Modify instance properties for fascia and gutters to change an individual element's angle, offset, and more.
To change instance properties, select the element and change its properties on the Properties palette.
| Name | Description |
|---|---|
| Constraints | |
| Vertical Profile Offset | Moves the fascia or gutter above or below the edge on which you created it. For example, if you chose a horizontal roof edge, a fascia moves above or below that edge. |
| Horizontal Profile Offset | Moves the fascia or gutter forward or backward from the edge on which you created it. |
| Dimensions | |
| Length | The actual length of the fascia or gutter. |
| Identity Data | |
| Comments | Comments about the roof fascia or gutter. |
| Mark | A label applied to roof fascia or gutters. Usually a numeric value. This value must be unique for each roof fascia or gutter in a project. Revit LT issues a warning if the number is already used but allows you to continue using it. You can see the warning using the Review Warnings tool. See Reviewing Warning Messages. |
| Phasing | |
| Phase Created | The phase when the fascia or gutter was created. |
| Phase Demolished | The phase when the fascia or gutter was demolished. |
| Profile | |
| Angle | Rotates the fascia or gutter to the desired angle. |