Auto hole selection

Taking the example below, which has:

• twenty-four 10mm holes
• two 18mm holes
• one 40mm hole.

1. Display the Feature Selection dialog:
   • From the Hole Feature Sets context menu select Select Holes; or
   • On a Drilling strategy dialog click the Select button.
2. In the Diameter area click 10.00and then click . This enters Diameter 10 in the Selection Filter area. Now all of the 10 mm holes are selected.

   

3. Now do the same for the 18 mm holes.

   

   Now all the 18 mm holes are selected.

4. Finally, do the same for the 40 mm hole.

   

   The 40 mm hole is selected.

For more information see Select Feature.