Sets parameters for calculation of slotted hub joints.
|
Access: |
Ribbon:
Design tab
Power Transmission panel
Slotted Hub Calculator
|
|
Type of Strength Calculation |
|
|
Hub Length Design |
Designs optimal hub length for the specified load, shaft diameter, and joint properties. |
|
Shaft Diameter Design |
Designs optimal shaft diameter for the specified load and joint properties. |
|
Check Calculation |
Performs the strength check for the specified load, dimensions, and joint properties. |
|
Loads |
|
|
Loading is entered through axial force or torque. |
|
|
Deformation Force |
Check the box to calculate the deformation force. Note: This edit field is enabled only if Consider the Clamp Deformation box is selected.
|
|
Dimensions |
|
|
Specifies values you enter for the dimensions of the slotted hub joint. |
|
|
Consider the Clamp Deformation |
|
|
Select the box to calculate the force which deforms the joint. |
|
|
Fit Symbol |
Displays designed fit. Click Change to display the Limits and Fits Mechanical Calculator, where you can change fit values. |
|
Fundamental Deviations |
To adapt limit deviations, clear the Specify manually check box. |
|
Max. Assembly Clearance |
Maximal value of a connection clearance. |
|
Bolt Properties |
|
|
Material |
Check the check box to open Material Database and select a material. Edit the properties of the material, if needed. |
|
Allowable Pressure 0.25 *Sy |
Specifies a value you enter or select from the list according to the joint character for the allowable pressure in the joint. |
|
Number of Joint Bolts |
Specifies the number of joint bolts. |
|
Joint Properties |
|
|
Type of Loading |
Specifies the Type of loading you select from the roll-down menu. |
|
Material |
Select the check box to open the Material Database and select a material. Edit the properties of the material, if needed. |
|
Allowable Pressure |
Specifies a value you enter or select from the list according to the joint character for the allowable pressure in the joint. |
|
Elasticity Module |
Specifies the material, such as steel, aluminum, or a custom value. |
Results
Displays the calculated values and the joint strength check.
Displays the reports about calculations. To open the Summary of Messages area at the bottom of the tab, double-click the double line at the bottom of tabs or click the chevron.
Summary of Messages area
Displays the reports about calculations. To open the Summary of Messages area at the bottom of the tab, double-click the double line at the bottom of tabs or click the chevron.