To Add and Delete Corridor Sections

To add a corridor section

1. Select a corridor in the drawing.
2. Click Corridor tabModify Corridor Sections panelAdd A Section Find.
3. If the corridor has multiple baselines, you are prompted to select a baseline.
4. Select a manual assembly insertion station, and press Enter to add the section.

To delete a corridor section

1. Select a corridor in the drawing.
2. Click Corridor tabModify Corridor Sections panelDelete A Section Find.
3. If the corridor has multiple baselines, you are prompted to select a baseline.
4. Select a manual assembly insertion station, and press Enter to delete the section.