Defines the columns for your tabular terminal report. The selections are stored in the table when it is inserted and the next time the terminal strip is edited, all of the settings are read back in.
Find
Command entry:
AETSE
Make your selection on the Terminal Strip Selection dialog box and click Edit. On the Layout Preview tab, select Tabular Terminal Strip (Table Object). Click Define Columns.
|
Available Fields |
Lists the available fields for formatting the table. Select a field from the list to transfer it into the Fields to Report list. |
|
Fields to Report |
Lists the fields to display in the table. |
|
Remove/Remove All |
Removes the selected field or all fields from the Fields to Report list. |
|
Move Up |
Moves the selected field up one spot in the Fields to Report list. |
|
Move Down |
Moves the selected field down one spot in the Fields to Report list. |
|
Cell Style |
Specifies the cell style for the table. Within the table styles, you can define different cell styles to use. They give the added flexibility to customize how the terminal strip appears. As you select one of the fields to report you can assign a cell style to the selection. |
|
Name |
Displays the name for the field that is selected in the Fields to Report section of the dialog box. Use the default name or enter a new name in the edit box. |
|
Width |
Specifies the column width to set for the selected Field to Report. Enter a positive numeric value in the edit box. |
|
Always show jumper circles |
Specifies that jumper circles are always shown, and how many, even if a jumper connection is not defined for that terminal.
Note: This control is available only when the “Jumper” field is selected.
|
|
Always show internal jumper squares |
Specifies that internal jumper squares are always shown, and how many, even if a jumper connection is not defined for that terminal.
Note: This control is available only when the “Jumper-Internal” field is selected.
|
Available Fields
|
Installation1 |
Left Installation column in the Terminal Strip Editor grids. |
|
Location1 |
Left Location column in the Terminal Strip Editor grids. |
|
Device1 |
Left Device column in the Terminal Strip Editor grids. |
|
Pin1 |
Left Pin column in the Terminal Strip Editor grids. |
|
Wire1 |
Left Wire column in the Terminal Strip Editor grids. |
|
Type1 |
Left Type column in the Terminal Strip Editor grids. |
|
Cable1 |
Left Cable column in the Terminal Strip Editor Cable Information grid. |
|
Conductor1 |
Left Conductor column in the Terminal Strip Editor Cable Information grid. |
|
T1 |
Left T column in the Terminal Strip Editor grids. |
|
Number |
Number column in the Terminal Strip Editor grids. |
|
T2 |
Right T column in the Terminal Strip Editor grids. |
|
Manufacturer |
Manufacturer column in the Terminal Strip Editor Catalog Code Assignment grid. |
|
Catalog |
Catalog column in the Terminal Strip Editor Catalog Code Assignment grid. |
|
Conductor2 |
Right Conductor column in the Terminal Strip Editor Cable Information grid. |
|
Cable2 |
Right Cable column in the Terminal Strip Editor Cable Information grid. |
|
Type2 |
Right Type column in the Terminal Strip Editor grids. |
|
Wire2 |
Right Wire column in the Terminal Strip Editor grids. |
|
Pin2 |
Right Pin column in the Terminal Strip Editor grids. |
|
Device2 |
Right Device column in the Terminal Strip Editor grids. |
|
Location2 |
Right Location column in the Terminal Strip Editor grids. |
|
Installation2 |
Right Installation column in the Terminal Strip Editor grids. |
|
Jumper |
Column for displaying defined jumpers. |