Use this procedure to specify whether a selected opening will use the cut plane of the containing object when anchored to that object in the current display representation. Note that cut plane display properties apply only to display representations, such as Plan, that are used in the Top view (plan view) of a drawing.
- Double-click the opening.
- On the Properties palette, click the Display tab.
- Under the General category, for Display controlled by, select This object. Note: To apply your changes to all openings in the drawing, select Drawing default setting.
- For Display representation, verify that the desired display representation is selected.
- If necessary, expand Object Display Properties
Cut Plane. - For Use cut plane of containing object when anchored, select Yes or No.