#include "maxheap.h"
#include "polyshp.h"
#include "GraphicsConstants.h"

Classes
class	SplinePoint
	Provides the vertex-level point information for the Spline3D class. More...

class	SplineKnotAssy
	Used for the internal storage of spline knot assemblies in the Spline3D class. More...

class	SplineKnot
	Describes a single knot in a spline. More...

class	Spline3D
	General-purpose 3D spline class. More...

Macros
#define	BEZ_SHAPE_KNOT (1<<0)
	A knot point. More...

#define	BEZ_SHAPE_INTERPOLATED (1<<1)
	An interpolated point between two knots. More...

#define	LTYPE_CURVE 0
	Specifies that the segment should interpolate based on the bezier handles for the segment. More...

#define	LTYPE_LINE 1
	Specifies that the segment should go straight from knot to knot and ignore the bezier handles. More...

#define	CURVE_CURVE (LTYPE_CURVE \| (LTYPE_CURVE<<2))

#define	LINE_CURVE (LTYPE_LINE \| (LTYPE_CURVE<<2))

#define	CURVE_LINE (LTYPE_CURVE \| (LTYPE_LINE<<2))

#define	LINE_LINE (LTYPE_LINE \| (LTYPE_LINE<<2))

#define	KTYPE_AUTO 0
	Produces the bezier handles automatically to produce a smooth curve. More...

#define	KTYPE_CORNER 1
	Produces a sharp corner. More...

#define	KTYPE_BEZIER 2
	This knot type produces bezier handles that are collinear (the bezier vectors coming out of the knot are collinear). More...

#define	KTYPE_BEZIER_CORNER (KTYPE_BEZIER \| KTYPE_CORNER)
	This knot type has bezier handles but they are not constrained to be opposite each other. More...

#define	KTYPE_RESET 4

#define	PARM_UNIFORM 0

#define	PARM_ARCLENGTH 1

#define	PARM_CENTRIPETAL 2

#define	PARM_CUSTOM 3

#define	DRAW_IDLE 0

#define	DRAW_INITIAL_MOUSE_DOWN 1

#define	DRAW_FREEMOVE_POINT 2

#define	DRAW_FREEMOVE_POINT_MOUSE_DOWN 3
	Inserting's initial click inside spline. More...

#define	DRAW_INITIAL_BEZ_ADJ 11

#define	DRAW_DRAGGING_VECTOR 22

#define	SPLINE_INTERP_SIMPLE 0
	Parameter space based on segments. More...

#define	SPLINE_INTERP_NORMALIZED 1
	Parameter space normalized to curve length. More...

#define	SPLINE_MATID_SHIFT 16
	The mat ID is stored in the HIWORD of the knot flags. More...

#define	SPLINE_MATID_MASK 0xFFFF
	The mat ID is stored in the HIWORD of the knot flags. More...

#define	SEGMENT_VISIBLE (1<<0)

#define	SPLINEKNOT_NO_SNAP (1<<1)
	Suppresses snapping to knot if set. More...

#define	SPLINEKNOT_ADD_SEL (1<<2)
	Primarily for internal use, and is designed for the new "connect copy" feature of spline segments. More...

#define	SPLINEKNOT_USER1 (1 << 8)
	Developer-defined knot flags Flag bits 8-15 are reserved for use by developers. More...

#define	SPLINEKNOT_USER2 (1 << 9)

#define	SPLINEKNOT_USER3 (1 << 10)

#define	SPLINEKNOT_USER4 (1 << 11)

#define	SPLINEKNOT_USER5 (1 << 12)

#define	SPLINEKNOT_USER6 (1 << 13)

#define	SPLINEKNOT_USER7 (1 << 14)

#define	SPLINEKNOT_USER8 (1 << 15)

#define	SPLINEKNOT_USERFLAGS (SPLINEKNOT_USER1 \| SPLINEKNOT_USER2 \| SPLINEKNOT_USER3 \| SPLINEKNOT_USER4 \| SPLINEKNOT_USER5 \| SPLINEKNOT_USER6 \| SPLINEKNOT_USER7 \| SPLINEKNOT_USER8)

#define	SPLINE_CLOSED (1<<0)

#define	SPLINE_ORTHOG (1<<1)

#define	SPLINE_COMPUTE_BEZ_IN_USE (1<<2)

Macro Definition Documentation

◆ SPLINE_MATID_SHIFT

#define SPLINE_MATID_SHIFT 16

The mat ID is stored in the HIWORD of the knot flags.

◆ SPLINE_MATID_MASK

#define SPLINE_MATID_MASK 0xFFFF

The mat ID is stored in the HIWORD of the knot flags.

◆ SEGMENT_VISIBLE

#define SEGMENT_VISIBLE (1<<0)

◆ SPLINEKNOT_NO_SNAP

#define SPLINEKNOT_NO_SNAP (1<<1)

Suppresses snapping to knot if set.

◆ SPLINEKNOT_ADD_SEL

#define SPLINEKNOT_ADD_SEL (1<<2)

Primarily for internal use, and is designed for the new "connect copy" feature of spline segments.

The method XFormVerts() normally operates on the selected knots (or the knots of selected spline segments), but if the knots have the SPLINEKNOT_ADD_SEL flag set, and the SplineShape also has the ES_ADDED_SELECT flag set, then those additional knots will be affected as well. Additional selection for transformation

◆ SPLINEKNOT_USER1

#define SPLINEKNOT_USER1 (1 << 8)

Developer-defined knot flags Flag bits 8-15 are reserved for use by developers.

These bits should only be used temporarily, since other developers may also use them for other purposes.

◆ SPLINEKNOT_USER2

#define SPLINEKNOT_USER2 (1 << 9)

◆ SPLINEKNOT_USER3

#define SPLINEKNOT_USER3 (1 << 10)

◆ SPLINEKNOT_USER4

#define SPLINEKNOT_USER4 (1 << 11)

◆ SPLINEKNOT_USER5

#define SPLINEKNOT_USER5 (1 << 12)

◆ SPLINEKNOT_USER6

#define SPLINEKNOT_USER6 (1 << 13)

◆ SPLINEKNOT_USER7

#define SPLINEKNOT_USER7 (1 << 14)

◆ SPLINEKNOT_USER8

#define SPLINEKNOT_USER8 (1 << 15)

◆ SPLINEKNOT_USERFLAGS

Classes

Macros