Input the Process Settings

In this task, you input the coolant inlet parameters, the process settings plus, and then run the analysis.

1. Select one of the coolant inlets.

   

2. Right click and select Properties.

3. Set the Coolant inlet temperature to 40° C, and Click OK.

4. Set the same coolant temperature for the other coolant inlet.

5. Click (Home tab > Molding Process Setup panel > Process Settings).

6. Ensure that the Melt temperature is 230°C.

7. Ensure that the Mold-open time is 5 seconds.

8. Set the Injection + Packing + Cooling time to 15 seconds.

9. Click Advanced options and select Solver parameters > Edit
10. Select the Cool(FEM) Analysis tag.

11. Set the Mold temperature options to Averaged within cycle.

12. Click OK to close the dialogs.

13. Click (Home tab > Analysis panel > Analyze) to run the analysis locally.

14. When the analysis is finished, click Logs to close the Logs panel.

Previous ¦ Next