Polygon edge iterator. More...

#include <MItMeshEdge.h>

Public Member Functions
	MItMeshEdge (MObject &polyObject, MStatus *ReturnStatus=NULL)
	Constructor. More...

	MItMeshEdge (MObject &polyObject, MObject &component, MStatus *ReturnStatus=NULL)
	Constructor. More...

	MItMeshEdge (const MDagPath &polyObject, MObject &component=MObject::kNullObj, MStatus *ReturnStatus=NULL)
	Constructor. More...

virtual	~MItMeshEdge ()
	Destructor. More...

bool	isDone (MStatus *ReturnStatus=NULL)
	Indicates if all of the edges have been traversed yet. More...

MStatus	next ()
	Advance to the next edge in the iteration. More...

MStatus	reset ()
	Reset the iterator to the first edge. More...

MStatus	reset (MObject &polyObject, MObject &component=MObject::kNullObj)
	Reset the iterator to the first edge in the supplied mesh. More...

MStatus	reset (const MDagPath &polyObject, MObject &component=MObject::kNullObj)
	Reset the iterator to the first edge in the supplied mesh. More...

int	count (MStatus *ReturnStatus=NULL)
	Return the number of edges in this iteration. More...

MPoint	center (MSpace::Space space=MSpace::kObject, MStatus *ReturnStatus=NULL)
	Returns the center of the current edge. More...

MPoint	point (int index, MSpace::Space space=MSpace::kObject, MStatus *ReturnStatus=NULL)
	Return the position of the specified vertex of the current edge. More...

MStatus	setPoint (const MPoint &point, unsigned int index, MSpace::Space space=MSpace::kObject)
	Set the specified vertex of the current edge to the given value. More...

bool	isSmooth (MStatus *ReturnStatus=NULL) const
	This method determines if the current edge in the iteration is smooth (soft). More...

MStatus	setSmoothing (bool smooth=true)
	This method sets the current edge to be hard or smooth (soft). More...

MStatus	cleanupSmoothing ()
	This method is obsolete. More...

int	index (int index, MStatus *ReturnStatus=NULL)
	This method returns a vertex index for the current edge based upon the specified index. More...

int	index (MStatus *ReturnStatus=NULL) const
	This method returns the index of the current edge in the iteration. More...

MObject	edge (MStatus *ReturnStatus=NULL)
	This method is obsolete. More...

MObject	currentItem (MStatus *ReturnStatus=NULL)
	Get the current edge in the iteration as a component. More...

MStatus	updateSurface ()
	Signal that this polygonal surface has changed and needs to redraw itself. More...

MStatus	geomChanged ()
	Reset the geom pointer in the MItMeshEdge. More...

MStatus	setIndex (int index, int &prevIndex)
	This method sets the index of the current edge to be accessed. More...

int	getConnectedFaces (MIntArray &faceList, MStatus *ReturnStatus=NULL) const
	This method returns an array containing the indices of the faces connected to the current edge. More...

int	getConnectedEdges (MIntArray &edgeList, MStatus *ReturnStatus=NULL) const
	This method returns a list of edges connected to the current edge. More...

MStatus	numConnectedFaces (int &faceCount) const
	This method returns the number of faces (1 or 2 ) connected to the current edge. More...

MStatus	numConnectedEdges (int &edgeCount) const
	This method returns the number of edges connected to the current edge. More...

bool	connectedToFace (int index, MStatus *ReturnStatus=NULL)
	This method determines whether the given face contains the current edge. More...

bool	connectedToEdge (int index, MStatus *ReturnStatus=NULL)
	This method determines whether the given edge is connected to the current edge. More...

bool	onBoundary (MStatus *ReturnStatus=NULL)
	This method checks to see if the current edge is a border edge. More...

MStatus	getLength (double &length, MSpace::Space space=MSpace::kObject)
	This method returns the length of the current edge. More...

Static Public Member Functions
static const char *	className ()
	Returns the name of this class. More...

Detailed Description

Polygon edge iterator.

This class is the edge iterator for polygonal surfaces.

The iterator functions in two modes depending on whether a component is specified. When a component is not given or is NULL the iteration will be over all edges for the polygon. When a component is given this iterator will iterate over the edges specified in the component. When iterating over components a DAG path to the polygon must also be supplied.

Examples:: convertEdgesToFacesCmd/convertEdgesToFacesCmd.cpp, convertVerticesToEdgesCmd/convertVerticesToEdgesCmd.cpp, lassoTool/lassoTool.cpp, meshOpCmd/meshOpFtyAction.cpp, and objExport/objExport.cpp.

Constructor & Destructor Documentation

OPENMAYA_MAJOR_NAMESPACE_OPEN MItMeshEdge	(	MObject &	polyObject,
		MStatus *	ReturnStatus = `NULL`
	)

Constructor.

Creates an iterator for all edges of the given surface.

Parameters

[in]	polyObject	The surface to iterate over
[out]	ReturnStatus	Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MItMeshEdge	(	MObject &	polyObject,
		MObject &	component,
		MStatus *	ReturnStatus = `NULL`
	)

Constructor.

Creates an iterator for the edges of a given surface. The returned edges are connected to the component object. This component may be a vertex or a face or an edge component. If no component is specified then the iteration will be for all edges of the given polygon.

Parameters

[in]	polyObject	The surface to iterate over
[in]	component	The component that determines which edges to iterate over
[out]	ReturnStatus	Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MItMeshEdge	(	const MDagPath &	polyObject,
		MObject &	component = `MObject::kNullObj`,
		MStatus *	ReturnStatus = `NULL`
	)

Constructor.

Creates an iterator for the edges of a given surface. The returned edges are connected to the component object. This component may be a vertex or a face or an edge component. If no component is specified then the iteration will be for all edges of the given polygon.

Parameters

[in]	polyObject	The surface to iterate over
[in]	component	The edges of the polyObject to iterate over
[out]	ReturnStatus	Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

~MItMeshEdge ( )

virtual

Destructor.

Frees up storage used by the iterator.

Member Function Documentation

bool isDone ( MStatus * ReturnStatus = NULL )

Indicates if all of the edges have been traversed yet.

Parameters

[out] ReturnStatus Status code

Returns: Boolean value: true All edges have been traversed, false otherwise.

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

Examples:: convertEdgesToFacesCmd/convertEdgesToFacesCmd.cpp.

MStatus next ( )

Advance to the next edge in the iteration.

Returns: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus reset ( )

Reset the iterator to the first edge.

Returns: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus reset	(	MObject &	polyObject,
		MObject &	component = `MObject::kNullObj`
	)

Reset the iterator to the first edge in the supplied mesh.

Uses the edges constrained by the given component. If component is null then the iteration will be for all edges in the given polygon.

Parameters

[in]	polyObject	The mesh object for the iteration
[in]	component	The constraint object. May be a vertex, a face or an edge component

Returns: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.
MS::kInvalidParameter Invalid object given.
MS::kInsufficientMemory Memory error.

MStatus reset	(	const MDagPath &	polyObject,
		MObject &	component = `MObject::kNullObj`
	)

Reset the iterator to the first edge in the supplied mesh.

Uses the edges constrained by the given component. If component is null then the iteration will be for all edges in the given polygon.

Parameters

[in]	polyObject	The surface to iterate over
[in]	component	The constraint object. May be a vertex, a face or an edge component

Returns: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.
MS::kInvalidParameter Invalid object given.

int count ( MStatus * ReturnStatus = NULL )

Return the number of edges in this iteration.

Parameters

[out] ReturnStatus Status code

Returns: The number of edges in the iteration

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MPoint center	(	MSpace::Space	space = `MSpace::kObject`,
		MStatus *	ReturnStatus = `NULL`
	)

Returns the center of the current edge.

Parameters

[in]	space	The coordinate system for this operation
[out]	ReturnStatus	Status code

Returns: The center of the current edge

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MPoint point	(	int	index,
		MSpace::Space	space = `MSpace::kObject`,
		MStatus *	ReturnStatus = `NULL`
	)

Return the position of the specified vertex of the current edge.

Parameters

[in]	index	The vertex of the edge we wish to examine (0 or 1)
[in]	space	The coordinate system for this operation
[out]	ReturnStatus	Status code

Returns: The position of the edge vertex for the given index

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.
MS::kInvalidParameter Invalid index given.

MStatus setPoint	(	const MPoint &	point,
		unsigned int	index,
		MSpace::Space	space = `MSpace::kObject`
	)

Set the specified vertex of the current edge to the given value.

Parameters

[in]	point	The new value for the edge
[in]	index	The vertex index of the current edge we wish to set (0 or 1)
[in]	space	The coordinate system for this operation

Returns: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.
MS::kInvalidParameter Invalid index given.

bool isSmooth ( MStatus * ReturnStatus = NULL ) const

This method determines if the current edge in the iteration is smooth (soft).

Parameters

[out] ReturnStatus Status code

Returns: Boolean value: true if the edge is smooth (soft), false if the edge is hard.

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus setSmoothing ( bool smooth = true )

This method sets the current edge to be hard or smooth (soft).

The cleanupSmoothing method is no longer required to be called after setSmoothing in Maya3.0 and later versions.

Parameters

[in] smooth if true the edge will be smooth (soft), otherwise the edge will be hard.

Returns: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus cleanupSmoothing ( )

This method is obsolete.

[as of Maya 2019]

Deprecated:: This method is no longer required in Maya3.0 and later versions. (In previous versions, this method was needed to clean up the geometry after setSmoothing has been done on one or more edges).

Returns: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

int index	(	int	index,
		MStatus *	ReturnStatus = `NULL`
	)

This method returns a vertex index for the current edge based upon the specified index.

The index can be either 0 or 1 since an edge is made up of exactly two vertices.

Parameters

[in]	index	The vertex index in current edge (0 or 1)
[out]	ReturnStatus	Status code

Returns: The index in the vertex list of the edge vertex requested

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.
MS::kInvalidParameter Invalid index given.

int index ( MStatus * ReturnStatus = NULL ) const

This method returns the index of the current edge in the iteration.

Parameters

[out] ReturnStatus Status code

Returns: The index of the current edge in the iteration

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MObject edge ( MStatus * ReturnStatus = NULL )

This method is obsolete.

Get the current edge in the iteration as a component.

[from before Maya 2016]

Deprecated:: Use MItMeshEdge::currentItem instead.

Components are used to specify one or more edges and are usefull in operating on groups of non-contiguous edges for a surface. Components do not contain any information about the surface that they refer to so an MDagPath must be specified when dealing with components.

Parameters

[out] ReturnStatus Status code

Returns: The current edge in the interation

Status Codes:

MS::kSuccess The method was successful.
MS::kInsufficientMemory No memory available.
MS::kFailure An object error has occurred.

MObject currentItem ( MStatus * ReturnStatus = NULL )

Get the current edge in the iteration as a component.

Components are used to specify one or more edges and are usefull in operating on groups of non-contiguous edges for a surface. Components do not contain any information about the surface that they refer to so an MDagPath must be specified when dealing with components.

Parameters

[out] ReturnStatus Status code

Returns: The current edge in the interation

Status Codes:

MS::kSuccess The method was successful.
MS::kInsufficientMemory No memory available.
MS::kFailure An object error has occurred.

MStatus updateSurface ( )

Signal that this polygonal surface has changed and needs to redraw itself.

Returns: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus geomChanged ( )

Reset the geom pointer in the MItMeshEdge.

If you're using MFnMesh to update Normals or Color per vertex while iterating, you must call geomChanged on the iterator immediately after the MFnMesh call to make sure that your geometry is up to date. A crash may result if this method is not called.

Returns: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus setIndex	(	int	index,
		int &	prevIndex
	)

This method sets the index of the current edge to be accessed.

The current edge will no longer be in sync with any previous iteration.

Parameters

[in]	index	The index of desired edge to access.
[out]	prevIndex	Index of the edge which was current before the change.

Returns: The index of the current edge in the iteration

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.
MS::kInvalidParameter Invalid index given.

int getConnectedFaces	(	MIntArray &	faces,
		MStatus *	ReturnStatus = `NULL`
	)		const

This method returns an array containing the indices of the faces connected to the current edge.

Normally a boundary edge will only have one face connected to it and an internal edge will have two, but if the mesh has manifold geometry then the edge may have three or more faces connected to it.

Parameters

[out]	faces	Array of face indices.
[out]	ReturnStatus	Status code

Returns: Number of connected faces

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.
MS::kInvalidParameter Invalid index given.

int getConnectedEdges	(	MIntArray &	edges,
		MStatus *	ReturnStatus = `NULL`
	)		const

This method returns a list of edges connected to the current edge.

Parameters

[out]	edges	Array of edge indices.
[out]	ReturnStatus	Status code

Returns: Number of connected edges

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.
MS::kInvalidParameter Invalid index given.

MStatus numConnectedFaces ( int & faceCount ) const

This method returns the number of faces (1 or 2 ) connected to the current edge.

Parameters

[in] faceCount Number of connected faces

Returns: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.
MS::kInvalidParameter Invalid index given.

MStatus numConnectedEdges ( int & edgeCount ) const

This method returns the number of edges connected to the current edge.

Parameters

[out] edgeCount Number of connected edges.

Returns: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.
MS::kInvalidParameter Invalid index given.

bool connectedToFace	(	int	index,
		MStatus *	ReturnStatus = `NULL`
	)

This method determines whether the given face contains the current edge.

Parameters

[in]	index	Index of face to check.
[out]	ReturnStatus	Status code

Returns: Boolean value: true if contained, false otherwise.

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.
MS::kInvalidParameter Invalid index given.

bool connectedToEdge	(	int	index,
		MStatus *	ReturnStatus = `NULL`
	)

This method determines whether the given edge is connected to the current edge.

Parameters

[in]	index	Index of edge to check.
[in]	ReturnStatus	Status code

Returns: Boolean value: true if contained, false otherwise.

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.
MS::kInvalidParameter Invalid index given.

bool onBoundary ( MStatus * ReturnStatus = NULL )

This method checks to see if the current edge is a border edge.

NOTE: it is possible to turn all edges into boundaries by extracting faces. In this case, onBoundary() will always return true even though it appears that there are internal edges.

Parameters

[out] ReturnStatus Status code

Returns: Boolean value: true if it's a border edge, false otherwise.

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.
MS::kInvalidParameter Invalid index given.

MStatus getLength	(	double &	length,
		MSpace::Space	space = `MSpace::kObject`
	)

This method returns the length of the current edge.

Parameters

[in]	length	length of edge
[in]	space	Coordinate space in which to perform the operation.

Returns: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.
MS::kInvalidParameter Invalid coordinate space given.

const char * className ( )

static

Returns the name of this class.

Returns: The name of this class.

The documentation for this class was generated from the following files:

MItMeshEdge.h
MItMeshEdge.cpp

Public Member Functions

Static Public Member Functions

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation