Modify a Form Profile

Edit profiles or paths from which forms are created.

1. Select a profile, path, or surface to edit.

   In some cases, such as in sweeps or swept blend, this may be easier in x-ray mode.

2. Click Modify | Form Element Mode panel (Edit Profile).

   The drawing area will enter sketch mode. However, forms made from reference geometry will not have a sketch mode and will require direct modification to the reference geometry.

3. Use the drawing tools on the Modify | Form Element > Edit Profile tab to edit the profile. Particularly useful is the Workplane Viewer.
   Note: When editing locked profiles, you can only edit the main profile. Typically this profile is hosted by a reference level or plane.
4. Click (Finish Edit Mode).