Insert schematic terminals from a list of panel terminals extracted from your panel drawings.
Find
Command entry:
AETERMINALPNL
This report provides error checking between the schematics and the panel layout drawings. The program looks at the selected drawings, both schematic and panel, looking for a match. For each panel component, the routine tries to find a matching schematic component based on tag, location, and installation information. If a match is found, then it compares catalog information looking for any discrepancies.
|
Extract terminal list for |
Specifies to export the data for the active drawing or multiple drawings in the active project. |
|
Save list to external file |
Creates a comma-delimited file of the panel component data. The extracted file name is the same as the project by default (project_name.WD4). You can display this data in spreadsheet format (open it in comma-delimited "CSV" format), edit, and then save. |
|
Browse |
Uses a previous project's terminal list to create a spreadsheet listing. After the initial extraction, a list of terminals displays for selection. |
|
Installation Codes to extract |
Extracts only the information for panel terminals with specific installation values. Once you pick Named Installation, you can type the installation code in the box or click List: Drawing or List: Project to select from a list of used installation codes. |
|
Location Codes to extract |
Extracts only the information for panel terminals with specific location values. Once you pick Named Location, you can type the location code in the box or click List: Drawing or List: Project to select from a list of used location codes. |