Spring

The Spring object takes the form of a coiled spring that lets you simulate a flexible spring in animations. You can specify the overall diameter and length of the spring, the number of turns, and the diameter and shape of its “wire.” When you attach the spring to two "binding" objects, it follows their motion.

• Create panel > (Geometry) > Dynamics Objects > Object Type rollout > Spring button
• Default menu: Create menu > Dynamics > Spring
• Alt menu: Objects menu > Dynamics and Body Objects Helpers > Spring

Procedure

To create a spring:

1. Drag and release to specify the outside diameter.
2. Move the mouse and click to specify the overall length of the spring.

Interface

Spring Parameters rollout

End Point Method group

Free Spring

Choose this when using the spring as a simple object that’s not bound to other objects or used in a dynamics simulation.

Bound to Object Pivots

Choose this when binding the spring to two objects, using the buttons described next.

Binding Objects group

Use these controls to pick the objects to which the spring is bound. "Top" and "Bottom" are arbitrary descriptors; the two bound objects can have any positional relationship to each other. To complete the binding, select two binding objects, and then click Bound to Object Pivots.

Each end point of the spring is defined by the center of the overall diameter and the center of the wire. This end point is placed at the pivot point of the object to which it is bound. You can adjust the relative position of the binding object to the spring by transforming the binding object while the Affect Object Only button is turned on in the Hierarchy Pivot panel.

Top (label)

Displays the name of the "top" binding object.

Pick Top Object

Click this button and then select the "top" object.

Bottom (label)

Displays the name of the "bottom" binding object.

Pick Bottom Object

Click this button and then select the "bottom" object.

Free Spring Parameters group

Height

Use this field/spinner to set the straight-line height or length of the spring when it is not bound. This is not the actual length of the spring's wire.

Common Spring Parameters group

Diameter

The overall diameter of the spring, as measured at the center of the wire. (The diameter of the wire itself has no effect on this setting.)

Turns

The number of full 360-degree turns in the spring.

CCW/CW

Specifies whether the coils of the spring are counterclockwise (CCW) or clockwise (CW).

Automatic Segments

Choose this option to force each turn of the spring to contains the same number of segments, as specified in the Segs/Turn spinner. Thus, if you increase the number of turns, the number of segments also increases.

Segs/Turn

This spinner lets you specify the number of segments in each 360-degree turn of the spring.

Manual Segments

When this option is chosen, the length of the spring contains a fixed number of segments, no matter how many turns in the spring. Thus, as you increase the number of turns, you must manually increase the number of segments to maintain a smooth curve.

Segments

This spinner lets you specify the total number of manual segments in the spring.

Smoothing

Provides various methods of smoothing the object. The options here work the same as those in the Torus primitive.

• All All surfaces are smoothed.
• Sides Smoothing runs along the length of the wire, but not around its perimeter.
• Segments Smoothing runs around the perimeter of the wire, but not along its length.
• None No smoothing is applied.

Renderable

When on, the object appears in the rendering; when off, the object does not appear.

Generate Mapping Coords

Assigns mapping coordinates to the object. Default=on.

Wire Shape group

Provides three different types of wire cross-sections for the spring: round, rectangular, or D-shaped. Each type has its own set of parameters.

Round Wire

Specifies a round wire for the spring.

• Diameter The diameter of the wire.
• Sides The number of sides that make up the cross section.

Rectangular Wire

Specifies a rectangular wire.

• Width Determines the width of the cross section.
• Depth Determines the depth of the cross section.
• Fillet When combined with Fillet Segs (below), this lets you fillet (round) the corners of the cross section.
• Fillet Segs Specifies the number of segments in the fillet.
• Rotation Rotates the angle of the cross section along the entire length of the spring.

D-Section Wire

Specifies a D-shaped wire.

• Width Determines the width of the cross section.
• Depth Determines the depth of the cross section.
• Round Sides Specifies the number of segments that make up the rounded side of the D-shape.
• Fillet When combined with Fillet Segs (below), this lets you fillet (round) the corners of the cross section.
• Fillet Segs Specifies the number of segments in the fillet.
• Rotation Rotates the angle of the cross section along the entire length of the spring.