AVIO

AJA 16.2, Blackmagic Design Desktop Video 12.3, optional free timings in Flame Setup, and stereoscopic 3D capture & playback no longer available.

AJA Software Update

Flame Family now supports version 16.2 of AJA software.

• For Linux: The AJA software is installed or updated when you install the DKU. See the DKU topic for more information.
• For macOS: Download and install the AJA Software Installer version 16.2 from AJA support.

Note: AJA Io 4K and Io XT are not supported by AJA Software Installer 16.2. Use instead AJA Software Installer 16.0.3 (in the software archive).

Blackmagic Desktop Video Update

Flame Family now supports version 12.3 of Blackmagic Desktop Video.

To install it, download the installer from Blackmagic Design.

Removed: Stereoscopic 3D Capture and Play Out

Stereoscopic 3D Capture and Play out are no longer available in Flame Family products.

Important: Stereo 3D monitoring (with single or dual links) is still possible.

Free Timings in Flame Setup

Free timings were removed in Flame Family 2022, but upgrading from an older version still carries over the _free timings from that version. In Flame Family 2023.0.1, free timings were removed from the Preview tab of Flame Setup.

You can now create or edit free timings.

To set a preview timing to a free sync:

1. Open Autodesk > Setup.
2. Open the Preview tab.
3. Find the timing to edit, and double-click its SyncSource cell.
   Tip: Click Duplicate to create a copy of the timing.
4. Select the sync.
5. (Optional) Double-click the Description, and add _free at the end of the description; 1920x1080@25000p becomes 1920x1080@25000p_free. While not required, this modification identifies in the Project Creation window the configurations with a free sync.
6. Click Apply.