To Modify the Duct or Fitting Location

1. In the drawing, select the part to modify.
2. On the Properties palette, under Placement, specify the location or orientation to change:

   If you want to…	then...
   change the elevation	enter a different value for Elevation.
   rotate the MvPart around its normal axis	specify a value for Rotation.
   enter coordinates to specify a new location	Click (Additional Information). In the Location worksheet, under Insertion Point, specify the new X, Y, and Z coordinates and click OK.
   change the normal axis, and reorient the part along the new normal	Click (Additional Information). In the Location worksheet, under Normal, specify 1 for the normal axis, and specify 0 for the other 2 axes, and then click OK.

3. Deselect that part, and then select the fitting in the drawing you want to modify.
4. On the Properties palette, click (Additional Information).
5. In the Location worksheet, specify the location or orientation to change and then click OK.

   If you want to…	then…
   rotate the part around its normal axis	under Rotation, specify a value for Angle.
   enter coordinates to specify a new location	under Insertion Point, specify the new X, Y, and Z coordinates.
   change the normal axis, and reorient the part along the new normal	under Normal, specify 1 for the normal axis, and specify 0 for the other 2 axes.