nCloth

Go to: Related nodes. Attributes.

The nCloth node applys dynamic motion to a deformable mesh. This can be used to simulate cloth behavior, as well as other deformable dynamic shapes, such as metal.

Related nodes

field, spring, nBase, nRigid

Attributes (92)

Attribute quick index omitted (too many attributes to show them all).

Long name (short name)	Type	Default	Flags
addCrossLinks (aclk)	bool	true
For faces with more than 3 vertices this will create additional stretch and bends links such that each vertex is connected to each other vertex. If this is off then the links will exactly match the meshes list of edges. For a quad meshes having addCrossLinks off would allow the cloth to shear, unless the shear resistance attribute was used.
airTightness (aits)	float	1.0
Defines the rate at which air can escape from the object, or how permiable the surface is. This is in addition to any physical holes in the model, which can be be capped or not using the seal holes attributes.
bendAngleDropoff (bnad)	float	0.0
Defines the way bend resistance changes with the angle. At higher values the bend will resist more at high angles then when the surface is nearly flat.
bendAngleDropoffMap (badm)	float	0.0
Bend Angle Dropoff map for cloth/object
bendAngleDropoffMapType (bamt)	enum	2
What type of bend angle dropoff map to use: per-vertex, texture or none.
bendAngleDropoffPerVertex (badv)	doubleArray	empty
Per-vertex bend angle dropoff for cloth/object
bendAngleScale (basc)	float	1.0
Defines the amount by which the rest state of the bend angle is scaled.
bendMap (bemp)	float	0.0
Bend map for cloth/object
bendMapType (bdmt)	enum	2
What type of bend map to use: per-vertex, texture or none.
bendPerVertex (bdpv)	doubleArray	empty
Per-vertex bend for cloth/object
bendResistance (bnd)	float	0.1
Defines the amount that the material will resist bending when under strain. Large values generally require more computation, so they may result in longer simulation times. Note that the scalingRelation attribute affects how this value is defined.
bendSolver (bnsl)	enum	1
This controls the solver method used when computing bend. The simple method has no history and defines the current bend angle each step based on the relative positions of points. This simple technique can have problems when the surface bends more than 180 degrees. This can happen during substeps even if the surface is self colliding and when it does the simple method will try to bend the surface the wrong way, which can lead to jittery motion and poor self collisions. The Flip Tracking method keeps a history of when the bend flip over 180 degrees to deal with this problem. With flip tracking one could have a surface can bend around its self several times like a spring and then unwind. However this can still have problems where the geometry looks unwound yet still the solver thinks it is wound up, which results in kinks in the surface, particularily after low quality collisions. Note that flip tracking was the default method used in versions prior to Maya2011. The high quality method is similar to flip tracking, however it only keeps a history of the flip during substeps. At the end of each simulation step it assumes that there is no flipping and that collisions have been properly resolved. This has the better quality of the Flip Tracking method without the kinking problem.
cacheUsage (cu)	enum	0
Controls the output of cache diagnostics
cacheableAttributes (caat)	enum	0
This specifies which dynamic attributes will be included the cache file when this node is cached.
collideLastThreshold (clth)	float	0.2
Defines for what values of inputMeshAttract, rigidity, or deformResistance we do a final computation after the collision resolution.
compressionMap (cmmp)	float	1.0
Compression map for cloth/object
compressionMapType (cmmt)	enum	2
What type of compression map to use: per-vertex, texture or none.
compressionPerVertex (cmpv)	doubleArray	empty
Per-vertex compression for cloth/object
compressionResistance (comr)	float	10.0
Defines the amount that the material will resist compression. Note that sometimes it is useful to have this value be lower than the Stretch Resistance, because the mesh resolution is only an approximation to a true surface, which could possibly fold within the length of a triangle. If one has a rest position for a cloth that is not flat and the compression and stretch resistance are both high then this can make cloth appear too stiff because the topology locks up. This problem is most noticable when the faces have relatively high angles relative to each other. Having a low compression resistance allows the material keep from locking up, yet still not appear to stretchy. Large values generally require more computation, so they may result in longer simulation times. Note that the scalingRelation attribute affects how this value is defined. Also stretch mapping scales both compression and stretch.
deformMap (demp)	float	0.0
Deformability map for cloth/object
deformMapType (dmmt)	enum	2
What type of deform map to use: per-vertex, texture or none.
deformPerVertex (dfpv)	doubleArray	empty
Per-vertex deformability for cloth/object
deformResistance (dety)	float	0.0
Controls how much a mesh is attracted to its current state.
drag (drg)	float	0.05
Defines the drag affecting this nBase system
dragMap (drmp)	float	1.0
Drag scaling map for cloth/object
dragMapType (drmt)	enum	2
What type of drag map to use: per-vertex, texture or none.
dragPerVertex (drpv)	doubleArray	empty
Per-vertex drag scale for cloth/object
evaluationOrder (evo)	enum	0
This determines whether links are evaluated in a cumulative or an order independant fashion. The sequential mode has a bias based on the order the links are processed. By default this order will be the edge order on the input mesh. The sequential evaluation converges on a solution much faster than the parallel form, which means that it requires less computation to make cloth non-stretchy, or rigid. If one uses the parallel method then bend and stretch resistance values will need to be proportionately higher and simulation times will generally be longer. However there will be less bias in the stretching. Also the parallel method may multithread better, somewhat offsetting the computational overhead. The sequential method can be improved in some cases by using the sortLinks attribute, which changes the evaluation order to process links near colliding points and constraints first. This can result in lower required stretch values.
ignoreSolverGravity (igsg)	bool	0
Turn off the effect of the gravity that is defined on the solver node.
ignoreSolverWind (igsw)	bool	0
Turn off the effect of the wind that is defined on the solver node.
incompressibility (incm)	float	5.0
When the volume tracking pressure model is used this defines how incompressible the internal volume of fluid is. This also will affect how much force is applied to the cloth when air is pumped in. In the case of a balloon higher values of incompressibility will overcome higher stretch resistance. Note that higher incompressibility may require more calculation time.
inputAttractDamp (iadm)	float	0.5
Defines how springy the effect of Input Mesh Attract is. At a value of zero input mesh attract will behave like a spring connection from the input mesh to the output dynamic mesh. The cloth will tend to wiggle about the input mesh position. As the Input Attract Damp is increased to 1 the cloth mesh will still move to the input mesh position but not have the momentum to travel past it, so will no longer occillate about the input position.
inputAttractMap (iamp)	float	0.0
Input Mesh Attract map for cloth/object
inputAttractMapType (iamt)	enum	2
What type of inputAttract map to use: per-vertex, texture or none.
inputAttractMethod (iatm)	enum	0
This determines if values for input attract that are 1.0 or higher will lock the positions exactly to the input mesh. Locked vertices will exactly follow the input mesh and behave like passive colliders. This can be used to make cloth more efficient as self collisions and many other calculations will not be computed for locked vertices. If the input attract is textured or has per vertex values then it will lock wherever the mapped values are 1 or greater, as long as the base input attract attribute is non-zero. There may be cases where one wants the base input attract attribute to be greater than one to increase the amount of attraction to vertices where the mapped value is less than one. If the input attract is not mapped then the entire mesh will exactly lock to the input position when the base value is 1 or greater and the lock method is used. The locking method also increases the base range of input attract to be stronger, so that 0-1 is closer to the 0-1.3 range of the non-locked method. With the lock method the mapping of the range is also less extreme. The internal strength of the inputAttract is the 5th power of the input attract value, or pow( inputAttract, 5). The internal value with the locking method is pow(inputAttract * 1.5, 3), thus the lower range of values drops (around 0.1) drops off less suddenly.
inputAttractPerVertex (iapv)	doubleArray	empty
Per-vertex input mesh attract for cloth/object
inputMeshAttract (imat)	float	0.0
Defines how attacted the cloth is to the current position of the input mesh.
inputMotionDrag (imdr)	float	0.0
Defines a drag force that follows the motion of the input mesh. Unlike input attract motion drag is not affected by how far the current mesh is from the input mesh. Motion drag is a push from the relative motion of the input mesh, not an attraction to its absolute position. This allows collisions to be respected without creating tension when the collision keeps the mesh from reaching the input mesh position.
lift (lft)	float	0.05
Defines the lift affecting this nBase system
liftMap (lfmp)	float	1.0
Lift scaling map for cloth/object
liftMapType (lfmt)	enum	2
What type of lift map to use: per-vertex, texture or none.
liftPerVertex (lfpv)	doubleArray	empty
Per-vertex lift scale for cloth/object
minimalBend (mbso)	bool	0
Use the new stretch solve to compute the stretch in one go
minimalShear (mshs)	bool	0
Use the new stretch solve to compute the stretch in one go
minimalStretch (msso)	bool	0
Use the new stretch solve to compute the stretch in one go
numSubdivisions (nsub)	integer	2
Number of subdivisions for each input/output mesh pairing.
outputMesh (omsh)	Generic	n/a
Output Geometry for soft body.
outputStartMesh (otms)	Generic	n/a
This allows one to have the start position array on the cloth shape applied to the input mesh to create an output start position mesh that is not affected by dynamics. It is useful for things like hair follicles on cloth where the start position, where the attachment of the follicles during animation is handled by nucleus, but the follicles need to be positioned on the start position in order to match the desired starting state of the cloth.
pressure (pres)	float	0.0
This defines a force applied along the surface normal direction when the Pressure Method is set to Manual.
pressureDamping (prdg)	float	0.0
Defines the air pressure damping
pressureMethod (pmth)	enum	0
The manual setting defines pressure as a simple user input value that can be keyframed. The volume tracking model computes the pressure based on the current volume of the cloth combined with inflow and outflow of air. Note that higher iterations on the air model will result in more incompressibility of the internal air.
pumpRate (pure)	float	0.0
Defines the rate at which air pressure is added to the object
restLengthScaleMap (rlmp)	float	1.0
Rest Length Scale map for cloth/object
restLengthScaleMapType (rlmt)	enum	2
What type of inputAttract map to use: per-vertex, texture or none.
restLengthScalePerVertex (rlpv)	doubleArray	empty
Per-vertex rest length scale for cloth/object
restShapeMesh (rsmh)	Generic	n/a
RestPosition Geometr(y/ies). This is the shape that the cloth tries to achieves. It may be animated over time, but should have the exact same topology as the inputMesh.
restitutionAngle (reae)	angle (float)	360.0deg
Defines how far we can bend across an edge before it will fail to go back to the rest angle when there are no forces acting on the cloth.
restitutionAngleMap (ranm)	float	0.0
Restitution Angle map for cloth/object
restitutionAngleMapType (ramt)	enum	2
What type of Restitution Angle map to use: per-vertex, texture or none.
restitutionAnglePerVertex (rapv)	doubleArray	empty
Per-vertex restitution angle for cloth/object
restitutionTension (retn)	float	1000.0
How far can the links be stretched before they fail to go back to their rest length when there are no forces acting on the cloth. When the tension is greater than the defined value the defined rest length will increase until the tension is equal this value. For very low values the material will pull apart like taffy, yet still resist stretching under mild forces.
rigidity (rity)	float	0.0
Defines how inclined the mesh is to be a rigid body
rigidityMap (rimp)	float	0.0
Rigidity map for cloth/object
rigidityMapType (rmt)	enum	2
What type of rigidity map to use: per-vertex, texture or none.
rigidityPerVertex (rpv)	doubleArray	empty
Per-vertex rigidity for cloth/object
scalingRelation (srl)	enum	0
This defines the way dynamic attributes such as bend, stretch and tension are defined relative to object scale and cv density. If Link is specified then stretch and bend are fixed values applied at each link. Thus if a mesh has more cvs it will appear to be more stretchy and bendable, even thought the amount of stretch and bend is the same on a per link basis. With Object Space the mesh will bend and stretch the same amount regardless of the resolution of the mesh. Note that this can result in significantly greater compute times for the high resolution mesh, as the individual links need to be stiffer, which requires more calculation( on top of having more links to compute ). World Space is similar to ObjectSpace, except that the stiffness of the mesh is now fixed in worldspace. Thus scaling a mesh up will make it appear to be a larger sheet made of the same material, which appears proportionately less stiff. For example a small piece of paper may bend little under gravity, but a large sheet would flop.
sealHoles (shol)	bool	true
When the volume tracking pressure method is used this determines if physical holes in the cloth model are treated as being capped or not. If holes are not sealed, then air can escape out them, which also has the effect of pushing the cloth. For example, this can simulate a rubber balloon that is suddenly released. It also allows for inflow based on motion of the cloth. The opening in a parachute will allow air to flow in as it falls down, causing sideways pressure that inflates it. Note that drag alone cannot achieve this sort of effect.
selfCollideWidthScale (scws)	float	1.0
Allows the thickness of each input/output mesh to be scaled for self collision. This value is defined relative to the CollisionWidth, so if SelfCollideWidthScale is 1.0 then the width for self collision will be the same as the collision width. If it is 2.0 then it will be twice the collision width. It can often be useful to the make the self collision width greater than that for collision with other objects, especially when using vertex self collisions.
selfCollisionSoftness (scsf)	float	0.0
obsolete
selfCrossoverPush (scpu)	float	0.0
This is a force applied along the contour where this object crosses its self. Because it only works at the point of crossover it may take several steps for the surface to pop out into a good state. If self collisions are enabled then one may wish to combine this with the selfTrappedCheck toggle because that will disable collisions for crossed over faces. It can also be used to clean up interpenetration at the start frame, although the collisions should be disabled when doing so. Lower values will take longer to resolve the self collision, but can create smoother results.
selfTrappedCheck (stpc)	bool	0
This does a surface normal based pushout of objects colliding with this one. Trapped check works on faces that are still interpenetrating after the main collision computation. It assumes that the collisions will be on the positive normal side (or outside) of the surface. It is especially useful in cases where cloth can get caught between passive objects that interpenetrate (for example an elbow passing through a chest). Rather than get stuck on the wrong side this allows the cloth to push back to the correct side when the passive objects later separate. In this case one would enable trapped check on the elbow and chest, but not the cloth. If the colliding object was inside this one, then trapped check should only be enabled if the surface normals are also set to point inward.
shearResistance (shr)	float	0.0
Defines the shear resistance for each input/output mesh. Shear can be thought of as the bend in the plane of the cloth.
solverDisplay (svds)	enum	0
Interactive display of internal solver info.
sortLinks (stlk)	bool	0
Turn on sorting of links. With a sequential evaluation order this bases the link order on distance to colliding and constrainted points, which can help reduce stretching without requiring high stretchResistance values.
startPressure (stpe)	float	0.0
With the volume tracking pressure method this defines the relative air pressure inside the object at the startframe.
stretchDamp (sdmp)	float	0.1
Defines how much the velocity due to stretch along the internal connections will be damped. Increasing this value will allow the cloth to stretch without bouncing.
stretchHierarchyLevels (shlv)	integer	0
Number of levels for hierarchical stretch solve
stretchHierarchyPercent (shpe)	float	25.0
How much we reduce for each level of the hierarchical stretch solve
stretchMap (stmp)	float	1.0
Stretch map for cloth/object
stretchMapType (smt)	enum	2
What type of stretch map to use: per-vertex, texture or none.
stretchPerVertex (spv)	doubleArray	empty
Per-vertex stretch for cloth/object
stretchResistance (stch)	float	20.0
Defines the amount that the material will resist stretching when under tension. Large values generally require more computation, so they may result in longer simulation times. Note that the scalingRelation attribute affects how this value is defined. Also one may need to additionally make the both collision iterations on the solver and constraint strength values high to keep stretching low.
tangentialDrag (tdrg)	float	0.0
Defines the component of drag tangent to the surface. With a value of zero a flat plane will slice through air with no resistance and only have drag when moving along its normal axis. With a value of 1.0 the effect of drag will be equal in all directions.
tangentialDragMap (tdmp)	float	1.0
Tangential Drag scaling map for cloth/object
tangentialDragMapType (tdmt)	enum	2
What type of tangential drag map to use: per-vertex, texture or none.
tangentialDragPerVertex (tdpv)	doubleArray	empty
Per-vertex tangential drag scale for cloth/object
usePolygonShells (ussh)	bool	0
Maintain a separtate transform for each shell, if the cloth has non-zero rigidity or deform resistance and more than one shell. This allows you to have multiple rigidish objects within one mesh
windSelfShadow (wssh)	bool	0
Allow the object to shadow parts of itself from the wind.
wrinkleMap (wkmp)	float	0.0
displacement style mapping that affects rest shape
wrinkleMapScale (wms)	float	1.0
Defines the amount of wrinkle map displacement. Negative values push wrinkles in instead of out. The value may need to be large if the scene scale is large.
wrinkleMapType (wmt)	enum	2
What type of wrinkle map to use: per-vertex, texture or none.
wrinklePerVertex (wpv)	doubleArray	empty
Per-vertex wrinkle for cloth/object