Exercise R3: Recognize a Table

In this exercise, you change text in a table from raster text to AutoCAD text in your drawing.

The general process is as follows:

• Enter the parameters for the recognition engine.
• Select a table in your drawing using the rectangular selection method.
• Make corrections to the recognized text using the tools in the Verify Table window.
• Insert the table into the drawing as AutoCAD text.

Related Exercises

• Exercise R1: Recognize Machine-Printed Text
• Exercise R2: Recognize Hand-Printed Text

Before doing this exercise, ensure that AutoCAD Raster Design toolset options are set as described in the exercise Exercise A1: Setting AutoCAD Raster Design Toolset Options.

Exercise

1. In the\Tutorial9 folder, open the drawing file textrec_02.dwg.

   Choose an image to insert

2. To display the Insert Image dialog box, click RasterInsert.
3. From the Files of Type list, select All Image Files.
4. If necessary, navigate to the \Tutorial9 folder. Select the image file text_rec_table.tif.
5. In the Insert Options area, click Quick Insert and Zoom to Image. Click Open.

   The image is inserted.

   Convert raster text in a table to AutoCAD text

6. To display the Text Recognition Setup dialog box, click RasterText RecognitionRecognize Setup.
7. In the Input section, select the following settings:
   • Selection Shape is Rectangular.
   • Select the Spelling dictionary.
   • Select English in the Spelling Language list.
   • Select the AutoCAD Custom dictionary.
   • Click Language Character Set and select English.
   • In the Recognize section, select Uppercase, Numbers, Punctuation, and Miscellaneous.
8. In the AutoCAD Output section, select the following settings:
   • Output Type is Text.
   • Text Height is Style Height.
   • AutoCAD Style is Table Text.
   • Removal Method is Rub.
9. In the Verification Display section, clear all the check boxes.
10. Click OK.
11. Click Raster menu Text RecognitionRecognize Table.
12. Draw a rectangle to enclose the table as follows: click the upper left corner, press Enter to set the angle to 0, then click the bottom right corner.
    
13. The Verify Table window opens. The View pane (upper pane) displays the original raster text; the Edit pane (lower pane) displays the output from the recognition engine.

    The following example shows typical results for the Recognize Table command.

    
14. Review the results in the Edit pane of the Verify Table window. In this example you would change the $ characters in the first column to the numeral 8 and correct the spacing for the word INCH.
    Attention: Because no recognition engine is 100% accurate, you should carefully review the results in the Edit pane, not just the highlighted areas, and make all necessary changes.
15. Click OK to insert the table as AutoCAD text in the drawing.

    If necessary, you can use standard AutoCAD commands to move or edit the text.

16. Close the drawing without saving changes.