Use the
Traverse Source option to select the TRV2 file to open.
Note: The traverse adjustment dialog box is automatically opened and populated with the current TRV2 file when you use the
Load Balance Tool option from the
Traverse Editor.
When the TRV2 file is opened in the dialog box, the default adjustment method graphics are displayed in the drawing. For example, the following illustration shows a traverse with the default color for the compass adjustment type (blue) applied:
If you want to limit the adjustment to a portion of the traverse, you can specify a different
Start Point and/or
End Point.
If the traverse is open, specify the
Point of Closure to use. By default, the
Point of Closure defaults to the same point as the
Start Point regardless of whether the traverse is open or closed.
To apply angular adjustments, select the
Angular Balance check box, and then specify an
Observed Direction and a
Closure Direction if the traverse is an open traverse.
Note: Curves themselves cannot be adjusted, so line segments are added into the traverse at either the chords or the PIs to represent the curve. These line segments become new sides for the traverse, and the curves are removed. After adjusting the traverse, you can add curves back into the traverse by using AutoCAD drafting tools like the ARC, FILLET, and FITCURVEFEATURE commands.
Review the closure summary data and data for each side.
If more than one method is currently displayed in the dialog box, select the type of adjustment to apply from the
Adjustment To Apply list, and then click
Apply Adjustment.
This adds a polyline and COGO points to the drawing to represent the adjusted data.
You are also prompted to save the adjusted data to a new TRV2 file. By default, the original name of the TRV2 file is used, appended with the name of the adjustment method that is applied.
To output a traverse adjustment report
You can output a report for the currently selected adjustment method, or for all available adjustment methods. Use the
report settings, available from the Toolbox tab of the Toolspace, to specify the Client and Prepared By information that is in the report header.
Click
Home
or
View tab Palettes panelToolbox.
On the
Toolbox tab, click
Edit Report Settings.
In the
Edit Report Settings dialog box, expand the tree view and edit the values in the
Value column.
The following settings are used in the traverse adjustment report:
Client contact name
Client company name
Client address1
Owner preparer name
Owner preparer company name
Owner address1
Click
OK.
In the Traverse Adjustment dialog box, click Generate Report, and then select one of the following options:
Current Adjustment to Apply: Outputs a report for the method selected in the
Adjustment to Apply list.
All Displayed Adjustment Methods: Outputs a report for each method displayed in the Traverse Adjustment dialog box.
In the
Generate Report dialog box, specify the location and name for the report.
From the
Save As Type list, select either
Html Files or
PDF Files, and then click
Save.
Tip: The report includes a graphic which depicts the adjusted traverse. The graphic for the HTML reports is named <report name>.bmp and is saved to the same location as the .html file. This graphic is referenced into the .html file, so when you are archiving or sharing an HTML report, include both the .html file and the .bmp file.