#include <notetrck.h>

Inheritance diagram for DefNoteTrack:

Public Member Functions
	DefNoteTrack ()

CoreExport	DefNoteTrack (DefNoteTrack &n)

DefNoteTrack &	operator= (DefNoteTrack &track)

CoreExport void	HoldTrack ()

Class_ID	ClassID ()
	Retrieves a constant that uniquely identifies the plugin class. More...

virtual void	GetClassName (MSTR &s, bool localized=true) const override
	Retrieves the name of the plugin class. More...

int	NumKeys ()

TimeValue	GetKeyTime (int index)

CoreExport void	MapKeys (TimeMap *map, DWORD flags)

CoreExport void	DeleteKeys (DWORD flags)

CoreExport void	CloneSelectedKeys (BOOL offset)

CoreExport void	DeleteTime (Interval iv, DWORD flags)

CoreExport void	ReverseTime (Interval iv, DWORD flags)

CoreExport void	ScaleTime (Interval iv, float s)

CoreExport void	InsertTime (TimeValue ins, TimeValue amount)

CoreExport void	AddNewKey (TimeValue t, DWORD flags)

CoreExport int	GetSelKeyCoords (TimeValue &t, float &val, DWORD flags)

CoreExport void	SetSelKeyCoords (TimeValue t, float val, DWORD flags)

CoreExport int	GetTrackVSpace (int lineHeight)

CoreExport BOOL	CanCopyTrack (Interval iv, DWORD flags)

CoreExport BOOL	CanPasteTrack (TrackClipObject *cobj, Interval iv, DWORD flags)

CoreExport TrackClipObject *	CopyTrack (Interval iv, DWORD flags)

CoreExport void	PasteTrack (TrackClipObject *cobj, Interval iv, DWORD flags)

CoreExport Interval	GetTimeRange (DWORD flags)

CoreExport int	HitTestTrack (TrackHitTab &hits, Rect &rcHit, Rect &rcTrack, float zoom, int scroll, DWORD flags)

CoreExport int	PaintTrack (ParamDimensionBase *dim, HDC hdc, Rect &rcTrack, Rect &rcPaint, float zoom, int scroll, DWORD flags)

CoreExport void	SelectKeys (TrackHitTab &sel, DWORD flags)

CoreExport void	SelectKeyByIndex (int i, BOOL sel)

CoreExport int	NumSelKeys ()

CoreExport void	FlagKey (TrackHitRecord hit)

CoreExport int	GetFlagKeyIndex ()

CoreExport BOOL	IsAnimated ()

CoreExport void	EditTrackParams (TimeValue t, ParamDimensionBase dim, const MCHAR pname, HWND hParent, IObjParam *ip, DWORD flags)

CoreExport int	TrackParamsType ()

CoreExport BOOL	SupportTimeOperations ()

CoreExport IOResult	Save (ISave *isave)
	Called for saving data. More...

CoreExport IOResult	Load (ILoad *iload)
	Called for loading data. More...

CoreExport void	DeleteThis ()
	Deletes an instance of this class. More...

RefResult	NotifyRefChanged (const Interval &changeInt, RefTargetHandle hTarget, PartID &partID, RefMessage message, BOOL propagate)
	Receives and responds to messages. More...

CoreExport RefTargetHandle	Clone (RemapDir &remap)
	This method is used by 3ds Max to clone an object. More...

Public Member Functions inherited from NoteTrack
SClass_ID	SuperClassID ()
	Retrieves a constant representing the type of the plugin. More...

Public Member Functions inherited from ReferenceTarget
virtual BOOL	IsRefTarget ()
	Checks if this is a ReferenceTarget. More...

CoreExport RefResult	TestForLoop (const Interval &refInterval, RefMakerHandle hmaker)
	Tests for a cyclical reference. More...

CoreExport BOOL	HasDependents ()
	Checks if a ReferenceTarget has references. More...

CoreExport BOOL	HasRealDependents ()
	Checks if this has Real (Strong) Dependents. More...

void	BeginDependencyTest ()
	Starts Dependency Test. More...

BOOL	EndDependencyTest ()
	Ends Dependency Test. More...

virtual void	RefAdded (RefMakerHandle rm)
	Called after a reference is made to a target. More...

virtual void	RefAddedUndoRedo (RefMakerHandle rm)
	Called after a reference is made to a target because of undo or redo. More...

virtual void	RefDeleted ()
	Called after a references to this is deleted. More...

virtual void	RefDeletedUndoRedo ()
	Called after a references to this is deleted because of undo or redo. More...

CoreExport RefResult	DeleteAllRefsToMe ()
	Deletes all references to this ReferenceTarget. More...

CoreExport RefResult	TransferReferences (RefTargetHandle oldTarget, BOOL delOld=FALSE)
	Transfers all the references from oldTarget to this. More...

CoreExport int	DoEnumDependents (DependentEnumProc *dep)
	Begins an enumeration that searches back in the dependency network. More...

virtual CoreExport void	BaseClone (ReferenceTarget from, ReferenceTarget to, RemapDir &remap)
	This method copies base class data from an object to its clone. More...

virtual CoreExport RefResult	NotifyDependents (const Interval &changeInt, PartID partID, RefMessage message, SClass_ID sclass=NOTIFY_ALL, BOOL propagate=TRUE, RefTargetHandle hTarg=NULL, NotifyDependentsOption notifyDependentsOption=REFNOTIFY_ALLOW_OPTIMIZATIONS)
	Notify all dependent RefMakers concerned with the message. More...

void	FlagDependents (TimeValue t, PartID which=PART_PUT_IN_FG)
	This sends the REFMSG_FLAGDEPENDENTS message up the pipeline. More...

virtual void	NotifyForeground (TimeValue t)
	This method is called to flag dependents into the FG. More...

virtual void	NotifyTarget (int message, ReferenceMaker *hMaker)
	Sends messages to ReferenceTargets. More...

virtual CoreExport void *	GetInterface (ULONG id)
	Inherited from Animatable. More...

virtual CoreExport BaseInterface *	GetInterface (Interface_ID id)
	Inherited from Animatable. More...

CoreExport	ReferenceTarget ()
	Constructor. More...

virtual CoreExport RefResult	AutoDelete ()
	Deletes the object when it has no more real dependents. More...

CoreExport RefResult	MaybeAutoDelete ()
	Deletes the object when it has no more real dependents. More...

Public Member Functions inherited from ReferenceMaker
CoreExport RefResult	ReplaceReference (int which, RefTargetHandle newtarg, BOOL delOld=TRUE)
	Used when cloning reference makers. More...

CoreExport RefResult	DeleteAllRefsFromMe ()
	Deletes all references from this ReferenceMaker. More...

CoreExport RefResult	DeleteAllRefs ()
	Deletes all references both to and from this item. More...

CoreExport RefResult	DeleteReference (int i)
	Deletes the specified reference. More...

virtual BOOL	CanTransferReference (int i)
	Tells whether this reference can be transfered. More...

CoreExport ReferenceSaveManager &	GetReferenceSaveManager ()
	Access the ReferenceSaveManager of this ReferenceMaker. More...

virtual int	RemapRefOnLoad (int iref)
	Used to load old files with references. More...

virtual CoreExport void	RescaleWorldUnits (float f)
	Rescale size of all world units in reference hierarchy. More...

virtual CoreExport void	EnumAuxFiles (AssetEnumCallback &assetEnum, DWORD flags)
	Enumerate auxiliary files (e.g. bitmaps) More...

virtual CoreExport void	SaveEnum (SaveEnumProc &sep, BOOL isNodeCall=0)
	The default save enumeration. More...

virtual CoreExport bool	SpecifySaveReferences (ReferenceSaveManager &referenceSaveManager)
	Used to specify reference slot remapping during scene file save. More...

CoreExport int	DoEnumDependents (DependentEnumProc *dep)
	Begins an enumeration that searches back in the dependency network. More...

CoreExport bool	EnumRefHierarchy (RefEnumProc &proc, bool includeCustAttribs=true, bool includeIndirectRefs=true, bool includeNonPersistentRefs=true, bool preventDuplicatesViaFlag=true)
	This method provides a general purpose reference enumerator. More...

CoreExport int	FindRef (RefTargetHandle rtarg)
	Get the index of the ReferenceTarget. More...

virtual BOOL	IsRefMaker ()
	Tells whether it is a ReferenceMaker. More...

virtual BOOL	IsRealDependency (ReferenceTarget *rtarg)
	Returns whether this is a "real" (strong) dependency or not. More...

virtual BOOL	ShouldPersistWeakRef (RefTargetHandle rtarg)
	Specifies whether a weak reference is to be persisted on a partial load or save. More...

CoreExport	ReferenceMaker ()
	Constructor. More...

CoreExport void	DeleteMe ()
	Deletes an instance of this class. More...

virtual CoreExport int	NumRefs ()
	Returns the total number of references this ReferenceMaker can hold. More...

virtual CoreExport RefTargetHandle	GetReference (int i)
	Returns the 'i-th' reference. More...

Public Member Functions inherited from Animatable
virtual void	FreeCaches ()

virtual int	NumChildren ()

virtual Animatable *	ChildAnim (int i)

virtual CoreExport MSTR	NodeName ()

virtual void	EditTrack ()

virtual CoreExport BOOL	SubAnimSetKeyBufferPresent (int subNum)
	returns true if the sub-anim has a "Set Key" buffer present More...

virtual BOOL	SetKeyBufferPresent ()
	returns true if there is a "Set Key" buffer present More...

virtual CoreExport void	SubAnimCommitSetKeyBuffer (TimeValue t, int subNum)
	Commit any "Set Key" buffers on the given sub-anim. More...

virtual void	CommitSetKeyBuffer (TimeValue t)
	Commit any "Set Key" buffers. More...

virtual CoreExport void	SubAnimRevertSetKeyBuffer (int subNum)
	Revert any "Set Key" buffers on the given sub-anim. More...

virtual void	RevertSetKeyBuffer ()
	Revert any "Set Key" buffers. More...

virtual LRESULT CALLBACK	TrackViewWinProc (HWND hwnd, UINT message, WPARAM wParam, LPARAM lParam)
	This function is obsolete. More...

virtual bool	IsParamBlockDesc2Used (ParamBlockDesc2 *desc)
	Returns true if the passed description is being used. More...

virtual bool	GetMacroRecorderName (bool used_as_rhs_value, MSTR &objectSpecifiedName)
	This method is called to access the object specified name to use for the Maxscript macrorecorder. More...

CoreExport	Animatable ()
	Constructor. More...

virtual void	GetClassName (MSTR &s) MAX_SEALED

MSTR	ClassName (bool localized=true) const
	Returns the name of the plugin class. More...

virtual void	BeginEditParams (IObjParam ip, ULONG flags, Animatable prev=NULL)

virtual void	EndEditParams (IObjParam ip, ULONG flags, Animatable next=NULL)

virtual CoreExport void	ReleaseInterface (ULONG id, void *i)

virtual CoreExport int	SetProperty (ULONG id, void *data)

virtual CoreExport void *	GetProperty (ULONG id)

CoreExport void	AppendProperty (AnimProperty *prop)
	A function to directly add arbitrary properties to this object developers should ensure that the properties ID does not conflict with any Max-specific IDs. More...

CoreExport AnimProperty *	FindProperty (DWORD id)
	Find any property. More...

CoreExport void	AddAppDataChunk (const Class_ID &cid, SClass_ID sid, DWORD sbid, DWORD len, void *data)
	Adds application/plugin specific (custom) data to an Animatable. More...

CoreExport AppDataChunk *	GetAppDataChunk (const Class_ID &cid, SClass_ID sid, DWORD sbid)
	Retrieves the application/plugin specific (custom) data stored with an Animatable. More...

CoreExport BOOL	RemoveAppDataChunk (const Class_ID &cid, SClass_ID sid, DWORD sbid)
	Deletes the application/plugin specific (custom) data stored with an Animatable. More...

CoreExport void	ClearAllAppData ()
	Deletes all application/plugin specific (custom) data stored with an Animatable. More...

virtual int	NumSubs ()

virtual Animatable *	SubAnim (int i)

virtual MSTR	SubAnimName (int i) MAX_SEALED

virtual CoreExport MSTR	SubAnimName (int i, bool localized)

virtual BOOL	CanDeleteSubAnim (int i)

virtual void	DeleteSubAnim (int i)

virtual DWORD	GetSubAnimCurveColor (int subNum)

virtual int	SubNumToRefNum (int subNum)

virtual BOOL	CanCopyAnim ()

CoreExport int	HasSubElements (int type=0)

virtual int	GetSubFCurveExtents (int subNum, ParamDimensionBase *dim, float &min, float &max, DWORD flags)
	The values max and min should be initialized before calling this function. More...

virtual ParamDimension *	GetParamDimension (int i)

virtual BOOL	SelectSubAnim (int subNum)

virtual BOOL	BypassTreeView ()

virtual BOOL	BypassTrackBar ()

virtual BOOL	BypassPropertyLevel ()

virtual BOOL	InvisibleProperty ()

virtual int	GetKeyIndex (TimeValue t)

virtual BOOL	GetNextKeyTime (TimeValue t, DWORD flags, TimeValue &nt)

virtual void	CopyKeysFromTime (TimeValue src, TimeValue dst, DWORD flags)

virtual void	DeleteKeyAtTime (TimeValue t)

virtual BOOL	IsKeyAtTime (TimeValue t, DWORD flags)

virtual int	GetKeyTimes (Tab< TimeValue > &times, Interval range, DWORD flags)

virtual int	GetKeySelState (BitArray &sel, Interval range, DWORD flags)

CoreExport void	OpenTreeEntry (int type, DWORD tv)

CoreExport void	CloseTreeEntry (int type, DWORD tv)

CoreExport int	IsTreeEntryOpen (int type, DWORD tv)

CoreExport BOOL	GetSelInTrackView (DWORD tv)

CoreExport void	SetSelInTrackView (DWORD tv, BOOL sel)

CoreExport BOOL	InTrackViewSelSet (int which)

CoreExport void	SetTrackViewSelSet (int which, BOOL inOut)

virtual BOOL	AssignController (Animatable *control, int subAnim)

virtual BOOL	CanAssignController (int subAnim)
	Return true if we can reassign the subanim specified. More...

virtual BOOL	CanMakeUnique ()

CoreExport int	EnumAnimTree (AnimEnum animEnum, Animatable client, int subNum)

virtual int	RenderBegin (TimeValue t, ULONG flags=0)

virtual int	RenderEnd (TimeValue t)

virtual void	EditTimeRange (Interval range, DWORD flags)

virtual void	DeleteKeyByIndex (int index)

virtual void	SelectSubKeys (int subNum, TrackHitTab &sel, DWORD flags)

virtual void	SelectSubCurve (int subNum, BOOL sel)

virtual BOOL	IsKeySelected (int i)

virtual void	MoveKeys (ParamDimensionBase *dim, float delta, DWORD flags)

virtual void	ScaleKeyValues (ParamDimensionBase *dim, float origin, float scale, DWORD flags)

virtual void	SelectCurve (BOOL sel)

virtual BOOL	IsCurveSelected ()
	Returns TRUE if the function curve is selected; otherwise returns FALSE. More...

virtual BOOL	IsSubCurveSelected (int subNum)
	Returns the selected state of the sub-curve whose index is passed. More...

virtual int	SetSelKeyCoordsExpr (ParamDimension dim, const MCHAR timeExpr, const MCHAR *valExpr, DWORD flags)

virtual void	AdjustTangents (TrackHitRecord hit, ParamDimensionBase *dim, Rect &rcGraph, float tzoom, int tscroll, float vzoom, int vscroll, int dx, int dy, DWORD flags)

virtual void	AdjustTangents (TrackHitRecord hit, ParamDimensionBase *dim, float angle, float length, DWORD flags)

virtual BOOL	CanCopySubTrack (int subNum, Interval iv, DWORD flags)

virtual BOOL	CanPasteSubTrack (int subNum, TrackClipObject *cobj, Interval iv, DWORD flags)

virtual TrackClipObject *	CopySubTrack (int subNum, Interval iv, DWORD flags)

virtual void	PasteSubTrack (int subNum, TrackClipObject *cobj, Interval iv, DWORD flags)

virtual int	PaintSubTrack (int subNum, ParamDimensionBase *dim, HDC hdc, Rect &rcTrack, Rect &rcPaint, float zoom, int scroll, DWORD flags)

virtual int	PaintFCurves (ParamDimensionBase *dim, HDC hdc, Rect &rcGraph, Rect &rcPaint, float tzoom, int tscroll, float vzoom, int vscroll, DWORD flags)

virtual int	HitTestFCurves (ParamDimensionBase *dim, TrackHitTab &hits, Rect &rcHit, Rect &rcGraph, float tzoom, int tscroll, float vzoom, int vscroll, DWORD flags)

virtual int	PaintSubFCurves (int subNum, ParamDimensionBase *dim, HDC hdc, Rect &rcGraph, Rect &rcPaint, float tzoom, int tscroll, float vzoom, int vscroll, DWORD flags)

virtual int	HitTestSubFCurves (int subNum, ParamDimensionBase *dim, TrackHitTab &hits, Rect &rcHit, Rect &rcGraph, float tzoom, int tscroll, float vzoom, int vscroll, DWORD flags)

virtual int	GetFCurveExtents (ParamDimensionBase *dim, float &min, float &max, DWORD flags)
	This method is called to calculate the largest and smallest values of the anim. More...

CoreExport void	AddNoteTrack (NoteTrack *note)

CoreExport void	DeleteNoteTrack (NoteTrack *note, BOOL delNote=TRUE)

CoreExport BOOL	HasNoteTracks ()

CoreExport int	NumNoteTracks ()

CoreExport NoteTrack *	GetNoteTrack (int i)

virtual void	FreeAllBitmaps ()

virtual void	GetSystemNodes (INodeTab &nodes, SysNodeContext Context)

virtual BOOL	IsSubClassOf (Class_ID classID)
	returns true if the animatable has sub-classed off the given class More...

virtual CoreExport void	MouseCycleCompleted (TimeValue t)

virtual CoreExport void	MouseCycleStarted (TimeValue t)

virtual int	NumParamBlocks ()

virtual IParamBlock2 *	GetParamBlock (int i)

virtual IParamBlock2 *	GetParamBlockByID (short id)

CoreExport bool	SvSaveData (ISave *isave, USHORT id)

CoreExport bool	SvLoadData (ILoad *iLoad)

CoreExport DWORD	SvGetRefIndex ()

CoreExport void	SvSetRefIndex (DWORD i)

CoreExport bool	SvDeleteRefIndex ()

virtual CoreExport SvGraphNodeReference	SvTraverseAnimGraph (IGraphObjectManager gom, Animatable owner, int id, DWORD flags)

CoreExport SvGraphNodeReference	SvStdTraverseAnimGraph (IGraphObjectManager gom, Animatable owner, int id, DWORD flags)

virtual CoreExport bool	SvCanInitiateLink (IGraphObjectManager gom, IGraphNode gNode)

virtual CoreExport bool	SvCanConcludeLink (IGraphObjectManager gom, IGraphNode gNode, IGraphNode *gNodeChild)

virtual CoreExport MSTR	SvGetName (IGraphObjectManager gom, IGraphNode gNode, bool isBeingEdited)

virtual CoreExport bool	SvCanSetName (IGraphObjectManager gom, IGraphNode gNode)

virtual CoreExport bool	SvSetName (IGraphObjectManager gom, IGraphNode gNode, const MSTR &name)

virtual CoreExport bool	SvCanRemoveThis (IGraphObjectManager gom, IGraphNode gNode)

virtual CoreExport bool	SvRemoveThis (IGraphObjectManager gom, IGraphNode gNode)
	Called when the user deletes this object in the schematic view... More...

virtual CoreExport bool	SvIsSelected (IGraphObjectManager gom, IGraphNode gNode)
	Returns true if the object is selected in its schematic view. More...

virtual CoreExport bool	SvIsHighlighted (IGraphObjectManager gom, IGraphNode gNode)

virtual CoreExport COLORREF	SvHighlightColor (IGraphObjectManager gom, IGraphNode gNode)

virtual CoreExport COLORREF	SvGetSwatchColor (IGraphObjectManager gom, IGraphNode gNode)

virtual CoreExport bool	SvIsInactive (IGraphObjectManager gom, IGraphNode gNode)

virtual CoreExport bool	SvLinkChild (IGraphObjectManager gom, IGraphNode gNodeThis, IGraphNode *gNodeChild)

virtual CoreExport bool	SvHandleDoubleClick (IGraphObjectManager gom, IGraphNode gNode)

virtual CoreExport MultiSelectCallback *	SvGetMultiSelectCallback (IGraphObjectManager gom, IGraphNode gNode)

virtual CoreExport bool	SvCanSelect (IGraphObjectManager gom, IGraphNode gNode)

virtual CoreExport bool	SvEditProperties (IGraphObjectManager gom, IGraphNode gNode)

virtual CoreExport MSTR	SvGetTip (IGraphObjectManager gom, IGraphNode gNode)

virtual CoreExport MSTR	SvGetRefTip (IGraphObjectManager gom, IGraphNode gNode, IGraphNode *gNodeMaker)

virtual CoreExport bool	SvCanDetach (IGraphObjectManager gom, IGraphNode gNode)

virtual CoreExport bool	SvDetach (IGraphObjectManager gom, IGraphNode gNode)

virtual CoreExport MSTR	SvGetRelTip (IGraphObjectManager gom, IGraphNode gNodeTarget, int id, IGraphNode *gNodeMaker)
	Returns a string to be displayed in the tip window in the schematic view for a relationship from "gNodeMaker" to "gNodeTarget"... More...

virtual CoreExport bool	SvCanDetachRel (IGraphObjectManager gom, IGraphNode gNodeTarget, int id, IGraphNode *gNodeMaker)
	Returns true if this object can respond to the SvDetachRel(...) method... More...

virtual CoreExport bool	SvDetachRel (IGraphObjectManager gom, IGraphNode gNodeTarget, int id, IGraphNode *gNodeMaker)
	Detach this relationship. More...

virtual CoreExport bool	SvHandleRelDoubleClick (IGraphObjectManager gom, IGraphNode gNodeTarget, int id, IGraphNode *gNodeMaker)
	Called when this relationship is double-clicked in the schematic view... More...

CoreExport ICustAttribContainer *	GetCustAttribContainer ()
	This method returns a pointer to the custom attributes container interface class. More...

CoreExport void	AllocCustAttribContainer ()
	This method allocates space for a custom attributes container. More...

CoreExport void	DeleteCustAttribContainer ()
	This method deletes space used by a custom attributes container. More...

void	SetAFlag (DWORD mask)

void	ClearAFlag (DWORD mask)
	Clears one or more bits in the Animatable flags. More...

bool	TestAFlag (DWORD mask) const
	Tests one or more bits in the Animatable flags. More...

void	SetAFlagEx (DWORD mask)
	Sets one or more bits in the Animatable extended flags. More...

void	ClearAFlagEx (DWORD mask)
	Clears one or more bits in the Animatable extended flags. More...

bool	TestAFlagEx (DWORD mask) const
	Tests one or more bits in the Animatable extended flags. More...

CoreExport bool	TestFlagBit (int index)
	Tests the specified flag bit. More...

CoreExport void	SetFlagBit (int index, bool newValue=true)
	Sets the specified flag bit. More...

CoreExport void	ClearFlagBit (int index)
	Clears the specified flag bit. More...

Public Member Functions inherited from InterfaceServer
virtual UtilExport	~InterfaceServer ()
	Destructor. More...

template<class InterfaceType >
InterfaceType *	GetTypedInterface ()

Public Attributes
NoteKeyTab	keys

MSTR	trackName

Additional Inherited Members
Static Public Member Functions inherited from Animatable
static CoreExport BOOL	IsDeleted (Animatable *anim)
	Debug method to determine whether an object has been deleted. More...

static CoreExport AnimHandle	GetHandleByAnim (Animatable *anim)
	Get the unique handle for an Animatable object. More...

static CoreExport Animatable *	GetAnimByHandle (AnimHandle handle)
	Get an Animatable object from its unique handle. More...

static CoreExport AnimHandle	GetNextHandle ()
	Get the unique handle for the next Animatable object to be created. More...

static CoreExport void	EnumerateAllAnimatables (EnumAnimList &enumProcObject)
	Enumerator to enumerate across all animatables. More...

static CoreExport bool	RegisterAppDataLoadCallback (const Class_ID &cid, SClass_ID sid, APPDATALOADPROC proc)
	Registers a callback proc that is called when an AppDataChunk is read from a scene file. More...

static CoreExport bool	UnRegisterAppDataLoadCallback (const Class_ID &cid, SClass_ID sid, APPDATALOADPROC proc)
	Unregisters a callback proc that is called when an AppDataChunk is read from a scene file. More...

static CoreExport bool	RegisterAppDataLoadCallback (DWORD sbid, APPDATALOADPROC proc)
	Registers a callback proc that is called when an AppDataChunk is read from a scene file. More...

static CoreExport bool	UnRegisterAppDataLoadCallback (DWORD sbid, APPDATALOADPROC proc)
	Unregisters a callback proc that is called when an AppDataChunk is read from a scene file. More...

static CoreExport int	RequestFlagBit ()
	Requests an unique flag bit index. More...

static CoreExport void	ReleaseFlagBit (int index)
	Releases the flag bit index. More...

static CoreExport void	ClearFlagBitInAllAnimatables (int index)
	Clears the specified flag bit in all Animatables. More...

Static Public Member Functions inherited from MaxHeapOperators
static UtilExport void *	operator new (size_t size)
	Standard new operator used to allocate objects If there is insufficient memory, an exception will be thrown. More...

static UtilExport void *	operator new (size_t size, const std::nothrow_t &e)
	Standard new operator used to allocate objects if there is insufficient memory, NULL will be returned. More...

static UtilExport void *	operator new (size_t size, const char *filename, int line)
	New operator used to allocate objects that takes the filename and line number where the new was called If there is insufficient memory, an exception will be thrown. More...

static UtilExport void *	operator new (size_t size, int block_type, const char *filename, int line)
	New operator used to allocate objects that takes the type of memory, filename and line number where the new was called If there is insufficient memory, an exception will be thrown. More...

static UtilExport void *	operator new (size_t size, const std::nothrow_t &e, const char *filename, int line)
	New operator used to allocate objects that takes the filename and line number where the new was called If there is insufficient memory, NULL will be returned. More...

static UtilExport void *	operator new (size_t size, unsigned long flags)
	New operator used to allocate objects that takes extra flags to specify special operations If there is insufficient memory, an exception will be thrown. More...

static UtilExport void *	operator new (size_t size, const std::nothrow_t &e, unsigned long flags)
	New operator used to allocate objects that takes extra flags to specify special operations If there is insufficient memory, NULL will be returned. More...

static UtilExport void *	operator new[] (size_t size)
	New operator used to allocate arrays of objects If there is insufficient memory, an exception will be thrown. More...

static UtilExport void *	operator new[] (size_t size, const std::nothrow_t &e)
	New operator used to allocate arrays of objects If there is insufficient memory, NULL will be returned. More...

static UtilExport void *	operator new[] (size_t size, const char *filename, int line)
	New operator used to allocate arrays of objects If there is insufficient memory, an exception will be thrown. More...

static UtilExport void *	operator new[] (size_t size, int block_type, const char *filename, int line)
	New operator used to allocate arrays of objects. More...

static UtilExport void *	operator new[] (size_t size, const std::nothrow_t &e, const char *filename, int line)
	New operator used to allocate arrays of objects If there is insufficient memory, NULL will be returned. More...

static UtilExport void *	operator new[] (size_t size, unsigned long flags)
	New operator used to allocate arrays of objects If there is insufficient memory, an exception will be thrown. More...

static UtilExport void *	operator new[] (size_t size, const std::nothrow_t &e, unsigned long flags)
	New operator used to allocate arrays of objects If there is insufficient memory, NULL will be returned. More...

static UtilExport void	operator delete (void *ptr)
	Standard delete operator used to deallocate an object If the pointer is invalid, an exception will be thrown. More...

static UtilExport void	operator delete (void *ptr, const std::nothrow_t &e)
	Standard delete operator used to deallocate an object If the pointer is invalid, nothing will happen. More...

static UtilExport void	operator delete (void ptr, const char filename, int line)
	Delete operator used to deallocate an object that takes the filename and line number where the delete was called If the pointer is invalid, an exception will be thrown. More...

static UtilExport void	operator delete (void ptr, int block_type, const char filename, int line)
	Delete operator used to deallocate an object that takes the type of memory, filename and line number where the delete was called If the pointer is invalid, an exception will be thrown. More...

static UtilExport void	operator delete (void ptr, const std::nothrow_t &e, const char filename, int line)
	Delete operator used to deallocate an object that takes the filename and line number where the delete was called If the pointer is invalid, nothing will happen. More...

static UtilExport void	operator delete (void *ptr, unsigned long flags)
	Delete operator used to deallocate an object that takes extra flags to specify special operations If the pointer is invalid, an exception will be thrown. More...

static UtilExport void	operator delete (void *ptr, const std::nothrow_t &e, unsigned long flags)
	Delete operator used to deallocate an object that takes extra flags to specify special operations If the pointer is invalid, nothing will happen. More...

static UtilExport void	operator delete[] (void *ptr)
	Standard delete operator used to deallocate an array of objects If the pointer is invalid, an exception will be thrown. More...

static UtilExport void	operator delete[] (void *ptr, const std::nothrow_t &e)
	Standard delete operator used to deallocate an array of objects If the pointer is invalid, nothing will happen. More...

static UtilExport void	operator delete[] (void ptr, const char filename, int line)
	Delete operator used to deallocate an array of objects that takes the filename and line number where the delete was called If the pointer is invalid, an exception will be thrown. More...

static UtilExport void	operator delete[] (void ptr, int block_type, const char filename, int line)
	Delete operator used to deallocate an array of objects that takes the type of memory, filename and line number where the delete was called If the pointer is invalid, an exception will be thrown. More...

static UtilExport void	operator delete[] (void ptr, const std::nothrow_t &e, const char filename, int line)
	Delete operator used to deallocate an array of objects that takes the filename and line number where the delete was called If the pointer is invalid, nothing will happen. More...

static UtilExport void	operator delete[] (void *ptr, unsigned long flags)
	Delete operator used to deallocate an array of objects that takes extra flags to specify special operations If the pointer is invalid, an exception will be thrown. More...

static UtilExport void	operator delete[] (void *ptr, const std::nothrow_t &e, unsigned long flags)
	Delete operator used to deallocate an array of objects that takes extra flags to specify special operations If the pointer is invalid, an exception will be thrown. More...

static UtilExport void *	operator new (size_t size, void *placement_ptr)
	Placement new operator. More...

static UtilExport void	operator delete (void ptr, void placement_ptr)
	Placement delete operator. More...

static UtilExport void *	aligned_malloc (size_t size, size_t alignment)
	Allocates memory on a specified alignment boundary. More...

static UtilExport void *	aligned_realloc (void *ptr, size_t size, size_t alignment)
	Reallocates memory on a specified alignment boundary. More...

static UtilExport void	aligned_free (void *ptr)
	Frees a block of memory that was allocated with aligned_malloc/aligned_realloc. More...

Static Public Attributes inherited from Animatable
static const AnimHandle	kInvalidAnimHandle = 0

Protected Member Functions inherited from ReferenceTarget
virtual CoreExport int	DoEnumDependentsImpl (DependentEnumProc *dep)
	Method to perform an enumeration on a ReferenceTarget. More...

virtual CoreExport	~ReferenceTarget ()=0
	Destructor. More...

Protected Member Functions inherited from ReferenceMaker
virtual CoreExport	~ReferenceMaker ()=0
	Destructor. More...

virtual CoreExport void	SetReference (int i, RefTargetHandle rtarg)
	Stores a ReferenceTarget as its 'i-th' reference`. More...

void	BlockEval ()
	Validates a given reference link between this reference maker and its reference target. More...

void	UnblockEval ()
	Validates a given reference link between this reference maker and its reference target. More...

int	Evaluating ()
	Validates a given reference link between this reference maker and its reference target. More...

CoreExport RefResult	StdNotifyRefChanged (const Interval &changeInt, RefTargetHandle hTarget, PartID partID, RefMessage message, BOOL propagate, NotifyDependentsOption notifyDependentsOption)
	Validates a given reference link between this reference maker and its reference target. More...

Protected Member Functions inherited from Animatable
virtual CoreExport	~Animatable ()=0
	Destructor. More...

Protected Member Functions inherited from Noncopyable
	Noncopyable ()

	~Noncopyable ()

Protected Attributes inherited from Animatable
DWORD	aflag

AnimPropertyList	aprops

Detailed Description

See also: Class NoteKeyTab, Class Animatable.

Description:: This class is 3ds Max's implementation of Note Tracks. It provides implementation for the Animatable methods that let the keys work in Track View. Developers use this class to access the table of keys associated with a track. Methods of class Animatable are available to get access to this class.

Constructor & Destructor Documentation

◆ DefNoteTrack() [1/2]

DefNoteTrack ( )

inline

151 {}

◆ DefNoteTrack() [2/2]

CoreExport DefNoteTrack ( DefNoteTrack & n )

Member Function Documentation

◆ operator=()

DefNoteTrack& operator= ( DefNoteTrack & track )

inline

153 {keys=track.keys;return *this;}

DefNoteTrack::keys

NoteKeyTab keys

Definition: notetrck.h:148

track

controller mat max min numsubs x z controller keys x z controller keys x z angle controller keys x_rotation z_rotation axis isAnimated track

Definition: generics.inl:260

◆ HoldTrack()

CoreExport void HoldTrack ( )

◆ ClassID()

Class_ID ClassID ( )

inlinevirtual

Retrieves a constant that uniquely identifies the plugin class.

This method must return the unique ID for the plugin class. If two ClassIDs conflict, the system will only load the first conflicting one it finds. A program (gencid.exe) is provided to generate unique class id values.

Returns: A class id that uniquely identifies a plugin class

See also: Class ClassID, class ID definitions in plugapi.h.

Reimplemented from Animatable.

156 {return Class_ID(NOTETRACK_CLASS_ID,0);}

Class_ID

Definition: maxtypes.h:154

NOTETRACK_CLASS_ID

#define NOTETRACK_CLASS_ID

Definition: plugapi.h:378

◆ GetClassName()

virtual void GetClassName	(	MSTR &	s,
		bool	localized = `true`
	)		const

inlineoverridevirtual

Retrieves the name of the plugin class.

This name is used in 3ds Max's UI and in MAXScript. For Material plug-ins this method is used to put up the material "type" name in the Material Editor.

Parameters

s	Reference to a string filled in with the name of the plugin class.
localized	If true, then the class name returned should be localized in the language 3ds Max is currently using. Otherwise it should be the class name in English. If a plugin does not provide localized string resources, it can disregard this parameter and always return the class name in English.

Reimplemented from ReferenceTarget.

157 { UNUSED_PARAM(localized); s = _M("DefNoteTrack"); } // From Animatable

UNUSED_PARAM

#define UNUSED_PARAM(x)

Definition: BuildWarnings.h:18

_M

#define _M(x)

Used to wrap string literals.

Definition: strbasic.h:67

◆ NumKeys()

int NumKeys ( )

inlinevirtual

Remarks: This method returns the number of keys managed by the plug-in, or NOT_KEYFRAMEABLE if it does not work with keys.

Default Implementation:: {return NOT_KEYFRAMEABLE;}

Reimplemented from Animatable.

160 {return keys.Count();}

Tab::Count

int Count() const

Retrieves the number of items in the Tab.

Definition: tab.h:219

◆ GetKeyTime()

TimeValue GetKeyTime ( int index )

inlinevirtual

Remarks: This method returns the time of the key specified by index.

Parameters

index Specifies the key whose time should be returned.

Default Implementation:: {return 0;}

Reimplemented from Animatable.

161 {return keys[index]->time;}

◆ MapKeys()

CoreExport void MapKeys	(	TimeMap *	map,
		DWORD	flags
	)

virtual

Remarks: The method is called to update the keys specified by the flags, using the TimeMap passed. The plug-in should go through the specified keys and change their time to TimeMap::map(time). See the sample code below for how this is done.

Parameters

map Point to instance of Class TimeMap.

flags The flags indicate the keys to operate on. One or more of the following values:

TRACK_DOSEL
Selected keys only.

TRACK_DOALL
All the keys, ignore their selection state.

TRACK_SLIDEUNSEL
Slide unselected keys to the right. Keys are slid by the amount the last key was transformed.

TRACK_RIGHTTOLEFT
Enumerate right to left. If TRACK_SLIDEUNSEL is set, keys will slide to the left.

TRACK_DOSUBANIMS
Sub-Animatables keys as well.

TRACK_DOCHILDNODES
Child Nodes keys as well

TRACK_MAPRANGE
The range, if not locked to first and last key, should be mapped as well.

Sample Code:: template <class KT>

void GenMorphCont<KT>::MapKeys(TimeMap *map,DWORD flags )

{

if(GetLocked()==false)

{

int n = keys.Count();

BOOL changed = FALSE;

if (!n) return;

HoldTrack();

if (flags&TRACK_DOALL) {

for (int i=0; i<n; i++) {

keys[i].time = map->map(keys[i].time);

changed = TRUE;

}

} else

if (flags&TRACK_DOSEL) {

TimeValue mappedRangeStart = 0;

TimeValue mappedRangeEnd = 0;

TimeValue duration = 0;

// When using either the "Replace" or the "Insert" options, compute the selected keys' time range.

if ( flags&(TRACK_REPLACEKEYS|TRACK_INSERTKEYS) ) {

Interval iv = GetTimeRange(TIMERANGE_SELONLY);

mappedRangeStart = map->map( iv.Start() );

mappedRangeEnd = map->map( iv.End() );

// Add a frame to the insert buffer so that we don't delete a key that would be right at the insertion

// point (because it would otherwise become coincident with the last key of the selected keys buffer).

if ( flags&TRACK_INSERTKEYS )

duration = iv.End() - iv.Start() + GetTicksPerFrame();

}

BOOL slide = flags&TRACK_SLIDEUNSEL;

TimeValue delta = 0, prev;

int start, end, inc;

if (flags&TRACK_RIGHTTOLEFT) {

start = n-1;

end = -1;

inc = -1;

} else {

start = 0;

end = n;

inc = 1;

}

for (int i = start; i!=end; i+=inc) {

if (keys[i].TestFlag(KEY_SELECTED)) {

prev = keys[i].time;

keys[i].time = map->map(keys[i].time);

delta = keys[i].time - prev;

changed = TRUE;

} else if (slide) {

keys[i].time += delta;

} else if (flags&TRACK_INSERTKEYS)

// When using the Insert option and the current key time is on, or beyond selected keys'

// insertion point, add the length of the selected keys' buffer.

if ( keys[i].time >= mappedRangeStart )

keys[i].time += duration;

}

// If the Replace option is on, remove all unselected keys within the range of currently selected keys.

// Note: there's no point doing this when the Slide or Insert options are used because unselected keys

// have already been moved out of the interval.

if ( flags&TRACK_REPLACEKEYS && !(slide || flags&TRACK_INSERTKEYS) ) {

// Delete any unselected key within the selected keys interval

// Note: unfortunately, we can't use FindKeyIndex to optimize the loop

// because mapped (i.e. selected) keys have not been sorted yet.

for ( int i = n-1; i >= 0; i-- ) {

if ( !keys[i].TestFlag(KEY_SELECTED) && keys[i].time <= mappedRangeEnd ) {

if ( keys[i].time < mappedRangeStart )

break;

keys.Delete(i, 1);

}

}

}

}

if (flags&TRACK_MAPRANGE && keys.TestFlag(RANGE_UNLOCKED)) {

TimeValue t0 = map->map(keys.range.Start());

TimeValue t1 = map->map(keys.range.End());

keys.range.Set(t0,t1);

}

if (changed) {

keys.Invalidate();

Invalidate();

NotifyDependents(FOREVER, PART_ALL, REFMSG_CHANGE);

}

}

}

TRACK_DOSEL
#define TRACK_DOSEL
Definition: TrackFlags.h:14

TRACK_SLIDEUNSEL
#define TRACK_SLIDEUNSEL
Definition: TrackFlags.h:16

TRACK_MAPRANGE
#define TRACK_MAPRANGE
Definition: TrackFlags.h:20

TRACK_INSERTKEYS
#define TRACK_INSERTKEYS
Definition: TrackFlags.h:22

TIMERANGE_SELONLY
#define TIMERANGE_SELONLY
Definition: TrackFlags.h:47

TRACK_DOALL
#define TRACK_DOALL
Definition: TrackFlags.h:15

TRACK_REPLACEKEYS
#define TRACK_REPLACEKEYS
Definition: TrackFlags.h:23

TRACK_RIGHTTOLEFT
#define TRACK_RIGHTTOLEFT
Definition: TrackFlags.h:17

DefNoteTrack::GetTimeRange
CoreExport Interval GetTimeRange(DWORD flags)

DefNoteTrack::HoldTrack
CoreExport void HoldTrack()

Interval
Definition: interval.h:36

Interval::Start
TimeValue Start() const
Definition: interval.h:134

Interval::End
TimeValue End() const
Definition: interval.h:136

ReferenceTarget::NotifyDependents
virtual CoreExport RefResult NotifyDependents(const Interval &changeInt, PartID partID, RefMessage message, SClass_ID sclass=NOTIFY_ALL, BOOL propagate=TRUE, RefTargetHandle hTarg=NULL, NotifyDependentsOption notifyDependentsOption=REFNOTIFY_ALLOW_OPTIMIZATIONS)
Notify all dependent RefMakers concerned with the message.

Tab::Delete
int Delete(int start, int num)
Deletes items from the Tab.
Definition: tab.h:290

TimeMap
Definition: TimeMap.h:19

TimeMap::map
virtual TimeValue map(TimeValue t)=0

REFMSG_CHANGE
#define REFMSG_CHANGE
Sent to dependents of a ReferenceTarget that has changed in some way.
Definition: ref.h:251

PART_ALL
const PartID PART_ALL
Combination of ALL_CHANNELS and PART_TM.
Definition: ref.h:92

FOREVER
#define FOREVER
Definition: interval.h:168

TimeValue
int TimeValue
Definition: maxtypes.h:118

GetTicksPerFrame
CoreExport int GetTicksPerFrame()

Reimplemented from Animatable.

◆ DeleteKeys()

CoreExport void DeleteKeys ( DWORD flags )

virtual

Remarks: This method is called to delete keys, as specified by the flags passed.

Parameters

flags One or more of the following values:

TRACK_DOSEL
Delete selected keys only.

TRACK_DOALL
Delete all keys (ignore selection state).

TRACK_SLIDEUNSEL
Slide unselected keys to the right.

TRACK_RIGHTTOLEFT
Enumerate right to left. If TRACK_SLIDEUNSEL is set, keys will slide to the left.

Default Implementation:: {}

Reimplemented from Animatable.

◆ CloneSelectedKeys()

CoreExport void CloneSelectedKeys ( BOOL offset )

virtual

Remarks: This method is called to make a copy of the selected keys.

Parameters

offset If TRUE, set the new key time to be centered between the original key and the next key.

Reimplemented from Animatable.

◆ DeleteTime()

CoreExport void DeleteTime	(	Interval	iv,
		DWORD	flags
	)

virtual

Remarks: This method is called to delete the specified interval of time (or the keys within the interval).

Parameters

iv	The interval of time to delete.
flags	One or more of the following values: TIME_INCLEFT Include the left endpoint. TIME_INCRIGHT Include the right endpoint. TIME_NOSLIDE Delete any keys in the interval but don't actually remove the block of time.

Default Implementation:: {}

Reimplemented from Animatable.

◆ ReverseTime()

CoreExport void ReverseTime	(	Interval	iv,
		DWORD	flags
	)

virtual

Remarks: This method is called to reverse the data within the specified interval. For example, if the interval passed is from frame 10 to 20, and there is a key at frame 12, the key should be moved to frame 18. Considered another way, if all the times were normalized, and there was a value n between 0 and 1, n should be changed to 1-n.

Parameters

iv	The interval of time over which to reverse the data.
flags	One or more of the following values: TIME_INCLEFT Include the left endpoint. TIME_INCRIGHT Include the right endpoint.

Default Implementation:: {}

Sample Code:: template <class KT>

void GenMorphCont<KT>::ReverseTime( Interval iv, DWORD flags )

{

if(GetLocked()==false)

{

Interval test = TestInterval(iv,flags);

int n = keys.Count();

HoldTrack();

for (int i = 0; i < n; i++) {

if (test.InInterval(keys[i].time)) {

TimeValue delta = keys[i].time - iv.Start();

keys[i].time = iv.End()-delta;

}

}

keys.Invalidate();

Invalidate();

NotifyDependents(FOREVER, PART_ALL, REFMSG_CHANGE);

}

}

Interval::InInterval
CoreExport int InInterval(const TimeValue t) const

TestInterval
Interval TestInterval(Interval iv, DWORD flags)
Definition: control.h:3063

Reimplemented from Animatable.

◆ ScaleTime()

CoreExport void ScaleTime	(	Interval	iv,
		float	s
	)

virtual

Remarks: This method is called to scale an interval of time by the specified scale factor.

Parameters

iv	The interval of time to scale. The origin of the scale is at iv.Start().
s	The scale factor for the time.

Default Implementation:: {}

Sample Code:: template <class KT>

void GenMorphCont<KT>::ScaleTime( Interval iv, float s)

{

if(GetLocked()==false)

{

int n = keys.Count();

TimeValue delta = int(s*float(iv.End()-iv.Start())) + iv.Start()-iv.End();

HoldTrack();

for (int i = 0; i < n; i++) {

if (iv.InInterval(keys[i].time)) {

keys[i].time =

int(s*float(keys[i].time - iv.Start())) + iv.Start();

} else

if (keys[i].time > iv.End()) {

keys[i].time += delta;

}

}

keys.Invalidate();

Invalidate();

NotifyDependents(FOREVER, PART_ALL, REFMSG_CHANGE);

}

}

int
MAXMEM_EXTERN_C UtilExport int(__cdecl *MAX_heapchk)(void)

Reimplemented from Animatable.

◆ InsertTime()

CoreExport void InsertTime	(	TimeValue	ins,
		TimeValue	amount
	)

virtual

Remarks: This method is called to insert the specified amount of time at the specified insertion point.

Parameters

ins	The time to begin the insertion.
amount	The amount of time to insert.

Default Implementation:: {}

Sample Code:: template <class KT>

void GenMorphCont<KT>::InsertTime( TimeValue ins, TimeValue amount )

{

if(GetLocked()==false)

{

int n = keys.Count();

HoldTrack();

for (int i = 0; i < n; i++) {

if ( keys[i].time >= ins ) {

keys[i].time += amount;

}

}

keys.Invalidate();

Invalidate();

NotifyDependents(FOREVER, PART_ALL, REFMSG_CHANGE);

}

}

Reimplemented from Animatable.

◆ AddNewKey()

CoreExport void AddNewKey	(	TimeValue	t,
		DWORD	flags
	)

virtual

Remarks: This method is called to add a new key at the specified time. The value of the key is set to the value of the previous key, or interpolated between keys, based on the flags passed.

Parameters

t	The time to add the key.
flags	One or more of the following values: ADDKEY_SELECT Select the new key and deselect any other selected keys. ADDKEY_INTERP If TRUE then initialize the new key to the interpolated value at that time. If FALSE, initialize the key to the value of the previous key. ADDKEY_FLAGGED Flag the newly created key as if FlagKey() was called for it.

Default Implementation:: {}

Reimplemented from Animatable.

◆ GetSelKeyCoords()

CoreExport int GetSelKeyCoords	(	TimeValue &	t,
		float &	val,
		DWORD	flags
	)

virtual

Remarks: This method is used to determine the commonality of the selected keys for display in the time/value type in fields of Track View. It is also used to retrieve the value and/or time of the selected keys (if there is only one selected, or they are common to the selected keys). The flags parameter specified which values to retrieve. The return value indicates if nothing, or several keys were selected. It also indicates if the selected keys shared a common time and/or common value.

Parameters

t	The time of the selected keys is returned here (if appropriate).
val	The value of the selected keys is returned here (if appropriate).
flags	One of the following values: KEYCOORDS_TIMEONLY Only the time t needs to be updated. KEYCOORDS_VALUEONLY Only the value val needs to be updated.

Returns: This indicates what was selected, and what these keys had in common. One or more of the following values should be set:

KEYS_NONESELECTED
This indicates that no keys are selected.

KEYS_MULTISELECTED
This indicates that multiple keys are selected. Both of these last two bits could be set.

KEYS_COMMONTIME
If the selected keys share the same time then this flag should be set. In this case it is appropriate to update t if required.

KEYS_COMMONVALUE
If the selected keys share the same value then this flag should be set. In this case it is appropriate to update val if required.

Default Implementation:: {return KEYS_NONESELECTED;}

Reimplemented from Animatable.

◆ SetSelKeyCoords()

CoreExport void SetSelKeyCoords	(	TimeValue	t,
		float	val,
		DWORD	flags
	)

virtual

Remarks: This method is called to update the time and/or value of the selected keys as specified by the flags. This is called if the user uses the time/value type in fields of Track View.

Parameters

t	The time to set for the selected keys (if the flags indicate this is needed).
val	The value to set for the selected keys (if the flags indicate this is needed).
flags	One of the following values: KEYCOORDS_TIMEONLY Only the time needs to be updated. KEYCOORDS_VALUEONLY Only the value needs to be updated.

Default Implementation:: {}

Reimplemented from Animatable.

◆ GetTrackVSpace()

CoreExport int GetTrackVSpace ( int lineHeight )

inlinevirtual

Remarks: Returns the vertical space occupied by the track in units of one line.

Parameters

lineHeight The height of a single line in pixels.

Default Implementation:: { return 1; }

Reimplemented from Animatable.

174 {return 1;}

◆ CanCopyTrack()

CoreExport BOOL CanCopyTrack	(	Interval	iv,
		DWORD	flags
	)

inlinevirtual

Remarks: Returns TRUE if this item can copy its data over the specified range; otherwise returns FALSE.

Parameters

iv	The interval of time that would be copied.
flags	One or more of the following values: TIME_INCLEFT Include the left endpoint. TIME_INCRIGHT Include the right endpoint.

Default Implementation:: {return FALSE;}

Reimplemented from Animatable.

175 {return 1;}

◆ CanPasteTrack()

CoreExport BOOL CanPasteTrack	(	TrackClipObject *	cobj,
		Interval	iv,
		DWORD	flags
	)

inlinevirtual

Remarks: Returns TRUE if this item can paste its data over the specified range; otherwise returns FALSE.

Parameters

cobj	The clipboard object that would be pasted. The item should look at the SuperClassID and Class_ID of the creator of the clip object to determine if it is a suitable object to paste. See Class TrackClipObject.
iv	The interval of time that would be pasted.
flags	One or more of the following values: TIME_INCLEFT Include the left endpoint. TIME_INCRIGHT Include the right endpoint.

Default Implementation:: {return FALSE;}

Reimplemented from Animatable.

176 {return cobj->ClassID()==ClassID();}

DefNoteTrack::ClassID

Class_ID ClassID()

Retrieves a constant that uniquely identifies the plugin class.

Definition: notetrck.h:156

TrackClipObject::ClassID

virtual Class_ID ClassID()=0

◆ CopyTrack()

CoreExport TrackClipObject* CopyTrack	(	Interval	iv,
		DWORD	flags
	)

virtual

Remarks: This method is called to copy the item's track data over the specified interval.

Parameters

iv	The interval of time over which to copy the track data.
flags	One or more of the following values: TIME_INCLEFT Include the left endpoint. TIME_INCRIGHT Include the right endpoint.

Returns: The item should return an instance of a class derived from TrackClipObject that contains the data for the item. See Class TrackClipObject.

Default Implementation:: {return NULL;}

Reimplemented from Animatable.

◆ PasteTrack()

CoreExport void PasteTrack	(	TrackClipObject *	cobj,
		Interval	iv,
		DWORD	flags
	)

virtual

Remarks: This method is called to paste the specified clip object to this track. This method will not be called unless CanPasteTrack() returned TRUE.

Parameters

cobj	The data to paste.
iv	The interval of time to paste.
flags	One or more of the following values: TIME_INCLEFT Include the left endpoint. TIME_INCRIGHT Include the right endpoint.

Reimplemented from Animatable.

◆ GetTimeRange()

CoreExport Interval GetTimeRange ( DWORD flags )

virtual

Remarks: Implemented by the System.

Returns an interval representing the tracks time range, based on the flags passed.

Parameters

flags One or more of the following values:

TIMERANGE_SELONLY
The bounding interval of selected keys only.

TIMERANGE_ALL
Whatever the channel's time range is - usually the bounding interval of all keys.

TIMERANGE_CHILDNODES
The node's time range should include its child nodes.

TIMERANGE_CHILDANIMS
A animatable's child anim ranges should be included.

Returns: An interval representing the tracks time range.

Reimplemented from Animatable.

◆ HitTestTrack()

CoreExport int HitTestTrack	(	TrackHitTab &	hits,
		Rect &	rcHit,
		Rect &	rcTrack,
		float	zoom,
		int	scroll,
		DWORD	flags
	)

virtual

Remarks: This method is called to determine which keys lie within the rcHit rectangle. Keys that are hit are added to the hits table.

Parameters

hits	The table of TrackHitRecords to update. Each key that lies within the hit rectangle (is hit) should be added to this table. It is up to the plug-in to define a scheme that allows it to identify its hits using the data members of Class TrackHitRecord. Also see Class Tab for methods to add to the table.
rcHit	This is the region that was selected for hit testing. This may be a small rectangle about the mouse pick point, or a larger rectangle if the user selected by window.
rcTrack	This is the entire rectangular region of the track.
zoom	The is the time zoom factor.
scroll	This is the time scroll factor.
flags	One or more of the following value: HITTRACK_SELONLY Selected only. HITTRACK_UNSELONLY Unselected only. HITTRACK_ABORTONHIT Abort hit testing on first hit. HITCURVE_TESTTANGENTS Hit test curve tangents.

Returns: One of the following values:

TRACK_DONE
This indicates the track was hit tested.

TRACK_DORANGE
This indicates that the system will handle hit testing to the range bar for the item. For example a node returns this value because it does not have any keys. Therefore it just lets the user hit test the range bar. In general, anything that is not a leaf controller will not implement this method and return the default. The system will then simply hit test the range bar.

TRACK_ASKCLIENT
If a plug-in returns this value then the anim's client will be given a chance to paint the track in Track View. If a client returns this value then the method PaintSubTrack() will be called.

Default Implementation:: { return TRACK_DORANGE; }

Reimplemented from Animatable.

◆ PaintTrack()

CoreExport int PaintTrack	(	ParamDimensionBase *	dim,
		HDC	hdc,
		Rect &	rcTrack,
		Rect &	rcPaint,
		float	zoom,
		int	scroll,
		DWORD	flags
	)

virtual

Remarks: This method is called to display the item in the track view. If an item needs to draw itself in a special fashion, it implements this method to do so. For example, a sound plug-in may draw its waveform using this method. If an item does not need to draw itself, the default implementation may be used. This draws the range bar for the item.

Note: When drawing something to appear in Track View, a developer should not do any clipping of their own. 3ds Max will take care of all clipping itself.

Parameters

dim	The dimension for the parameter of this track.
hdc	The handle of the device context.
rcTrack	The entire rectangle of the inside of the track.
rcPaint	This is the rectangular region that needs to be repainted - the invalid region.
zoom	The time zoom factor.
scroll	The time scroll factor.
flags	One or more of the following values which are filters for controllers with more than one curve: DISPLAY_XCURVE DISPLAY_YCURVE

Note: RGB controllers interpret X as red, Y as green, and Z as blue. DISPLAY_ZCURVE

Returns: One of the following values:

TRACK_DONE
Indicates the track was painted.

TRACK_DORANGE
Indicates the system should draw the range bars for the item.

TRACK_ASKCLIENT
Indicates the anim's client will be given a chance to paint the track in Track View. See Animatable::PaintSubTrack() which will be called to do this.

Default Implementation:: { return TRACK_DORANGE; }

Reimplemented from Animatable.

◆ SelectKeys()

CoreExport void SelectKeys	(	TrackHitTab &	sel,
		DWORD	flags
	)

virtual

Remarks: This method is called to select or deselect a set of keys identified by the TrackHitTab and the specified flags.

Parameters

sel The table of track hit records. See Class TrackHitRecord and Class Tab. Note the following: typedef Tab<TrackHitRecord> TrackHitTab;

flags Either SELKEYS_SELECT, SELKEYS_DESELECT, or a combination of SELKEYS_CLEARKEYS and SELKEYS_CLEARCURVE will be specified.

One or more of the following values:

SELKEYS_SELECT
The keys should be selected.

SELKEYS_DESELECT
The keys should be deselected.

SELKEYS_CLEARKEYS
All keys should be deselected.

SELKEYS_CLEARCURVE
All keys on the function curve should be deselected.

SELKEYS_FCURVE
Indicates that we are operating on the keys of a function curve, and not of a track.

Default Implementation:: {}

Reimplemented from Animatable.

◆ SelectKeyByIndex()

CoreExport void SelectKeyByIndex	(	int	i,
		BOOL	sel
	)

virtual

Remarks: This method is available in release 2.0 and later only.

This method is called to set the selected state of the key whose index is passed.

Parameters

i	The key to select or deselect.
sel	TRUE to select the key; FALSE to deselect it.

Default Implementation:: {}

Reimplemented from Animatable.

◆ NumSelKeys()

CoreExport int NumSelKeys ( )

virtual

Remarks: Returns the number of selected keys.

Default Implementation:: {return 0;}

Reimplemented from Animatable.

◆ FlagKey()

CoreExport void FlagKey ( TrackHitRecord hit )

virtual

Remarks: This method is called to have the plug-in flag or mark a specific key identified by the TrackHitRecord.

As an example, when the user goes to move a selection set of keys in the Track View, a yellow marker is drawn. To move the group of keys, the user clicks on a single one. The system needs to track this one key as it is moved, and needs a way to identify it. This method is called so the developer can flag this key as the one that was selected. This is needed because the Track View doesn't know anything about a specific controllers ordering of keys and thus cannot refer to it by index.

The system will call GetFlagKeyIndex() (described below) to retrieve the index of the key that was flagged.

Parameters

hit	The hit record that the controller gave the Track View in the first place to identify the hit. Thus this is enough information to identify the key. See Class TrackHitRecord.

Default Implementation:: {}

Sample Code:: template <class KT>

void GenMorphCont<KT>::FlagKey(TrackHitRecord hit)

{

int n = keys.Count();

for ( int i = 0; i < n; i++ ) {

keys[i].ClearFlag(KEY_FLAGGED);

}

assert(hit.hit>=0&&hit.hit<(DWORD)n);

keys[hit.hit].SetFlag(KEY_FLAGGED);

}

TrackHitRecord
Definition: TrackHitRecord.h:26

TrackHitRecord::hit
DWORD hit
Definition: TrackHitRecord.h:28

assert
#define assert(expr)
Definition: assert1.h:81

Reimplemented from Animatable.

◆ GetFlagKeyIndex()

CoreExport int GetFlagKeyIndex ( )

virtual

Remarks: Returns the index of the key that is flagged, or -1 if no keys are flagged. See the method above.

Default Implementation:: {return -1;}

Sample Code:: template <class KT>

int GenMorphCont<KT>::GetFlagKeyIndex()

{

int n = keys.Count();

for ( int i = 0; i < n; i++ ) {

if (keys[i].TestFlag(KEY_FLAGGED)) {

return i;

}

}

return -1;

}

Reimplemented from Animatable.

◆ IsAnimated()

CoreExport BOOL IsAnimated ( )

inlinevirtual

Remarks: Returns TRUE if this animatable actually has animation; otherwise FALSE. This method is recursive, so for example, if you call node->IsAnimated() it will return TRUE if any aspect of the node is animated; otherwise it will return FALSE.

Default Implementation:: The default implementation returns TRUE if a child anim has animation.

Reimplemented from Animatable.

187 {return TRUE;}

◆ EditTrackParams()

CoreExport void EditTrackParams	(	TimeValue	t,
		ParamDimensionBase *	dim,
		const MCHAR *	pname,
		HWND	hParent,
		IObjParam *	ip,
		DWORD	flags
	)

virtual

Remarks: This method is called for the plug-in to put up a modal dialog and let the user edit the tracks parameters for the selected keys. This function should not return until the user has completed editing at which time any windows that were created should be destroyed. Unlike BeginEditParams() and EndEditParams() this interface is modal.

Parameters

t	This time represents the horizontal position of where the user right clicked to bring up the modal edit track parameters dialog. See the flags below for when this parameter is valid.
dim	The parameter dimension. See Class ParamDimensionBase.
pname	The name of the parameter as given by the client.
hParent	This is the parent window that should be used to create any dialogs.
ip	An interface pointer available for calling functions in 3ds Max.
flags	One or more of the following values: EDITTRACK_FCURVE The user is in the function curve editor. EDITTRACK_TRACK The user is in one of the track views. EDITTRACK_SCENE The user is editing a path in the scene. EDITTRACK_BUTTON The user invoked by choosing the properties button. In this case the time parameter is NOT valid. EDITTRACK_MOUSE The user invoked by right clicking with the mouse. In this case the time parameter is valid.

Default Implementation:: {}

Reimplemented from Animatable.

◆ TrackParamsType()

CoreExport int TrackParamsType ( )

inlinevirtual

Remarks: This method returns a value that indicates how the track parameter editing is invoked.

Returns: One of the following values:

TRACKPARAMS_NONE

Has no track parameters. If this is returned then EditTrackParams() will not be called.

TRACKPARAMS_KEY

Entered by right clicking on a selected key. This should be used if the dialog provides parameters for the entire controller (for example as the Noise controller's dialog does).

TRACKPARAMS_WHOLE

Entered by right clicking anywhere in the track. This should be used if the dialog will represent the selection of keys (as a key info type dialog does).

Default Implementation:: {return TRACKPARAMS_NONE;}

Reimplemented from Animatable.

189 {return TRACKPARAMS_KEY;}

TRACKPARAMS_KEY

#define TRACKPARAMS_KEY

Definition: TrackFlags.h:165

◆ SupportTimeOperations()

CoreExport BOOL SupportTimeOperations ( )

inlinevirtual

Remarks: If an anim supports time operations in the track view (cut, copy, paste, etc.), it should implement this method to return TRUE. When it is FALSE the user cannot select blocks of time in the anim's track.

Default Implementation:: {return FALSE;}

Reimplemented from Animatable.

190 {return TRUE;}

◆ Save()

CoreExport IOResult Save ( ISave * isave )

virtual

Called for saving data.

Called by the system to allow the plugin to save its data.

Parameters

isave - This pointer may be used to call methods to write data to disk. See the section on Loading and Saving Plug-in Data for an overview of the load/save process.

Returns

The default implementation is return IO_OK.

IO_OK means the result was acceptable, with no errors.
IO_ERROR This should be returned if an error occurred.

Reimplemented from ReferenceMaker.

◆ Load()

CoreExport IOResult Load ( ILoad * iload )

virtual

Called for loading data.

Called by the system to allow the plug-in to load its data. See the section on Loading and Saving Plug-in Data for an overview of the load - save process.

Parameters

iload - This interface pointer may be used to call methods to read data from disk.

Returns

The default implementation is return IO_OK.

IO_OK means the result was acceptable, with no errors.
IO_ERROR This should be returned if an error occurred.

Reimplemented from ReferenceMaker.

◆ DeleteThis()

CoreExport void DeleteThis ( )

virtual

Deletes an instance of this class.

3ds Max calls this method when it needs to delete a plugin object (an instance of a class derived from Animatable). Similarly, plugins that need to delete instances of an Animatable or a class directly derived from it via an Animatable pointer, should call this method instead of calling directly operator delete. Following these rules will ensure that the same memory manager is used to allocate and deallocate the object. The default implementation of this method deletes the object. Plugin instances that never need to be deleted from the heap can overwrite this method to do nothing.

Note: See the method ClassDesc::Create() for details on how Max allocates plugin objects.; See ReferenceMaker::DeleteMe() and ReferenceTarget::MaybeAutoDelete() for information on how plugin instances are deleted by the system.

Remarks: See Memory Management.

See also: Required DLL Functions, Class ClassDesc.

Reimplemented from Animatable.

◆ NotifyRefChanged()

RefResult NotifyRefChanged	(	const Interval &	changeInt,
		RefTargetHandle	hTarget,
		PartID &	partID,
		RefMessage	message,
		BOOL	propagate
	)

inlinevirtual

Receives and responds to messages.

A plugin which makes references must implement a method to receive and respond to messages broadcast by its dependents. This is done by implementing NotifyRefChanged(). The plugin developer usually implements this method as a switch statement where each case is one of the messages the plugin needs to respond to. The Method StdNotifyRefChanged calls this, which can change the partID to new value. If it doesn't depend on the particular message& partID, it should return REF_DONTCARE.

For developer that need to update a dialog box with data about an object you reference note the following related to this method: This method may be called many times. For instance, say you have a dialog box that displays data about an object you reference. This method will get called many time during the drag operations on that object. If you updated the display every time you'd wind up with a lot of 'flicker' in the dialog box. Rather than updating the dialog box each time, you should just invalidate the window in response to the NotifyRefChanged() call. Then, as the user drags the mouse your window will still receive paint messages. If the scene is complex the user may have to pause (but not let up on the mouse) to allow the paint message to go through since they have a low priority. This is the way many windows in 3ds Max work.

Parameters

changeInt	- This is the interval of time over which the message is active. Currently, all plug-ins will receive FOREVER for this interval, with the exception of REFMSG_FLAGDEPENDENTS notifications. In that case, changeInt.Start() is the timepoint to perform the dependency test.
hTarget	- This is the handle of the reference target the message was sent by. The reference maker uses this handle to know specifically which reference target sent the message.
partID	- This contains information specific to the message passed in. Some messages don't use the partID at all. See the section List of Reference Messages for more information about the meaning of the partID for some common messages.
message	- The message parameters passed into this method is the specific message which needs to be handled.
propagate	- If called through ReferenceMaker::NotifyDependents(), the value of 'propagate' passed to it. Used if calling NotifyDependents() from within NotifyRefChanged().

Returns: The return value from this method is of type RefResult. This is usually REF_SUCCEED indicating the message was processed. Sometimes, the return value may be REF_STOP. This return value is used to stop the message from being propagated to the dependents of the item.

Implements ReferenceMaker.

197 {return REF_SUCCEED;}

REF_SUCCEED

@ REF_SUCCEED

The operation succeeded.

Definition: ref.h:765

◆ Clone()

CoreExport RefTargetHandle Clone ( RemapDir & remap )

virtual

This method is used by 3ds Max to clone an object.

See also: CloneRefHierarchy(), class RemapDir This method is called by 3ds Max to have the plugin clone itself. The plug-in's implementation of this method should copy both the data structure and all the data residing in the data structure of this reference target. The plugin should clone all its references as well. Also, the plug-in's implementation of this method must call BaseClone(). In order for classes derived from this class to clone cleanly, the Clone method should just create the new instance, and then call an implementation of BaseClone that clones the references and copies any other necessary data. For example:
class MyDerivedPlugin

: public MyBasePlugin

{

const int MY_REFERENCE = 1;

ReferenceTarget* Clone(RemapDir& remap)

{

ReferenceTarget* result = new MyDerivedPlugin();

BaseClone(this, result, remap);

return result;

}

void BaseClone(ReferenceTarget* from, ReferenceTarget* to, RemapDir& remap)

{

if (!to || !from || from == to)

return;

MyBasePlugin::BaseClone(from, to, remap);

to->ReplaceReference(MY_REFERENCE, remap->CloneRef(from->GetReference(MY_REFERENCE)));

}

};

DefNoteTrack::Clone
CoreExport RefTargetHandle Clone(RemapDir &remap)
This method is used by 3ds Max to clone an object.

ReferenceMaker::GetReference
virtual CoreExport RefTargetHandle GetReference(int i)
Returns the 'i-th' reference.

ReferenceMaker::ReplaceReference
CoreExport RefResult ReplaceReference(int which, RefTargetHandle newtarg, BOOL delOld=TRUE)
Used when cloning reference makers.

ReferenceTarget
A scene entity that is being owned and listened to by other scene entities.
Definition: ref.h:1844

ReferenceTarget::BaseClone
virtual CoreExport void BaseClone(ReferenceTarget *from, ReferenceTarget *to, RemapDir &remap)
This method copies base class data from an object to its clone.

RemapDir
For remapping references during a Clone.
Definition: ref.h:830

RemapDir::CloneRef
virtual RefTargetHandle CloneRef(RefTargetHandle oldTarg)
Creates a clone of a reference target only if it hasn't been cloned already.

This method should not be directly called by plug-ins. Instead, either RemapDir::CloneRef() or CloneRefHierachy() should be used to perform cloning. These methods ensure that the mapping from the original object to the clone is added to the RemapDir used for cloning, which may be used during backpatch operations

Note: See the remarks in method BaseClone() below.

Parameters

remap - A RemapDir instance used for remapping references during a Clone.

Returns: A pointer to the cloned item.

Reimplemented from ReferenceTarget.

Member Data Documentation

◆ keys

NoteKeyTab keys

◆ trackName

MSTR trackName

Public Member Functions

Public Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ DefNoteTrack() [1/2]

◆ DefNoteTrack() [2/2]

Member Function Documentation

◆ operator=()

◆ HoldTrack()

◆ ClassID()

◆ GetClassName()

◆ NumKeys()

◆ GetKeyTime()

◆ MapKeys()

◆ DeleteKeys()

◆ CloneSelectedKeys()

◆ DeleteTime()

◆ ReverseTime()

◆ ScaleTime()

◆ InsertTime()

◆ AddNewKey()

◆ GetSelKeyCoords()

◆ SetSelKeyCoords()

◆ GetTrackVSpace()

◆ CanCopyTrack()

◆ CanPasteTrack()

◆ CopyTrack()

◆ PasteTrack()

◆ GetTimeRange()

◆ HitTestTrack()

◆ PaintTrack()

◆ SelectKeys()

◆ SelectKeyByIndex()

◆ NumSelKeys()

◆ FlagKey()

◆ GetFlagKeyIndex()

◆ IsAnimated()

◆ EditTrackParams()

◆ TrackParamsType()

◆ SupportTimeOperations()

◆ Save()

◆ Load()

◆ DeleteThis()

◆ NotifyRefChanged()

◆ Clone()

Member Data Documentation

◆ keys

◆ trackName