Sets parameters for calculation of cone joints.
|
Access: |
Ribbon:
Design tab
Power Transmission panel
Cone Joint Calculator
|
|
Loads |
|
|
Loading is entered through torque. |
|
|
Dimensions |
|
|
Enter the dimensions of the cone hub joint. |
|
|
d, D, L
|
Calculates the pin taper ratio for the specified pin diameters and joint length. |
|
d, D, Taper Ratio
|
Calculates the joint length for the specified pin diameters and taper ratio. |
|
d, L, Taper Ratio
|
Calculates the major pin diameter for the specified taper ratio, minor pin diameter, and joint length. |
|
D, L, Taper Ratio
|
Calculates the minor pin diameter for the specified taper ratio, major pin diameter, and joint length. |
|
Joint Properties |
|
|
Type of Loading |
Using the roll-down menu, select the Type of loading. |
|
Material |
Check the check box to open Material Database and select a material. Edit the properties of the material, if needed. |
|
Allowable Pressure |
Allowable pressure in the joint is entered by selection from the list according to the joint character or by typing a value into the input field. |
Results
Displays the calculated values and the joint strength check.
Summary of Messages area
Summary of Messages area opens at the bottom of the tab when you double-click the double line at the bottom of tabs or if you click the chevron at the bottom of the tabs. It displays the reports about calculation.