- Create a block for the heading row. To create the block:
- In the drawing area, create the frame and heading text for the heading row.
- Use the BLOCK command to convert the geometry and text into a block.
Note: The block name must end with the digit 0.
- Create blocks for the parts list data rows. To create the blocks:
- In the drawing area, create the geometry for the parts list row pattern.
- Use the ATTDEF command to add attributes to display row data.
Note:
- Place the attributes at the position you intend to display the component.
- The tags of the attributes must be the component property name or the component property ID (See the topic Component Property Id Reference for a full list of component ).
- Use the BLOCK command to convert the geometry and attributes into blocks.
Note:
- The body blocks must have the same name as the heading block, but must end with a digit other than 0.
- The name of the first body block must end with the digit 1, the second with the digit 2, and so on.
- In the drawing area, move the blocks to obtain the desired appearance of a data row.
Tip: A formula can be used as the tag for attributes included in custom parts list blocks.