Use this procedure to set the cut plane and the visible display range for a display configuration.
If you want to… | Then… |
---|---|
define the global cut plane height for the current display configuration | click the value for Cut Plane on the status bar. Note: Specify a cut plane that falls within the display range, or change the value of the display range to include the cut plane height.
|
define the global cut plane height for any display configuration | click . Then, select a display configuration in the left pane, and click the Cut Plane tab. |
If you want to… | Then… |
---|---|
define the global cut plane height for the display configuration | enter the appropriate value for Cut Height. |
define the visible range above the cut plane | enter the appropriate value for Display Above Range. Note: The value you enter here is calculated from the WCS origin and is not relative to the cut height.
|
define the visible range below the cut plane | enter the appropriate value for Display Below Range. Note: The value you enter here is calculated from the WCS origin, and is not relative to the cut height.
|
You must specify a cut plane that falls within the display range, or adjust the value of the display range to include the cut plane height.