Use the Site Settings dialog to view or change site settings.
To change site settings properties, click Site tabModel Site panel.
Name | Description |
---|---|
Contour Line Display | Displays contour lines. If you clear the check box, custom contour lines still display in the drawing area. |
At Intervals of | Sets the interval between contour lines. |
Passing Through Elevation | Contour intervals are based on this value. For example, if you set the contour interval at 10, contour lines display at -20, -10, 0, 10, 20. If the Passing Through Elevation value is set to 5, lines display at -25, -15, -5, 5, 15, 25. |
Additional Contours | |
Start | Sets the elevation where additional contour lines begin. |
Stop | Sets the elevation where additional contour lines no longer display. |
Increment | Sets the interval for additional contour lines. |
Range Type | Select Single Value to insert one additional contour line. Select Multiple Values to insert additional incremental contour lines. |
Subcategory | Sets the type of contour lines to display. Select a value from the list. To create a custom line style, open the Object Styles dialog. On the Model Objects tab, change settings under Topography. |
Section Graphics | |
Section cut material | Sets the material that displays in a section view. |
Elevation of poche base | Controls the depth of the cross-section of earth (for example, –30 feet or –25 meters). This value controls the poche depth for all topography elements in your project. |
Property Data | |
Angle Display | Specifies the display of angular values on property line tags. You can load property line tags from the Annotations > Civil family folder. |
Units | Specifies the units to use when displaying bearing values in the Property Lines table. |