Styles Tab (Project Properties Dialog Box)

Modify project settings for various component styles.

Find
 Command entry:  AEPROJECT

All information defined in this tab is saved to the project definition file as project defaults and settings.

In the Project Manager, right-click on the project name and select Properties. Select the Styles tab.

Arrow Style

Specifies the default wire signal arrow style. Select from the four predefined styles or a user-defined style. You can override the default style setting at insertion time.

PLC Style

Specifies the default PLC module style. Select from the five predefined styles or a user-defined style.

Fan-In/Out Marker Style

Defines the default Fan In/Out marker style and the layers for wires going out of a Fan In/Out Source marker and those coming into a Destination marker.

Layer List

Lists the Fan In/Out layers.

Add

Defines layer names as Fan In/Out layers.

Remove

Removes the selected layer from the defined layer list.

Wire Cross

Specifies the default mode of operation when wires cross each other: insert gap with no loop, insert gap and loop, or solid (no gap).

Wire Tee

Specifies the default wire tee marker: none, dot, angle1, or angle2.