Set Processing Conditions and Run

In this step, the molding process settings are reviewed and the analysis is started.

1. Click (Home > Molding Process Setup > Process Settings) to see the process settings wizard. For this analysis, no changes are being made. Review the settings available, especially Advanced options > Solver parameters > Edit. A wide range of parameters are set from the relevant tab of this dialog.

2. Click (Mesh tab > Mesh panel > Generate Mesh). The Generate Mesh Tools panel opens.
3. Select the CAD tab.
4. Enter 2 into the Scale factor dialog box.

   This makes the part mesh coarser than the default value. A coarser mesh takes a shorter time to analyse. As the initial analyses are used to establish the parameters that need to be investigated, the reduced accuracy of a coarser mesh is acceptable. The finer default mesh is recommended for fine tuning a result or validating a setup.

5. Click (Home > Molding Process Setup > Start Analysis).

   The CAD model is automatically meshed and the analysis is launched. The analysis will take about a minute to run.

6. When the analysis is finished, de-select Logs from the Study Tasks pane.

Previous ¦ Next