References to Standard Holes (AutoCAD Mechanical Toolset)

References to standard holes refer to selected properties that are unique to standard holes. The program typically uses them in hole charts and notes to annotate holes (Hole notes).

HOLE:CTANGLE Refers to the countersink angle of the hole.

HOLE:CTDEPTH Refers to the counterbore depth of the hole.

HOLE:CTDIA Refers to the counterbore or countersink diameter of the hole.

HOLE:DEPTH Refers to the depth of the hole.

HOLE:DESC Refers to the description of the hole.

HOLE:DIA Refers to the diameter of the hole.

HOLE:DRILLDIRECTION Refers to the drill direction of the hole in the unit vector format. For example, if the direction is parallel to the x-axis of WCS, contains a value of 1 0 0.

HOLE:DRPNTANGLE Refers to the Pt' angle of a blind hole.

HOLE:FITCLASS Refers to the fit class of the hole.

HOLE:NOMINAL Refers to the nominal size of the hole.

HOLE:PITCH Refers to the thread pitch of the hole.

HOLE:PITCHDESC Refers to the description of the thread pitch of the hole.

HOLE:STD Refers to a string indicating the standard of the hole.

HOLE:TAPDEPTH Refers to the tap depth of the hole.

HOLE:TAPDRILLDIA Refers to the tap drill diameter of the hole.

HOLE:TAPMAJDIA Refers to the taper major diameter value of a tapered hole.

HOLE:TAPMINDIA Refers to the taper minor diameter value of a tapered hole.

HOLE:TAPPED Refers to a numeric value that indicates the type of tap used for a hole. 0 - No thread 1 - full length of the hole is not threaded 2 - full length of the hole is threaded

HOLE:TERMINATION Refers to a numeric value that indicates the type of termination of a hole. 0 - blind hole 2 - through hole

HOLE:UNITS Refers to a numeric value that indicates the type of units of the hole 0 - inches 1 - metric.

STDP:AMBOREDEPTH Refers to depth of the hole.

STDP:AMBOREDIA Refers to the diameter of the bore hole.

STDP:AMCBOREDEPTH Refers to the counterbore depth of the hole.

STDP:AMCBOREDIA Refers to the counterbore diameter of the hole.

STDP:AMCSNKDIA Refers to the countersink depth of the hole.

STDP:AMCSNKANGLE Refers to the countersink angle of the hole.

STDP:AMTHREADDEPTH Refers to the depth of the thread hole.

STDP:AMTHREADDIA Refers to the diameter of the thread hole.

Where can these references be used?

Formulas in...	Yes/No
Notes (Created with AMNOTE)	Yes
BOM/Parts list columns	No
Balloons	No
Hole chart columns	Yes
Hole chart table titles	No
Detail view labels	No
Annotation View labels	No
Section line labels	No