In the Profile View Properties dialog box, click the Bands tab.
In the List of Bands area, select either the bottom or the top of the profile view as the location for the new data box.
Select a band type and style. Click Add.
If you add the Profile Data band type, use the Geometry Points to Label in Band dialog box to specify the individual alignment and profile points to label with the selected style.
If you want to add more bands to the profile view, repeat steps 3 and 4. The List Of Bands is arranged in the same order as the actual bands on the profile view.
Use the three buttons on the right side of the List Of Bands to arrange the bands as desired. You can move selected data boxes up or down in the stack, and delete unwanted bands .
Optionally, click Save As Band Set to save this arrangement of data boxes as a set for reuse with other profile views.
Click OK. The bands are displayed in the profile view.
Note:
You can manually update point proximity bands, or you can enable a setting so that they are updated automatically when COGO points change. Other profile view bands are always updated automatically. For more information, see To Update Point Proximity Bands in Profile View.