Pipe/Pressure Network Page (Create Profile View Wizard)

Use this page to specify which pipe networks or pressure networks to include in the profile view.

Note: This page is not available if there are no pipe networks or pressure networks present in the drawing.

Select Stacked View To Specify Options For

Note: This control is not available if the Show Offset Profiles By Stacking Views check box on the General page is cleared.

Displays a list of the associated longitudinal section views. The number of profile views in this list depends on the Number Of Stacked Views specified on the Associated Longitudinal Section page. Select a profile view from the list, and then use the Select Pipe Networks To Draw In Profile View table to specify the pipe network display settings for that associated longitudinal section view.

Select Parts From Screen

Select parts by clicking in the drawing window. Click then follow the prompts at the command line.

Select Pipe Networks to Draw in Profile View

Use this list to select networks and parts. By default, this list is populated with all pipe networks and pressure networks in the current drawing.

Select All Networks

Selects the Select check box for all networks and parts listed in the table.

Deselect All Networks

Clears the Select check box for all networks and parts listed in the table.

Name

Specifies the name of the network and its parts.

Select

Specifies whether a network or part is drawn in the profile view. The check box displays one of three states:

Not Selected. If a part is not selected, it is not drawn. If a network is not selected, none of its parts are drawn.

Selected. If a part is selected, it is drawn. If a network is selected, all of its parts are drawn.

Partially selected. If a network is partially selected, only its selected parts are drawn. Parts cannot be partially selected.

Show Only Parts Selected

Specifies whether to display only the parts that are selected to draw in the profile view.