Keys available for performing functions in Netfabb with a single keystroke
Jump to:
- Global
- Default Module
- Part Export
- Repair Module
- Texture Module
- Support Module
- Selective Space Structures
- Labeling Module
Global
These shortcuts are available almost always, mostly when no module is active other than the default one, but also in those modules, too. Some of these require a selection of some kind, such as a part or a slice.
|
Delete selected |
Delete |
|
|
Toggle triangle highlighting |
Ctrl+G |
|
|
Zoom in |
A |
|
|
Zoom out |
Q |
|
|
Zoom Mode |
F1 |
|
|
Screenshot to clipboard |
Shift+Ctrl+P |
This takes a screenshot of the 3D display contents.
Note: If you had
Netfabb installed previously, this may still be Ctrl+C. By default, that shortcut is now assigned to taking a reference to a part or a slice to the clipboard for use with Ctrl+V or via context menu option for pasting a copy of that part or slice.
|
|
Zoom to selection |
F |
Zooms and also focuses on the selection. |
|
Zoom to Home |
H |
Zooms and focuses the build platform. |
|
Switch to Mesh Manipulation |
Ctrl+T |
|
|
Undo |
Ctrl+Z |
|
|
Redo |
Ctrl+Y |
|
|
Duplicate part or slice |
Ctrl+X |
|
 Duplicate filling the platform
|
Ctrl+F |
|
|
Duplicate in same position
|
Ctrl+D |
|
|
Rename part or slice |
F2 |
|
|
New project |
Ctrl+N |
|
|
Open file |
Ctrl+O |
|
|
Save project |
Ctrl+S |
|
|
Next perspective |
Space |
|
|
Previous perspective |
Shift+Space |
|
|
Front Perspective |
These provide direct access to the six plane-aligned perspectives. By default, these have no shortcuts assigned. |
|
|
Back Perspective |
||
|
Left Perspective |
||
|
Right Perspective |
||
|
Top Perspective |
||
|
Bottom Perspective |
||
|
Select all |
Ctrl+A |
|
|
Invert selection |
Ctrl+I |
|
|
Select fully inside platform |
By default, these have no shortcuts assigned. |
|
|
Select fully outside platform |
||
|
Select partly inside platform |
||
|
Select partly outside platform |
||
|
Move clip plane in the +X direction |
Shift+D |
These move the clipping planes in directions relative to the cardinal axes of the build platform. |
|
Move clip plane in the -X direction |
Shift+A |
|
|
Move clip plane in the +Y direction |
Shift+Q |
|
|
Move clip plane in the -Y direction |
Shift+E |
|
|
Move clip plane in the +Z direction |
Shift+W |
|
|
Move clip plane in the -Z direction |
Shift+S |
|
|
Settings for clipplane step jump
|
Shift+Ctrl+I |
Opens the clipplane step configuration dialog |
|
Toggle orbit type between Free and Constrained |
O |
|
|
Toggle Visibility |
Shift+V |
Toggles the visibility of the selected body in Lattice Commander |
Default module
|
Highlight part |
Shift+H |
This draws the part in front of any and all others while you hold the key. |
|
Show platform of current part |
P |
Draws a platform local to the currently selected part or parts while you hold the key. |
|
Align parts |
F7 |
|
|
Platform overview |
F5 |
|
|
Collision detection |
Ctrl+K |
|
|
Move parts |
Shift+Ctrl+M |
Opens the Move Part dialog. |
|
Rotate parts |
Shift+Ctrl+R |
Opens the Rotate Part dialog. |
|
Rotate around X |
X |
These rotations are performed around the cardinal axes of the build platform. |
|
Rotate around Y |
Y |
|
|
Rotate around Z |
Z |
|
|
Rotate counter-clockwise around X |
Shift+X |
|
|
Rotate counter-clockwise around Y |
Shift+Y |
|
|
Rotate counter-clockwise around Z |
Shift+Z |
|
|
Scale parts |
Shift+Ctrl+S |
Opens the Scale Part dialog. |
|
Arrange parts |
Shift+Ctrl+O |
Launches the Simple Outbox Packer. |
|
Hide selected parts |
Ctrl+H |
|
|
Show selected parts |
Shift+Ctrl+H |
|
|
Show color and texture |
Ctrl+M |
|
|
Toggle No-Build Zone Visibility |
Shift+N |
|
|
Execute Lua Script |
Shift+L |
|
|
Move part in the +X direction |
Shift+Right |
These move the part in directions relative to the cardinal axes of the build platform. |
|
Move part in the -X direction |
Shift+Left |
|
|
Move part in the +Y direction |
Shift+Up |
|
|
Move part in the -Y direction |
Shift+Down |
|
|
Move part in the +Z direction |
Shift+Page up |
|
|
Move part in the -Z direction |
Shift+Page down |
|
|
Move part up |
Up |
These move the part in directions relative to the current camera perspective. |
|
Move part down |
Down |
|
|
Move part left |
Left |
|
|
Move part right |
Right |
|
|
Move part further back |
Page up |
|
|
Move part nearer to the front |
Page down |
|
|
Put part on platform |
Ctrl+Down |
|
|
Show platform |
Ctrl+P |
Toggles the display of the build platform. |
|
Show machine platform |
Toggles the display of the 3D platform model present in some machines. By default, this command has no shortcut assigned. |
|
|
Show gizmo |
Shift+Ctrl+G |
Toggles whether the gizmo should always appear for selected parts, not just when any of the transformation controls Move, Rotate, and Scale are active. |
|
Show part names |
Ctrl+L |
|
|
Show edges |
Ctrl+E |
|
|
Highlight backfaces |
Ctrl+B |
Toggles coloring the "inside" of triangles (negative normal) red. |
|
Minimize outbox |
Ctrl+Q |
|
|
Load machine workspace |
Ctrl+W |
|
|
Support module |
Calls the respective module on the currently selected part or parts, as applicable By default, these have no shortcuts assigned. |
|
|
Boolean module |
||
|
Repair module |
||
|
Copy |
Ctrl+C |
Copies a reference to the currently selected part or slice to the clipboard. This is a special clipboard that is independent from any clipboard function provided by the operating system, such as for text or image data. |
|
Paste |
Ctrl+V |
Pastes a duplicate of the copied reference to the current view, as applicable.
Note: The duplicate is pasted with the same orientation and location that the referenced part has
currently, not as it had during copying the reference. Also, if the referenced part or slice no longer exists, nothing is pasted.
|
|
Free cut |
Calls cutting with the respective mode selected. By default, these have no shortcuts assigned. |
|
|
Plane cut |
Part export
To call the part export immediately set to a particular file type, a keyboard shortcut can be set for each of the available file types. By default, no shortcuts are assigned to any of the file types.
TopRepair module
|
Highlight errors |
Ctrl+H |
|
|
Show triangle grid |
G |
|
|
Select triangles |
F5 |
|
|
Select surfaces |
F6 |
|
|
Select shells |
F7 |
|
|
Clear selection |
F8 |
|
|
Hide triangles |
I |
This is a capital i, not a lower-case L. |
|
Unhide triangles |
V |
|
|
Expand selection |
+ |
|
|
Shrink selection |
- |
|
|
Extract shells manually |
Ctrl+F7 |
Texture module
|
Paint on Triangles |
F5 |
|
|
Paint on Surfaces |
F6 |
|
|
Paint on Shells |
F7 |
|
|
Read color from triangle |
F8 |
Support module
|
Create new bar |
F4 |
|
|
Create new polyline |
F5 |
|
|
Create new volume |
F6 |
|
|
Create anchor |
F7 |
|
|
Remove anchor |
F8 |
|
|
Next support |
N |
|
|
Previous support |
B |
|
|
Show selection |
Ctrl+V |
Support structures not currently selected have their visibility toggled when using this shortcut. |
|
Hide unselected |
V |
Support structures not currently selected are hidden while you hold this key. |
|
Add polygon cut |
+ |
When editing a support cluster in 2D, this fills the area enclosed by the currently drawn polygon contour with support. |
|
Subtract polygon cut |
- |
When editing a support cluster in 2D, this removes any support in the area enclosed by the currently drawn polygon contour. |
|
Enter polygon cut |
Ctrl+U |
Enter and leave the 2D cluster editing view. |
|
Close polygon cut |
Ctrl+U |
|
|
Angle volume support |
Ctrl+B |
Toggles the control to add a knee-like angle to a selected volume support. |
|
Toggle platform |
Ctrl+P |
|
|
Toggle anchors |
Ctrl+E |
Labeling module
You can set up keyboard shortcuts to access each of the four modes of labeling directly, text, image, list, and tag. By default, no shortcuts are assigned to any of the labeling methods.
TopSlice Commander
|
|
Ctrl+P |
Show grid