Learn about the fabrication shape and its properties, parameters and representation.
You can add fabrication data to structural beams of any structural use, to structural columns and to braces.
Structural Column | The Construction parameters: base and top cut styles and base and top extensions are disabled. |
Structural Beams and Bracings |
yz Justification |
Start and End Extensions |
|
Start and End Join Cutbacks |
The Opening by face is replaced by the Contour cut |
|
The Cope is replaced be the parametric Cope cut |
|
The Cut by void is ignored |
|
The Cut by reference plane is ignored |
|
Detail Level | Representation |
---|---|
Coarse |
The fabrication shape representation is identical to the representation of the corespondent structural steel element. Note: The beam start and end extension parameters are ignored after the fabrication shape is created.
|
Medium | The fabrication shape is visible but without the drilling elements.
|
Fine | The fabrication shape is visible with all its cuts and drills.
|