

Lets you set how Grease Pencil frames display in the Time Slider. Default is Active, so that Grease Pencil frames display for the current camera only.

Set to None if you don't want Grease Pencil frames to display in the Time Slider, or set to All if you want to see all Grease Pencil frames regardless of the active camera. See also Control display of Grease Pencil frames in the Time Slider.

Key ticks

Specifies how the line markers that indicate keys appear on the Time Slider. Click None, Active, or Channel Box. Default is Active.

None: Specifies that key ticks are not displayed. Selecting None is useful if you have a lot of keys and want to improve workspace selection performance.
Active: Specifies that key ticks are displayed, with associated keys available for selection and editing.
Channel Box: Specifies that key ticks appear only for the currently selected channels in the Channel Box. This is useful if you are using the Time Slider to edit keys on particular channels of an animated object.
Smart: Allows you to switch between displaying all key ticks and key ticks associated with specific channels.

Key tick size

Change the thickness of ticks that represent keyframes in the Maya Time Slider. Key thickness is measured in pixels. Click 1x (default width), 2x (double width), or 3x (triple width).

Time Display

Select what format Time information appears on the Time Marker:

Frames: Displays frames on all time rulers, current time markers, and input fields which display or accept time.
Timecode: Displays video standard timecode on all time rulers, current time markers, and input fields which display or accept time.
Timecode and frames on Time Marker: Displays video standard timecode on timemarkers while time rulers shown frames. This is the legacy display when Timecode is set in the in the Time Slider options in the Time Slider Preferences

Note: An asterisk "*" appears next to any number in the Time Slider that has been rounded to the second decimal place to indicate the value has been approximated. This happens sometimes when you switch between Time Code and Frames or if the Snap to Whole Frames option is disabled in the Time Slider preferences.

Channel Box Sync

Sync Timeline Display: When on, synchronizes your selections in the Channel Box to the Time Slider so that the Time Slider displays only keys for those selected channels. When you set a keyframe (press S or select Key > Set Key), only channels selected in the Channel Box are keyed. If nothing is selected in the Channel Box, the Time Slider displays keys for selected objects as usual.
Sync Graph Editor Display: When on, synchronizes your selections in the Channel Box to also display in the Graph Editor. If no channels are selected in the Channel Box, the Graph Editor displays curves for selected objects as usual.

Snap to whole frames

When you activate Snapping On, Maya steps through animation times by integer values, snapping to the nearest integer. The default is On. If working with sound or small time ranges, you can turn off Snap to whole frames for smoother scrubbing.

Tick Span

Specifies the way key ticks are displayed when zooming in or out in the Time Slider. Tick span is measured in multiples of 24, so you can display ticks every 6, 12, 24, or 48 frames. The default value for this preference is 0.

Playback

Playback speed

Specifies the speed at which your scene plays. Select Play Every Frame, 24fps x 1, 24fps x 0.5, 24fps x 2, or Other, which activates a field where you can enter a custom playback speed. Playback speed uses the frame rate set in the Working Units section of the Settings preferences. The default is Play Every Frame.

You can also specify the playback time units. See Edit animation preferences.

Play every frame

When selected, all the frames in your scene play, updating each before displaying the next. The speed depends on how long it takes your workstation to compute and draw each frame. You can specify the playback frame increment in the Playback by field. For example, a Playback value of 2.0 plays only every other frame.

24fps x 1

When selected, your scene plays at the frame rate set in the Working Units section of the Settings preferences. (The default fps is Maya is 24 frames per second). Maya may not display all frames, depending on your workstation’s capabilities, the scene’s complexity, and the display mode (for example, wireframe or smooth shading).

24fps x 0.5

When selected, your scene plays at half the speed set in the Working Units section of the Settings preferences.

24fps x 2

When selected, your scene plays at twice the speed set in the Working Units section of the Settings preferences.

Other

When selected, your scene plays at the custom playback speed specified with the Other Speed setting.

Other Speed

Available only when Playback Speed is set to Other.

Let you set a custom playback speed (in frames per second) for your scene. For example, if you specify an Other Speed value of 72, animation plays back at 72 fps.

Playback by

Specifies playback increments if Playback speed is set to Play Every Frame. For example, if you enter 4, Maya plays only every fourth frame (or time). Default is 1.000. You can also specify the playback time units.

Max Playback Speed

Lets you clamp the animation playback speed by specifying a value the speed cannot exceed. This is useful when working with scenes that have fluctuating levels of heavy CPU activity, such as a scene with a complex particle effect.

Free

Specifies no Max Playback Speed.

Real-time (24 fps)

Specifies that the overall playback speed of your scene’s animation is as fast as possible, but it does not exceed 24 fps.

Half (12 fps)

Specifies that the overall playback speed of your scene’s animation is as fast as possible, but it does not exceed 12 fps.

Twice (48 fps)

Specifies that the overall playback speed of your scene’s animation is as fast as possible, but it does not exceed 48 fps.

Update view

If your workspace layout includes several views (for example, selected from Panels > Layouts), you can improve performance by having the scene play in only the currently active view. Click Active or All. Default is Active.

Active: Scene plays only in the current, active view.
All: Scene plays in all the workspace views.

Looping

Specifies what happens when the scene plays forward and then reaches the playback end time (or if playing backwards, the playback start time). Click Once, Oscillate, or Continuous. Default is Continuous.

Note: You can quickly set looping options using the Loop icon

in the Playback Options, next to the Range Slider.

Once: Specifies that the scene plays once and then stops.
Oscillate: Specifies that the scene plays forward (or backward) and then plays backward (or forward) until you stop playback.
Continuous: Specifies that the scene plays forward (or backward) and then plays backward (or forward) until you stop playback.